Pairing Aqara Smart Wireless Switch WXKG11LM

[saxn-paule]

Hello,

your list of supported devices contains the Aqara Smart Wireless Switch WXKG11LM.

Unfortunately I'm no able to pair it in the Phoscon App.

In the switches category there is no matching manufacturer. Trying to pair it via "Sensors --> Other" it isn't recognized.

Produkt ConBee Version 2.05.23 / 24.4.2018 Firmware 261F0500

Phoscon says that no updates are available.

Some advices?

[manup]

This might be WXKG11LM Rev.2 which identifies itself with model identifier lumi.remote.b1acn01 can you confirm that?

I don't have the switch yet which makes testing a bit cumbersome, there is already code for it active but it seems not to work properly.

[saxn-paule]

Where can I see this information? I have a Conbee connected to a RasPi3 and installed deconz in headless mode.

Buttons have manufacturing date 05/2018

[manup]

You may try a recent version (make sure to create a backup first), the switch might be visible in the REST-API, but not yet the Phoscon App switch editor.

https://github.com/dresden-elektronik/deconz-rest-plugin#precompiled-deconz-packages

[saxn-paule]

Thank you very much.

With Version 2.05.45 / 2.11.2018 and Firmware 262E0500 the switch could be found as sensor and is available via the API as lumi.remote.b1acn01

Will there be a frontend representation in Phoscon App in the near future too?

[saxn-paule]

On press the button provides the value "1002". On hold the status "1001" is send after some seconds. On release the status "1003" is send (only if "1001" was sent before.

Maybe this is helpful.

[manup]

Ok that means API works correctly.

Will there be a frontend representation in Phoscon App in the near future too?

Yes the plan is to support all Xiaomi switches as soon as possible, I hope to receive the missing ones in the next 2 weeks to complete integration.

[saxn-paule]

That are great news :D

I'm waiting for my wall switches too.

I think this issue could be closed.

Thanks for the support.

[ACrazyConcept]

I also have 2 WXKG12LM i believe the model is. They do not come up in Phoscon, but they do in deCONZ and they work. Except one does not send the long press events. But maybe that is the device and not deCONZ's fault.

[manup]

I also have 2 WXKG12LM i believe the model is. They do not come up in Phoscon, but they do in deCONZ and they work. Except one does not send the long press events. But maybe that is the device and not deCONZ's fault.

Can you please provide the REST-API output of the WXKG12LM switch?

I'm working on the documentation to get a clearer picture of which button events are supported by each model.

https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Xiaomi-WXKG11LM-2016

https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Xiaomi-WXKG11LM-2018

https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Xiaomi-WXKG12LM

[saxn-paule]

Cool, I didn't know about the doubleclick feature yet. Works for me (1004) . Thank you.

[ACrazyConcept]

@manup Sorry, I was wrong. It is also the WXKG11LM (b1acn01) I have. It has single double and hold/release like listed in that link.

[Elliott32224]

It's been over a couple of weeks, so I thought I would check. Anything happening with the fix for this? As for others, I have Phoscon issues with WXKG11LM (b1acn01). Thanks. Elliott

[manup]

In the last days more details were collected and documented to be used as base to complete the implementation (see the linked pages in supported devices wiki) hopefully my switches arrive soon to simplify testing.

[Elliott32224]

Thank you.

[esseki]

Hi manup,

while working on the Xiaomi switches, can you please make sure to also include the "WXKG01LM" corresponding to the "Original Xiaomi Mijia Smart Home Zigbee Wireless Smart Switch" aka "the round button" (https://xiaomi-mi.com/mi-smart-home/xiaomi-mi-wireless-switch/). I'm concerned that this button might be forgotten as I don't see any reference to it, in the "Supported devices" section of the wiki (https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Supported-Devices) while it works flawlessly with Deconz since a while (see https://github.com/dresden-elektronik/deconz-rest-plugin/issues/349).

