duxingkei33 orangepi_PC_gpio_pyH3 issues - Githubissues

duxingkei33 / orangepi_PC_gpio_pyH3

python control orangepi_PC ext GPIO ALLwinner H3 base on pyA20 0.2.1

234 stars 130 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Voltage on pin in INPUT mode?

#18 AdvancedStyle opened 4 years ago
0
STATUS_LED is connected to a wrong pi number

#17 antonio-fernandez opened 4 years ago
1
No physical output of GPIO pins. Code works fine, LED is just not lighting or blinking

#16 ElLobo007 closed 5 years ago
0
修改i2c传输大小限制

#15 cxz119 opened 5 years ago
2
Files were created to control the RGB Led

#14 muminkoykiran opened 6 years ago
1
Create rgbControlTest.py

#13 muminkoykiran closed 6 years ago
0
Create rgbControlClass.py

#12 muminkoykiran closed 6 years ago
0
Conflict with I2C extension during installation

#11 mtanwr opened 7 years ago
0
Update spi.c

#10 zhjy15 opened 7 years ago
0
Interrupts python RPI GPIOstyle

#9 maco1717 opened 7 years ago
3
SPI for mcp23s17 on Orange Pi

#8 joaopedro2794 opened 7 years ago
0
port.PA15 & port.PA16

#7 nopnop2002 opened 7 years ago
4
python.h missing

#6 AST-esp-rasp opened 7 years ago
5
how can i control the speed (PWM) in orangepi zero

#5 DaniyalGeek opened 7 years ago
1
Default SPI speed is much too slow

#4 martinayotte opened 8 years ago
1
POWER_LED not blink

#3 nopnop2002 opened 8 years ago
3
/orangepi_PC_gpio_pyH3/pyA20/gpio/mapping.h

#2 nopnop2002 opened 8 years ago
1
Thank you to share your code.

#1 feilongfl closed 7 years ago
2