search

droneprojetsn2 / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega
0 stars 0 forks source link

APM2.0 GPS 3DFix solid blue but no GPS visible to Missioon Planner #642

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1.  Wait for solid 3DFix connect to Mission Planner
2.
3.

What is the expected output? What do you see instead?
All sensors function normally except the GPS.  ABC lights normal cycling on 
connection, but no blue shows with GPS lock.  B shows dull yellow.
Mission Planner fully functional on all inertial sensors, magnetometer, and 
baro altimeter

What version of the product are you using? On what operating system?
New APM2.0 Mission Planner 1.1.86 running in Vista.  Connection over USB.  JP1 
in place.  

Firmware - I initially loaded latest release AC software, then tried with AP

Please provide any additional information below.

I have attempted various combinations of APM reset and disconnect.

Original issue reported on code.google.com by gordon.j...@gtempaccount.com on 18 May 2012 at 11:00

GoogleCodeExporter commented 8 years ago 
Problem now solved.  All sensors of APM2.0 now working well.

Issue was apparantly due to inadequate signal connection between the main board 
and the shield.

Original comment by gordon.j...@gtempaccount.com on 20 May 2012 at 8:25

GoogleCodeExporter commented 8 years ago

Original comment by Meee...@gmail.com on 21 May 2012 at 9:09