Won't start the desktop on Pi3B+

[neil969]

Describe the bug I have burnt V3.3 32 bit on an SD card a few time ( using Balena & the Pi Imager) but it fails on first boot

To Reproduce Steps to reproduce the behavior: 1 Burn SD 2 stick it in ( attached to an HDMI Monitor 3 power it up 4 See it error :)

Expected behavior Boot to a desktop

Screenshots Can't sorry But it shows the pi boot screen and then goes black then [Failed} Failed to start Remount Root & Kernal File Systems [Failed} Failed to start SuxLink remote tranceiver repeater control software [Failed} Failed to startSuxLink repeater control software [Failed} Failed to start MariaDB 10.5.15 databse server

The the usual terminal start blurb up to Use raspi-config to set the country before use. Then a prompt.

System Info (please complete the following information):

• OS: HamPi
• HamPi or HamPC Version 3.3
• For HamPi, pi3B+

Additional context Add any other context about the problem here.

[ka3yan]

I'm having a similar issue with a RPi 4b.

[FAILED] Failed to start Remount Root and Kernel File Systems. [FAILED] Failed to start Check for Raspberry Pi EEPROM updates. [FAILED] Failed to start MariaDB 10.5.15 database server. [FAILED] Failed to start SvxLink remote transceiver repeater control software. [FAILED] Failed to start SvxLink repeater control software.

Same as above.

I did reformat the SD card between each imaging attempt.

[dslotter]

I'm investigating these reports.

[N1MCJ]

I am having the same issues.

[msamis1]

I have the same issue with exactly the same errors with a RPi 4B. I tried to update in command line but wifi is "blocked by rfkill" I then went down to ver. 3.01 and it loaded up with no problems.

[IZ5RZR]

Hi. Same problem on my PI3, reflashes more time but no WORK. Where can we download previus versions?

[msamis1]

https://sourceforge.net/projects/hampi/files/ I used 2022-09 Release

[IZ5RZR]

Grazie!

Ciao Da "msamis1" @. A "dslotter/HamPi" @. Cc "Max" @.,"Comment" @. Data Sat, 15 Apr 2023 12:30:04 -0700 Oggetto Re: [dslotter/HamPi] Won't start the desktop on Pi3B+ (Issue #220)

https://sourceforge.net/projects/hampi/files/ I used 2022-09 Release

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented. Message ID: @.***>

[Granmo]

Same issue I have done numerous burns to the same result

Thanks for any help you can give

Regards

Steve

[msamis1]

Have you tried running raspi-config to set up the location? Have you tried to go down to a lower version? Are you using a RPi 4B? I had to do that with an RPi 4B with 4gb. If you have a lower version or less memory, you may need to keep going down to older versions until it works.

[IZ5RZR]

Hi guys We can solve iussue only flashig previous version. IT WORKS!

[Granmo]

I have a raspberry pi 4 b with 2 gig. I can use an older version but it will not run wsjtx, so not for me. I will wait until they figure a fix.

Thanks for reply

Regards,

Steve

   Stephen  Granmo
    Principal Broker
        Licensed in OR & WA

C: 503.789.8341 F: 503.200.1096 www.nwservicerealty.com http://www.nwservicerealty.com/

  NW ★
  Service Realty, LLC

On Apr 21, 2023, at 9:55 AM, Max @.***> wrote:

Hi guys We can solve iussue only flashig previous version. IT WORKS!

— Reply to this email directly, view it on GitHub https://github.com/dslotter/HamPi/issues/220#issuecomment-1518098803, or unsubscribe https://github.com/notifications/unsubscribe-auth/A44GLSANUIJIST2JQNFNYZLXCK3ZHANCNFSM6AAAAAAWSYH6YY. You are receiving this because you are subscribed to this thread.

[filipjonckers]

Issue confirmed here - RPI 3B+ with brand new 64GB high quality SD card Did not start in graphical mode and after first boot refuses to enable WiFi - giving the dreaded: Wi-Fi is currently blocked by rfkill error Maybe best to remove the image from Sourceforge until fixed. v3.2 is working fine

Linked to #224