Add more timers - Githubissues

Which board (stock / gruvin9x / sky9x / Taranis) are you using?

Taranis

What is your openTx FW version?

latest

What is your openTx EEPROM version?

latest

What steps will reproduce the problem?

What is the expected output? What do you see instead?

Two timers are not enough. I have these ideas for additional timers:

When pressing "menu" and a list of the models appears, there is plenty of space 
right to the bytes coloumn. Here, two additional timers could be.
1) Overall model timer
This timer counts the overall time a model is chosen. This way one knows the 
total use time a model has accumulated, this could be a valuable info for the 
service interval of engines or electric motor gears or bearings.

2) Daily model timer
This timer could be used to count the total time a model was used on one day, 
so that one knows when to recharge the RX battery on a glider, for example.

Both these timers one should be able to edit and to reset. Timer 1) must only 
be reset after a warning and a confirmation. Perhaps an additional menu line 
for the timers when pressing "ENT" long in this page...

3) Radio runtime timer
This timer could be displayed next to the TX battery voltage number on the top 
and the left of the screen. It counts the total time the TX is on, so one knows 
when to recharge.
Reset is done by pressing "ENT", and an additional menu "Reset TX Timer".

Please provide any additional information below.
Original issue reported on code.google.com by extremf...@gmx.de on 16 Oct 2013 at 6:59
easthun4 / opentx

Add more timers #163
