Closed brunohorta82 closed 1 year ago
Hi, I wrote article in doc/BOARD_CONFIG.md about that https://github.com/dzurikmiroslav/esp32-evse/blob/master/doc/BOARD_CONFIG.md#pilot_down_treshold_x-calculation
The previous article was incorrect, the EV resistance was not accounted for in the formula I used... In the wiki, I described the procedure based on the simulation of the EV side: https://github.com/dzurikmiroslav/esp32-evse/wiki/CP-calibration
Hello, you can explain the way how I can get PILOT_DOWN_TRESHOLD_X from a new board? Thanks