new radiator thermostats not work

dubocr / homebridge-tahoma

Homebridge plugin for TaHoma, Connexoon, Cozytouch, Energeasy Connect.

Apache License 2.0

131 stars 42 forks source link

new radiator thermostats not work #134

Closed Auraya83 closed 3 years ago

Auraya83 commented 4 years ago

Good Morning. Somfy has been offering the new radiator thermostats since Monday. These are already displayed in IO broker, but you can not control them there yet. It would be great if you could activate the different modes in the radiator thermostats.

iobrokerthermostat

dubocr commented 4 years ago

Hi,

can you please log here to get your config : https://dev.duboc.pro/tools/setup

Auraya83 commented 4 years ago

I have already uploaded them

dubocr commented 4 years ago

Thank you, Is that concerning your 6 : Thermostat Büro Thermostat WZ Thermostat Bad Thermostat Küche Thermostat Sz Thermostat Ez ? I'll look at it to map good commands. Is the "states" already good ? Displayed temperatures Also, can you exit derogation mode on one thermostat (via TaHoma) then relog to https://dev.duboc.pro/tools/setup.

Thanks

Auraya83 commented 4 years ago

Yes it concerns the 6 mentioned thermostats. All Stats are good. The actually Temperature are shown in an extra Temperature Sensor . I have now given everyone a different status. As soon as the temperature on the thermostat is changed manually, it jumps into manual mode, I once tried to assign the Api. if you still need something, let me know. I hope it helps.

All 5 commands: setDerogation comfort,further_notice setDerogation eco,further_notice setDerogation frostprotection,further_notice for manual setDerogation 18.5,further_notice setDerogation away,further_notice

thermostat2

dubocr commented 4 years ago

Hi, I've push first run to implements your heaters. This will merge T° sensor into Thermostat and allow you to send commands. But there are missing point :

Are you able to put the system in "auto"/"program" mode ? Can you do it and log again to the page as I can't find command for that. Can you update the plugin and give me first feedback.

Thanks.

Auraya83 commented 4 years ago

Hi, wow very fast. Thank you. 1st test is working. I see the temperature in dhe Thermostat and when i Change it it will be send to the thermostat. I have Set The Thermostat Büro & Küche in Programming mode. The Programming mode is the intern Kalender from the Thermostat. My Wish is that i can set it to the different Modes. When you need Anything write it to me ;)

Big Thanks for yor Support.

dubocr commented 4 years ago

Hi, I've made a smal correction as the "auto" mode were not as I expected. With the last release you will be able to :

Set Thermostat in "auto" (auto mode in Homekit)
Derogate to force comfort (heating mode in Homekit)
Derogate to force eco (cooling mode in Homekit)
Set to "away" mode (off mode in Homekit) => Not sure it will work as expected, you may try it and put your Thermostat in OFF mode via TaHoma then log to the page to let me see what is the good command
Derogate to force T° (change T° in Homekit)

Let me know if something doesn't work as expected.

Have a nice day.

Auraya83 commented 4 years ago

Wow thanks. What i have testet: Settings to an custom temperature Works. Setting to Mode away, comfort, eco works. Switch to Programming mode after derogate works. all my wishes are fulfilled. I have already send my config

dubocr commented 3 years ago

Thank you for using Homebridge TaHoma plugin.

Please follow these step to obtain better support :

Execute failling operations from official app (TaHoma/Cozytouch/etc.) then execute same operation from Homekit
Report your config by browsing https://dev.duboc.pro/tahoma
Search issues with title corresponding to your device widget name (see picture below). If no opened issue, rename your issue with this widget name.
Provide your bridge last 4 digits (number visible as SETUP-XXXX-XXXX-XXXX at step 2.)

Thank you.