LSI / AVAGO 3108 MegaRAID

Two small details with this MegaRAID SAS board

Have the strange behaviour of unplugging and pluging back a disk from an array doesn't make the controller rebuild the array with that disk. (Force rebuild instructions works ok 👍 )
To get smartmontools / smartctl working on the drives , I only need "/dev/sda -d megaraid,X", not "/dev/sda -d sat+megaraid,X"

More info about the RAID controller :

lspci :

RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02)

megacli :

Adapter #0
===============================================================
               Versions
================
Product Name    : AVAGO 3108 MegaRAID
Serial No       :
FW Package Build: 24.15.0-0018
                Mfg. Data
            ================
Mfg. Date       : 00/00/00
Rework Date     : 00/00/00
Revision No     :
Battery FRU     : N/A

            Image Versions in Flash:
            ================
BIOS Version       : 6.31.03.0_4.17.08.00_0x06140200
Ctrl-R Version     : 5.16-0300
Preboot CLI Version: 01.07-05:#%0000
FW Version         : 4.650.00-6223
NVDATA Version     : 3.1602.00-0003
Boot Block Version : 3.07.00.00-0003

            Pending Images in Flash
            ================
None

            PCI Info
            ================
Controller Id   : 0000
Vendor Id       : 1000
Device Id       : 005d
SubVendorId     : 15d9
SubDeviceId     : 0809

Host Interface  : PCIE

ChipRevision    : C0

Link Speed           : 0
Number of Frontend Port: 0
Device Interface  : PCIE
....
            Capabilities
            ================
RAID Level Supported             : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
Supported Drives                 : SAS, SATA

eLvErDe / hwraid

LSI / AVAGO 3108 MegaRAID #59