dritcey optiboot issues

dritcey / optiboot

Automatically exported from code.google.com/p/optiboot

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

VIRTUAL_BOOT doesn't work

#120 GoogleCodeExporter opened 8 years ago
3
Add explicit copyright in all source files.

#119 GoogleCodeExporter opened 8 years ago
0
"omake" build tools don't work with Arduino 1.5.x and 1.6.x IDE versions

#118 GoogleCodeExporter opened 8 years ago
1
Documentation doesn't explain optiboot use OUTSIDE of Arduino environment.

#117 GoogleCodeExporter opened 8 years ago
1
Triggering of watchdog when using SOFT_UART option

#116 GoogleCodeExporter opened 8 years ago
2
Consider making the boot timeout a Make option

#115 GoogleCodeExporter opened 8 years ago
1
Works without issue on atmega644p

#114 GoogleCodeExporter closed 8 years ago
1
baudcheck doesn't pay attention to SINGLESPEED

#113 GoogleCodeExporter opened 8 years ago
1
LED_DATA_FLASH possible issue

#112 GoogleCodeExporter closed 8 years ago
2
Fast start mod doesn't always work on Uno boards.

#111 GoogleCodeExporter opened 8 years ago
1
Drop support for memory reads/writes with length longer than 256 bytes

#110 GoogleCodeExporter closed 8 years ago
8
OPTIBOOT_CUSTOMVER is not working

#109 GoogleCodeExporter opened 8 years ago
2
BIGBOOT=1 results in section overlapping

#108 GoogleCodeExporter opened 8 years ago
2
Recent AVRDUDE unhappy with efuse values in atmega328_isp targets

#107 GoogleCodeExporter opened 8 years ago
1
Content of AVR_FREQ gets messed up --> F_CPU set to invalid characters (random?)

#106 GoogleCodeExporter opened 8 years ago
9
bobuino optiboot makefile LED pin != pins_arduino.h LED pin

#105 GoogleCodeExporter closed 8 years ago
3
optiboot is wrong but "lucky" on chips (1280, 1284) with 256 bytes/page

#104 GoogleCodeExporter closed 8 years ago
3
omake doesn't work with Arduino 1.5.x directory structure.

#103 GoogleCodeExporter closed 8 years ago
1
Permit 1Mbps BAUD_RATE

#102 GoogleCodeExporter closed 8 years ago
2
Doesn't compile with gcc4.7 or gcc4.8

#101 GoogleCodeExporter closed 8 years ago
8
Split makefile for production/extra platforms

#100 GoogleCodeExporter closed 8 years ago
3
Support application section writing to flash, on big parts?

#99 GoogleCodeExporter opened 8 years ago
0
Save space by rebooting more slowly

#98 GoogleCodeExporter opened 8 years ago
1
MCUSR is cleared in bootloader

#97 GoogleCodeExporter opened 8 years ago
6
optiboot 5.0a with atmega8@8MHZ does not work but v4.4 does.

#96 GoogleCodeExporter opened 8 years ago
2
optiboot build on Mac

#95 GoogleCodeExporter closed 8 years ago
2
EEPROM r/w support

#94 GoogleCodeExporter opened 8 years ago
10
Missing bootloader for Atmega1280 in optiboot-v5.0a.zip

#93 GoogleCodeExporter closed 8 years ago
3
optboot 5.0a - more than 64k?

#92 GoogleCodeExporter closed 8 years ago
2
GitHub migration

#91 GoogleCodeExporter closed 8 years ago
6
bash should be used instead of sh

#90 GoogleCodeExporter closed 8 years ago
4
Sketch seems bigger after upload

#89 GoogleCodeExporter closed 8 years ago
4
Make on windows - ld crashes?

#88 GoogleCodeExporter opened 8 years ago
5
load osccal for use with 8M internal oscillator.

#87 GoogleCodeExporter opened 8 years ago
2
Optiboot v5.0 doesn't make

#86 GoogleCodeExporter closed 8 years ago
3
baudcheck bad substitution

#85 GoogleCodeExporter closed 8 years ago
4
boards.txt has incorrect upload.protocol

#84 GoogleCodeExporter closed 8 years ago
1
Some options not specifiable to OFF state.

#83 GoogleCodeExporter opened 8 years ago
0
BIGBOOT could store build information

#82 GoogleCodeExporter opened 8 years ago
0
Use of double-speed BRG on UART should be an option.

#81 GoogleCodeExporter opened 8 years ago
0
Implement PRODUCTION and NONPRODUCTION targets.

#80 GoogleCodeExporter opened 8 years ago
1
Provide warnings for inaccurate baud rates.

#79 GoogleCodeExporter closed 8 years ago
1
Many board-level targets are obsolete...

#78 GoogleCodeExporter opened 8 years ago
1
Support ATmega32

#77 GoogleCodeExporter closed 8 years ago
2
Oscillator fuse value: low power vs full swing

#76 GoogleCodeExporter closed 8 years ago
2
RAMPZ ignored in NRWW determination

#75 GoogleCodeExporter closed 8 years ago
3
Clarify and update boards.txt

#74 GoogleCodeExporter opened 8 years ago
4
Save about 20 bytes by using a smarter version of LPM/ELPM.

#73 GoogleCodeExporter closed 8 years ago
1
Patch for /optiboot/boards.txt

#72 GoogleCodeExporter closed 8 years ago
3
Optimize optiboot.c for manual m328 reset

#71 GoogleCodeExporter closed 8 years ago
2