search

dzungpv / dnckatsw00x

Zigbee light switch with dim support base on chip cc2530
GNU General Public License v3.0
90 stars 19 forks source link

How to join the zigbee network? #7

Closed nobodyman1 closed 5 years ago

nobodyman1 commented 5 years ago

Could you please explain how to join the zigbee network? If there is a button required please mention the corresponding digital input of the CC2530. Thank you!

shahglobal commented 5 years ago

I have the same question. Thanks

shahglobal commented 5 years ago

Sniffer showed showed beacons on 2425Mhz, while zigbee2mqtt was on 2405,, how can I change its channel to Match zigbee2mqtt dongle? Thanks

olili commented 5 years ago

same problem/question. Any hint?

VertorixAU commented 5 years ago

I'm also wondering how to add this to the zigbee network? It is odd that it would only work on a single channel, and the default one is different to the zigbee2MQTT default for the CC2531. Shouldn't it be able to be added to any channel?

Anyone had success with this firmware?

dzungpv commented 5 years ago

I use channel 15 for the firmware, just change in zigbee2mqtt settings, To change the channel to all edit file: C:\Texas Instruments\Z-Stack Home 1.2.2a.44539\Projects\zstack\Tools\CC2530DB\f8wConfig.cfg Example below use all vavilable channel:

-DDEFAULT_CHANLIST=DMAX_CHANNELS_24GHZ