Closed nicolalandro closed 3 years ago
Any update on this?
Up to now no one ask me anything, I try also with the deCONZ UI, I see it but this view is a bit difficult, and I do not understand how to set up my device, is there some guide to use this instead of phoscon while the problem will be resolved?
Have you tried phoscon.de/pwabeta? The device should be visible there.
If I access with this link direct the site seams does not work, there is any solution to access the pwabeta from HomeAssistant?
Maybe try this? phoscon.de/pwabeta/login.html#host/<local-ip-adress>:<port>
In that way I have (like the first) an error in the console that say "unautorized" and I see the phosco GW but the click does not have effect so I cannot login
Did you activate the port in the settings as describe here? Typical this is port 40850 https://github.com/home-assistant/addons/blob/master/deconz/DOCS.md#using-the-deconzphoscon-api-with-another-add-on
I do it now, but the problem does not change, I also try to use http://
You need to use it like this: phoscon.de/pwabeta/login.html#host/IP:40850
Yes that is the link that does not work.
By enabling with a plugin CORS origin call It ask me the password but after I cannot login, also the IP showed under the phoscon gateway is not a local net ip
Can you try it in a new private browser tab. You need the IP from the host (Raspberry Pi), not the internal.
This is what happen, I cannot click on the gateway.
By enamble CORS request by a plugin, I can arrive to put the password but into the gateway I see 172.30.33.0 that is not a local network IP.
Similar issue here. After a while (10 seconds or so), the above screen changes to a login screen and it asks me for a password, but when I use the Phoscon app password that is known to me (I use it all the time from deConz in Home Assistant), it gives me a 'Login failed'. Tried different browsers, private Windows etc. Even tried resetting the password, but it doesn't let me: “Failed to reset password Make sure the gateway was powercycled recently.” while I just power cycled the device.
Anyone any clue? :)
EDIT: Managed to fix this, by going to deCONZ add-on in HomeAssistant and adding the right port to the config:
After that, I was able to access the Phoscon Beta environment with the right IP address (not 172 but 192).
I managed to add STYRBAR to the switches, but can't connect it to any bulb yet, because it doesn't show up when I press 'Link switch'.
Ok I try to reinstall a clean version of Home Assistant and I arrive to PhosconBeta correctly, but I cannot see STYRBAR, so It is not visible yet, and also by searching it is not found. How can I procede @YKO-de ?
@nicolalandro it works now in the pwa beta. Will be integratet in the next update.
@SEK-DE Today I re-tried to pair STYRBAR from PhosconBeta again but unfortunatly whithout success
@nicolalandro which deCONZ and Firmware is running? And did you try it in the beta? http://phoscon.de/pwabeta
@SEK-DE Below it's report the version of deCONZ and Firmware Yes i used Phoscon beta
@SEK-DE I just updated the firmware but STYRBAR continue to don't pair
@SEK-DE I just updated the firmware but STYRBAR continue to don't pair
Your firmware means "Not connected!" which means you can´t pair anything. 2 reasons for this at the moment: interferences with other devices like Router, Repeater, Dongles etc. or USB devices. Second one is a error during the update procedure. Please check those and give me feedback.
@SEK-DE Sorry I upload the wrong screen (before refresh after update procedure)
@nicolalandro thx for your cooperation. Now your ConBee II is running at a version from oktober 2k20. Here is an overview of all versions: http://deconz.dresden-elektronik.de/deconz-firmware/ Please make sure, that you run the latest Firmware Version 266b0700. In our Test-Setup we use the deCONZ 2.12.00 and the latest Fw. Sometimes it may take a while till our latest versions where integratet in HA. Acctually i don´t know the latest HA deCONZ version, is it 6.9.0? Sometimes you have to be patient in terms of a HA system or use a native system.
I'm having the same problem where I still can't connect the Styrbar, even in Phoscon Beta. I don't have deconz 2.12.00 yet though. The latest version is 6.9.0 indeed. Firmware version 26660700. Hope a new version will soon be released, I want to connect my Styrbar :D.
We still investigating here, so don´t worry. If you have the time and a SD card, use an image from our homepage (https://phoscon.de/en/conbee2/sdcard) and try if the Styrbar works for you without HA. That would be great for us, because actually we dont see any issues here in our setup 😅
@SEK-DE,I installed the "Homebridge-hue + Raspbian Buster" (deCONZ: 2.12.00 Version: 5-2021 released: 25/5/2021) on new SD card. I tryed to pair Styrbar but it continue to doesn't work.
@SEK-DE After differents try, STYRBAR is now paired. It paired only after pairing another button. Unfortunately trying to re-pairing STYRBAR another time and it doesn't work. In the next days I will try to understand which is the condition when it pair.
PS. when STYRBAR was paired it, only one button worked.
@SEK-DE,I installed the "Homebridge-hue + Raspbian Buster" (deCONZ: 2.12.00 Version: 5-2021 released: 25/5/2021) on new SD card. I tryed to pair Styrbar but it continue to doesn't work.
It seems you are still at firmware 26660700. You should update manually with your SD card that includes the Phoscon image to 266b0700.
@letszb I updated the firmware to the latest beta version available Now STYRBAR is pair but I cannot assign the lateral buttons (circled in red in picture)
As there hasn't been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.
@SEK-DE @letszb do you have any news? Do you need some more information?
Please try it with 2.12.3 @nicolalandro we did it today and have no problems with Styrbar.
I update to last version and it work! Thank you!
As we can see at this link the deCONZ GUI show the device, but from Phoscon I cannot pair it.
When this new Ikea device will be implemented in phoscon?