search

ducharmemetal / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega
0 stars 0 forks source link

RC2_REV is not reversing servos #931

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
I am running a ruddervator airplane and I need to reverse the direction of 
channel 2 and 4. When I set RC2_REV and RC4_REV to -1 and write params, the 
direction of the servos do not change.

Original issue reported on code.google.com by scott.as...@gmail.com on 15 Jul 2013 at 12:30

GoogleCodeExporter commented 9 years ago 
Experiencing exactly the same - setting RC2_REV (to -1) and elevator still move 
in the opposite direction to what I want. Read another thread on this and it 
did not end up with a resolution. Until otherwise stated, I will let all servo 
reverse settings on my DX8 be set to Normal. Mission planner and Ardupilot 
firmware updated to the level as the time of writing.

Regards
  Tore

Original comment by tore.eri...@gmail.com on 12 Aug 2013 at 3:20

GoogleCodeExporter commented 9 years ago 
I havent checked the code but it would appear the RC?_REV params are ignored.

Original comment by miroslav...@gmail.com on 8 Sep 2013 at 10:34