search

dslotter / HamPi

HamPi
GNU General Public License v3.0
525 stars 60 forks source link

IOWA Programs Failed to Start #76

Open Ken-K1KDA opened 3 years ago

Ken-K1KDA commented 3 years ago

Ran a simple start or no-start test of all the applications listed in the main menu under Hamradio. The following applications failed to start without any indication as to why. No error codes just no response.

Test system configuration: Windows 10 Home (x64) 2.10 gigahertz AMD A6-3600 APU with Radeon HD Graphics Multi-core (4 total) 8178 Megabytes Usable Installed Memory Sony 500GB SATA SSD NVIDIA GeForce GT 610 Display adapter

dslotter commented 3 years ago

I ran this same test on my Intel NUC:

Started up successfully

FLRig/FLDigi and associated programs CubicSDR - Used SDRPlay RSP2 and it ran as expected Gqrx Quisk SDRAngel FreeDV TwClock

Failed to start

NE2C D-Rats D-Rats repeater HamClock

D-Rats is almost definitely missing a Python 2 module. I had difficulties with this when building the image. I will try my hardest to get this working, because many folks use D-Rats for EMComm. NE2C brought up a dialog for 1/10 second and then disappeared before I could read it, and HamClock didn't display anything at all. I will look into all these.

dslotter commented 3 years ago

HamClock is a good find -- this is happening because passwordless sudo isn't working. I'll correct this.

dslotter commented 3 years ago

NEC2C is a really good find -- this is a command-line tool shoehorned into a GUI menu and hasn't worked since it was put into HamPi. I'll prioritize to fix this after D-Rats.

dslotter commented 3 years ago

D-Rats has had its missing libraries added for Xubuntu.

Ken-K1KDA commented 3 years ago

Dave,

I have been "under the weather" for a couple of days. I hope to get back on track in a few more days. I apologize for not completing more IOWA testing. I will get back to it as soon as I can.

Ken K1KDA

On Fri, Dec 25, 2020 at 8:15 PM Dave Slotter notifications@github.com wrote:

NEC2C is a really good find -- this is a command-line tool shoehorned into a GUI menu and hasn't worked since it was put into HamPi. I'll prioritize to fix this after D-Rats.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/dslotter/HamPi/issues/76#issuecomment-751306430, or unsubscribe https://github.com/notifications/unsubscribe-auth/ASIL54SEL7CWJHLYMADNUFDSWU2J5ANCNFSM4VJIVARQ .