search

dxoverdy / Alpha2MQTT

A smart home interface for AlphaESS solar and battery inverters.
GNU General Public License v3.0
41 stars 6 forks source link

Data freezing #17

Closed Spookster closed 9 months ago

Spookster commented 9 months ago

I dont believe this is a software issue, but has anyone experienced a freezing of data output recently? As below, the unit stops sending data. image

Its happened multiple times over the last week, after running reliably for months. I thought it may have been hardware, however swapping to a complete new unit has the same issue. Network cable to unit replaced, same issue.

It makes me wonder if theres perhaps been a software update or fault at the ESS end.

Next step is to try and run #debug to see if anything shows up there

DannyBoy-PI commented 9 months ago

Hi Dan,

No, I haven't seen that issue. Only issue I currently have is the registers for minutes (charging) don't seem to be right (for Smile B3 anyway). I have logged a ticket with Alpha to see if they can throw any light on it.

Regards,

Dan.

Sent from Outlook for Androidhttps://aka.ms/AAb9ysg

From: Spookster @.> Sent: Wednesday, September 27, 2023 8:29:31 pm To: dxoverdy/Alpha2MQTT @.> Cc: Subscribed @.***> Subject: [dxoverdy/Alpha2MQTT] Data freezing (Issue #17)

I dont believe this is a software issue, but has anyone experienced a freezing of data output recently? As below, the unit stops sending data. [image]https://user-images.githubusercontent.com/982535/271092323-954e3b96-b68b-4a81-badc-4bbdf91bf056.png

Its happened multiple times over the last week, after running reliably for months. I thought it may have been hardware, however swapping to a complete new unit has the same issue. Network cable to unit replaced, same issue.

It makes me wonder if theres perhaps been a software update or fault at the ESS end.

Next step is to try and run #debug to see if anything shows up there

— Reply to this email directly, view it on GitHubhttps://github.com/dxoverdy/Alpha2MQTT/issues/17, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ATYZTMOW3KMBWLYOAHLKP43X4R5BPANCNFSM6AAAAAA5J3KJMQ. You are receiving this because you are subscribed to this thread.Message ID: @.***>

Spookster commented 9 months ago

So far, resetting the main ESS unit appears to have fixed the problem

Possibly to do with recent ESS updates (closed)

rodgers86 commented 2 months ago

Hi have you had any further issues like this?

In the last week this has happened 3 times.

Rebooting Node-Red in Proxmox seems to instantly fix it. But I’ve still not worked out why it’s happening's.