Mechanical Final Touches

[drewsum]

To finish off the mechanical assembly, we need to:

• order two angled support T-slotted frame bars to ensure the display stands upright, along with another T-slotted base bar to make the frame a sort of "Eisel".
• We also might want to use that spare T slotted bar we have laying around as a center support.
• We should mount all the circuit boards to the back acrylic brackets as well as the chassis power supply. * Finally, let's decide where we want the rotary encoder and master on/off switch to go, as well as the AC inlet.
• We should definitely put more thought into the AC inlet to make sure it's safe and impossible for live wires to become exposed.
• We should ground the aluminum frame to the ground wire on the power supply chassis to ensure it's safe to handle.

[drewsum]

What we have yet to do as of 4/2/2019:

• We should 3D print a housing around the AC inlet to mount it to the T slotted bar frame.
• We should ground the aluminum frame to the ground wire on the power supply chassis to ensure it's safe to handle.
• We also might want to use that spare T slotted bar we have laying around as a center support.
• We should use that short stubby piece of T slotted bar as feet for the legs.

[drewsum]

Update as of 4/27/19: I hot glued the AC input stuff to try to make it safer. We should still ground the frame eventually. We should take the project apart and try to get all of the gaps out and remove the extra fasteners in the T-slotted frame