I gathered all the information from Deconz Rest API running from the following setup :

• Product : ConBee
• Version : 2.05.49 / 30/11/2018
• Firmware : 262F0500

in case it can help to create the corresponding wiki page :)

Xiaomi WXKG01LM

Original Xiaomi Mijia Smart Home Zigbee Wireless Smart Switch. Model: WXKG01LM (Round button)

Joining

1. Start sensor search in Phoscon App
2. With a needle, press and hold the small button in the hole located on the back of the button for around 5 seconds until LED blinks

REST-API

GET /sensors/

{ "config": { "battery": 100, "on": true, "reachable": true, "temperature": 0 }, "ep": 1, "etag": "844d46fa615f3ca23e7b99e4bcf92f3c", "manufacturername": "LUMI", "mode": 1, "modelid": "lumi.sensor_switch", "name": "Interrupteur", "state": { "buttonevent": 1002, "lastupdated": "2018-12-02T13:42:22" }, "type": "ZHASwitch", "uniqueid": "00:15:8d:00:01:64:48:bf-01-0006" }

Button events

simple press : 1000 simple press release : 1002 double press : 1004 treble press : 1005 quadruple press : 1006

[manup]

Good catch, yes I didn't have it on the radar, will be added too.

Still a bit confused about the 1000/1002 As I understand it the switch supports:

short press: 1000 short release: 1002

But the switch doesn't support hold (1001) hold release (1003)?

[esseki]

As I understand it the switch supports: short press: 1000 short release: 1002 But the switch doesn't support hold (1001) hold release (1003)

Exactly. That's a kind of weird behavior from this first version of the Xiaomi button. But it supports up to 4 clicks ;)

[manup]

Ok thanks for the details I've added it to supported devices and created a page for it, lloking forward to add it in Phoscon App Switch Editor soon

https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Xiaomi-WXKG01LM

[manup]

The WXKG11LM variants are now supported in deCONZ version 2.05.50.

https://github.com/dresden-elektronik/deconz-rest-plugin/releases/tag/V2_05_50

[esseki]

Hi @manup,

immediately after I saw the release of 2.05.50 I updated my setup. But I could not find the way how to use the switch editor with my Xiaomi round buttons. Here is what I tried :

• for the buttons that were already included in my setup before 2.05.50 : I tried the switch editor for one of my groups. The problem is that I don't see my Xiaomi round button in the "select switch" screen (when my Ikea and Hue switch appear). See the screenshot:

• Then I tried adding a new button. When I went to "switches / Add a new switch" I did not see the brand Xiaomi. I tried to add a button without any success. I then went to "sensors / Add a new sensor", I could add my Xiaomi button but it does not appear in the list of sensors (it did not appear either before 2.05.50). It does not appear in the list of switches either. It shows in the Rest API "/api/apikey/sensors/" but that's it. I can not find this new button in the switch editor for a group.

What am I missing ?

[manup]

The round button – WXKG01LM is not supported yet, only the switches listed in the release notes. I've ordered two round buttons via Gearbest, hopefully they arrive soon to complete integration.

[saxn-paule]

Today my second charge of WXKG11LM arrived. If I could trust the prints on package and button, it is the 2018 version.

In phoscon it's detected as the old version (no Rev2.0 behind model).

The problem is, that I only get 1002 and 1004 events. No tripple, quad or long press events at all.

Manufacturing date is 10/2018

The upper one is a Rev 2.0 from my last order, the lower one is the new one from yesterday. As you could see, the glue pad is also much thinner.

The new package also doesn't include an extra glue pad for later reuse.

[saxn-paule]

Okay, forget about it. I pressed the button too short. Its a rev 1 and tripple/quad press works.

So it seems to be luck wich version you get.

[manup]

Interesting, which firmware version do they show?

So it seems to be luck wich version you get.

Sadly yes, it's hard to tell from the shop descriptions which version it is.

[saxn-paule]

Interesting, which firmware version do they show?

How could I see this? Running deconz (2.05.50 / 262F0500) in headless mode on a Raspi 3.

