Error 400 Unknown object. (UNSPECIFIED_ERROR)

[ronald5555]

receiving this error every 30 minutes ? how to correct ?

[adavison007]

me too

[madmax]

me to :(

[CBHomekitCrazy]

Getting another versions of error 400: Everything has been working lie a charm for months. Haven't changed config. Running on HOOBS Have configured movement duration which still works fine for my awning , but stopped working for my screens. 100% up or down still works, but for intermediate positions I am suddenly getting this error. (logging has btw started writing text 3 times.. ?) The long shows a 100% open, which works fine and then trying to open something in between which fails: 11.9.2023 12.55.35Tahoma BridgeTaHoma[Soveværelse top vindue] open[] 11.9.2023 12.55.35Tahoma BridgeTaHoma[Soveværelse top vindue] open[] 11.9.2023 12.55.35Tahoma BridgeTaHoma[Soveværelse top vindue] open[] 11.9.2023 12.55.41Tahoma BridgeTaHoma[Soveværelse top vindue] open COMPLETED 11.9.2023 12.55.41Tahoma BridgeTaHoma[Soveværelse top vindue] open COMPLETED 11.9.2023 12.55.41Tahoma BridgeTaHoma[Soveværelse top vindue] open COMPLETED 11.9.2023 12.55.45Tahoma BridgeTaHoma[Soveværelse top vindue] my[] 11.9.2023 12.55.45Tahoma BridgeTaHoma[Soveværelse top vindue] my[] 11.9.2023 12.55.45Tahoma BridgeTaHoma[Soveværelse top vindue] my[] 11.9.2023 12.55.45Tahoma BridgeTaHomaERROR[Soveværelse top vindue] my Error 400 No such command : my on device ogp://2104-7416-0278/13454973 (ogp:Blind) (UNSUPPORTED_OPERATION) 11.9.2023 12.55.45Tahoma BridgeTaHomaERROR[Soveværelse top vindue] my Error 400 No such command : my on device ogp://2104-7416-0278/13454973 (ogp:Blind) (UNSUPPORTED_OPERATION) 11.9.2023 12.55.45Tahoma BridgeTaHomaERROR[Soveværelse top vindue] my Error 400 No such command : my on device ogp://2104-7416-0278/13454973 (ogp:Blind) (UNSUPPORTED_OPERATION)

As said it has been working just fine, and I am indeed happy camper so far. All the best and great efforts in making this plugin. Thx!

UPDATE: tested in Homebridge server running on macOS. Her it works. Same Plugin, same json config. 9/11/2023, 4:25:41 PM] [TaHoma] [Soveværelse top vindue] open[] [9/11/2023, 4:25:46 PM] [TaHoma] [Soveværelse top vindue] Will stop movement in 3920 millisec [9/11/2023, 4:25:46 PM] [TaHoma] [Soveværelse top vindue] open COMPLETED

Not being an expert here, but difference is obvious. On HOOBS installation it initiates the my[] command where as in the homebridge on macOS it runs open[] command, which is also the same command it uses for my awning on on HOOBS which works well compared to the screens.

[sabiwa]

I have the same error with a local connection

[Stuard40]

Perform little investigation about this.

Seems TaHoma Local not support POST on /setup/devices/states/refresh Remote API support it but i dont know what enpoint do. Seems litlebit useless.

In Plugin documentation is "Period (in minutes) for refreshing device changes made locally (with remote control for eg.)" but enpoint return empty json even if device changes done.

Functionlity can be disabled by set Advanced Settings > Refresh period to 0

[sabiwa]

I have changed the refresh period to 0 but still every 30 mins I am getting the 400 error

"refreshPeriod": 0,

[nexttoyou]

Can confirm that "refreshPeriod": 0, doesn’t change anything.

[sddgit]

Just a "me too". I have all devices excluded except one light. Interesting that the GUI doesn't let you specifiy a refresh period of 0. It says it must be 10 or more.

[Tontonpat]

@dubocr : peux-tu voir pour retirer cette erreur des logs stp? Merci

[Tontonpat]

@dubocr up stp