Nikon D7100 - Impossible to change the ISO value to "ISO auto"

[GoogleCodeExporter]

What is the expected output? What do you see instead?

If you open the "Select ISO value" dialog the "ISO-auto" value is missing.
Also you can't change the ISO value, if "ISO-Auto" is set in the Nikon D7100. 
Then every value you set in this dialog has no effect.

What version of the product are you using? On what operating system?
0.30.27_3
Acer Iconia Tab A700 with Android 4.1.1
Nikon D7100 (Firmware 1.01) connected with USB cable

Original issue reported on code.google.com by svenimta...@gmail.com on 23 Aug 2013 at 7:05

[GoogleCodeExporter]

ISO auto settings is a different property. If you enable Auto ISO then the 
regular ISO control is disabled and the camera is not allowing to change it.

Original comment by hub...@gmail.com on 23 Aug 2013 at 8:08

[GoogleCodeExporter]

You are right, it's a different property.
This property can't be set in dashboard, right?
Also not in host mode?
If possible, it would be useful to disable ISO setting in dashboard, if the 
camera is in auto-iso mode.

Original comment by svenimta...@gmail.com on 25 Aug 2013 at 11:12

[GoogleCodeExporter]

>>it would be useful to disable ISO setting in dashboard
you mean the ISO button should be disabled when auto-iso is enabled in camera?

Will see to add the auto-iso property in upcoming versions.

Original comment by hub...@gmail.com on 25 Aug 2013 at 12:12

[GoogleCodeExporter]

camera?

yes

Original comment by svenimta...@gmail.com on 25 Aug 2013 at 1:11