search

dresden-elektronik / phoscon-app-beta

Access to Phoscon app beta
78 stars 5 forks source link

Switch Editor does not save edits for Bush Jäger Light link switches #410

Closed joecomo67 closed 2 years ago

joecomo67 commented 3 years ago

My DeConz Version is 2.12.03 / 12.7.2021 - Firmware is 26390500. I can connect my Busch Jäger "Bedienelemente" (the 2 and 4 switch version Model ID 6737-84 - FW is 1.2) to Phoscon (and they appear as routers in DeConz). I can also edit them in the Switch editor - however when I have finalized an action and press the "Save"/"Übernehmen" Button, it does not save the action but jumps back to the initial screen of the switch editor.

I tried with a completely new switch as well and I always get this behavior - it worked with an older DeConz version, but I do not remember which one. For other switches (e.g. Philips) all works fine. There was an older issue #240 which was potentially on the same topic - but closed as stale. Any hint to a fix - or when this was broken would be great.

Thanks a lot yours

Joachim

PS: I can provide you with more Information, screen-shots etc. if required

haraldknoll commented 2 years ago

Have exactly the same problem. Cannot configure the Busch Jäger elements anymore in the Phoscon GUI. Modifying an existing one is also not possible, because it deletes the assignment completely. BR, Harald Update: Did a downgrade to 2.12.01 / 14.6.2021 and the Busch Jäger switches work again. All newer releases are broken.

joecomo67 commented 2 years ago

thanks for the advice - Also in my case initially the setup worked.

An update broke it - either the Busch-Jäger Switches or the IKEA-Tradfri stay in the network, but not both.

haraldknoll commented 2 years ago

Switch editor still broken in 2.12.06 / 19.8.2021 for Busch and Jäger switches. GUI switch back to main selection of switches. Broken link?

joecomo67 commented 2 years ago

not sure it is a broken link - it worked, when I did a clean setup (which it wouldn't if the link was broken). I suspect some issue between Busch-Jaeger and Tradfri. Unfortunately this is in my vacation home - so I can only test once I am back there.

haraldknoll commented 2 years ago

no, i am talking about the switch editor in the GUI. I have only B&J switches. After 2.12.01 the GUI ignores the switch assignment. I guess it is just a broken link to the next page. After the final switch assignment you end up here without the chance to assign the keys with the selected function.

2021-08-20 10_49_28-Window

letszb commented 2 years ago

There is currently a bug in the Phoscon App for the Busch-Jaeger switches. But it's fixed and will come with the next release.

stale[bot] commented 2 years ago

As there hasn't been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

stale[bot] commented 2 years ago

As there hasn't been any response in 28 days, this issue will be closed. @ OP: If this issue is solved post what fixed it for you. If it isn't solved, request to get this opened again.