[manup]

In the Phoscon App > Menu > Switches > Switch Details

I guess the date code as version is only queried and shown in newer deCONZ versions. On older versions usually all Xiaomi devices report 3000-0001 as version which isn't helpful.

[saxn-paule]

There is no version shown on all my Aqara devices:

[manup]

Jep, this is only queried from the devices in newer versions 2.05.51 and 2.05.52. It may take up to one hour, until the version shows up.

[saxn-paule]

Well, then lets update to the .52 version ;)

[manup]

And backup first ;)

[saxn-paule]

Always :)

[saxn-paule]

My first order is version "20180525". The ones from yesterday "20161128"

So I definitely got version 1. :(

[Xento]

I try to pair a WXKG11LM but it doesn't work. I'm using this versions: 2.05.52 / 16.12.2018 262F0500

[saxn-paule]

You need to pair it as a sensor. Press the small button and hold it for some seconds. Then press the big button several times. Worked for me with all 8 buttons.

[Xento]

Oh, its my fault. I didn't noticed the small button ... I only pressed the big button for some seconds until it flashed ...

[Mr-REM-Esq]

I try to pair a WXKG11LM as a sensor but it doesn't work. I'm using this versions: Version 2.05.59 / 14.02.2019 Firmware 262F0500

[manup]

How do you pair the device?

Usually:

• Start sensor search
• Press the small button on the side until the led blinks

[Mr-REM-Esq]

Sure. I did it the way you described it. Start sensor search, then press the small button on the side until the led blinks. It blinked 7-10 times and went out. Connection did not happen. Before that, I successfully connected two Aqara temperature sensors. The same button successfully worked with an earlier version of deconz.

[ademobile]

With my issues with IKEA sensors stopping working (events being forwarded #1220), I thought in the meantime to help remove the grief I am getting over this, I ordered one of these switches. It pairs, can be seen by Phoscon and GUI, however I am not getting any events from it. Also if I assign it to a group, it does not switch it. I seems to be the same issues as above. Here is what I can see:

So I am still stuck, and I am using the same versions as above

[ademobile]

As I need to get this switch work, I spent all morning, removing and adding it again, as I felt that it must work to get as far as I did. After a few attempts it started to work! Don't ask what I did (the only thing different was I pressed the middle button over and over whilst waiting for it to be 'seen')

[alinelena]

I do not seem to see how can one configure hold/long release events in switch editor. I see the events in the log.

[Mr-REM-Esq]

Unable to pair WXKG11LM in version 2.05.60 too.

[haakonstorm]

WXKG11LM here. Latest version of everything. HASSIO, RaspBee, RPI3B+. Most of the Aqara devices I got are now more or less running OK, either directly or via REST. The devices I can't get to join are these simple buttons. Not sure about the following, did anyone get any 100% info:

1. How to reset
2. How to set in pairing mode

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[Franco757]

Hi,

I am trying to pair an Aquara mini switch WXKG11LM with my ConBee II Phoscon (ver 2.13.04 12/18/2021, Firmware 26660700) attached to a RPI3B+ running home asssitant 2021.12.8 but not successful.

I am able to pair and use Aqara temperature/door/water/motion sensors without any issue but not the mini switch.

I tried to pair it as a sensor and a switch.

Any thoughts? Thanks

[Mimiix]

@Franco757 please search this git as it's a known issue.

[Franco757]

I have and the suggestions do not work.

[Mimiix]

It's a known issue that it broke with the latest stable. Fix will be in next beta.

[insalada]

I have the same problem as some users above. All my aqara devices are perfectly recognized and working via Phoscon, except with aqara mini switch (WXKG11LM). I have tried everything, as a switch and as a sensor, all possible combinations, but no success so far. I am in the last version of Home Assistant and using conbee II. Any suggestion will be welcome. Thanks.

[Franco757]

@Mimiix this case has been closed and merged with #5647.

5647 is listed as closed with a modificaton in the CPP file.

What are the users running Phoscon via HA running on a PI + ConBee II supposed to do with that modified CPP file? I doubt we have to recompile the software ourselves. Thanks