LCD

[drewsum]

https://www.digikey.com/en/products/detail/globaltech-display/GLT035320240IS1-CTP/16588709

[drewsum]

• Needs to support at least the resolution of the Lepton3.5 sensor (i dont remember what this is)
• Would be nice to match the aspect ratio of the sensor but not required since we can scale the video frames
• Would be nice to have it a decent size but not huge
• Cap touch screen maybe? Lets talk about user interface in another gitlab issue, i have ideas
• Should match one of the IO types that the PIC32MZ DA GLCD controller can output, I'm unsure of the options but it should be captured in the datasheet, also see the PIC32 GLCD "reference manual" doc (WVGA? idk what any of these are or what they mean)
• RGB888 data format (PIC32 GLCD controller does 24 bit color)
• Match IO voltage level of PIC (+3.3V or +3.0V)
• Preferably not super expensive

[drewsum]

This seems like a thing a person could use to drive the LED backlight to an LCD, it seems to be made to run off a lithium battery, it's super small, looks like it supports PWM dimming (although I've had mixed luck with these kinds of claims in the past), and has a symbol in KiCad laready

https://www.analog.com/media/en/technical-documentation/data-sheets/3465fa.pdf

[drewsum]

https://www.digikey.com/en/products/detail/globaltech-display/GLT035320240IS1-CTP/16588709

This went out of stock and doesnt seem to have much availability anywhere else.

[drewsum]

https://www.digikey.com/en/products/detail/globaltech-display/GLT035320240IS1-CTP/16588709

This went out of stock and doesnt seem to have much availability anywhere else.

Back in stock, and this FFC connector could probably work: https://www.digikey.com/en/products/detail/gct/FFC2B35-54-G/15970872