Closed joehellmers closed 3 years ago
1tnguyen
commented
3 years ago @joehellmers Do you have more information about the system configurations, e.g. full Dockerfile?
I'm using Ubuntu 20.04.1 with gcc version 9.3.0 (Ubuntu 9.3.0-17ubuntu1~20.04) and cannot reproduce that error.
joehellmers
commented
3 years ago @tnguyen-ornl , this is a VirtualBox VM with the latest version of 20.04.1 including doing an "sudo apt-get dist-upgrade". There isn't anything special about the system. I created it from scratch and was installing XACC based on the installation instructions in the ReadTheDocs website. Now I'm getting the same issue on 18.04.1 as well.
1tnguyen
commented
3 years ago joehellmers
commented
3 years ago Some of the options are disabled leads me to believe this might be the issue.
-mfma [disabled]
-mf16c [disabled]
-mbmi [disabled]I upgraded VirtualBox, so maybe that's what induced the error in Ubuntu 18 and 20.
Complete output follows.
The following options are target specific:
-m128bit-long-double [enabled]
-m16 [disabled]
-m32 [disabled]
-m3dnow [disabled]
-m3dnowa [disabled]
-m64 [enabled]
-m80387 [enabled]
-m8bit-idiv [disabled]
-m96bit-long-double [disabled]
-mabi= sysv
-mabm [enabled]
-maccumulate-outgoing-args [disabled]
-maddress-mode= long
-madx [disabled]
-maes [enabled]
-malign-data= compat
-malign-double [disabled]
-malign-functions= 0
-malign-jumps= 0
-malign-loops= 0
-malign-stringops [enabled]
-mandroid [disabled]
-march= haswell
-masm= att
-mavx [enabled]
-mavx2 [enabled]
-mavx256-split-unaligned-load [disabled]
-mavx256-split-unaligned-store [disabled]
-mavx5124fmaps [disabled]
-mavx5124vnniw [disabled]
-mavx512bitalg [disabled]
-mavx512bw [disabled]
-mavx512cd [disabled]
-mavx512dq [disabled]
-mavx512er [disabled]
-mavx512f [disabled]
-mavx512ifma [disabled]
-mavx512pf [disabled]
-mavx512vbmi [disabled]
-mavx512vbmi2 [disabled]
-mavx512vl [disabled]
-mavx512vnni [disabled]
-mavx512vpopcntdq [disabled]
-mbionic [disabled]
-mbmi [disabled]
-mbmi2 [disabled]
-mbranch-cost=<0,5> 3
-mcall-ms2sysv-xlogues [disabled]
-mcet-switch [disabled]
-mcld [disabled]
-mcldemote [disabled]
-mclflushopt [disabled]
-mclwb [disabled]
-mclzero [disabled]
-mcmodel= [default]
-mcpu=
-mcrc32 [disabled]
-mcx16 [enabled]
-mdispatch-scheduler [disabled]
-mdump-tune-features [disabled]
-mf16c [disabled]
-mfancy-math-387 [enabled]
-mfentry [disabled]
-mfentry-name=
-mfentry-section=
-mfma [disabled]
-mfma4 [disabled]
-mforce-drap [disabled]
-mforce-indirect-call [disabled]
-mfp-ret-in-387 [enabled]
-mfpmath= sse
-mfsgsbase [enabled]
-mfunction-return= keep
-mfused-madd
-mfxsr [enabled]
-mgeneral-regs-only [disabled]
-mgfni [disabled]
-mglibc [enabled]
-mhard-float [enabled]
-mhle [enabled]
-miamcu [disabled]
-mieee-fp [enabled]
-mincoming-stack-boundary= 0
-mindirect-branch-register [disabled]
-mindirect-branch= keep
-minline-all-stringops [disabled]
-minline-stringops-dynamically [disabled]
-minstrument-return= none
-mintel-syntax
-mlarge-data-threshold=<number> 65536
-mlong-double-128 [disabled]
-mlong-double-64 [disabled]
-mlong-double-80 [enabled]
-mlwp [disabled]
-mlzcnt [enabled]
-mmanual-endbr [disabled]
-mmemcpy-strategy=
-mmemset-strategy=
-mmitigate-rop [disabled]
-mmmx [enabled]
-mmovbe [enabled]
-mmovdir64b [disabled]
-mmovdiri [disabled]
-mmpx [disabled]
-mms-bitfields [disabled]
-mmusl [disabled]
-mmwaitx [disabled]
-mno-align-stringops [disabled]
-mno-default [disabled]
-mno-fancy-math-387 [disabled]
-mno-push-args [disabled]
-mno-red-zone [disabled]
-mno-sse4 [disabled]
-mnop-mcount [disabled]
-momit-leaf-frame-pointer [disabled]
-mpc32 [disabled]
-mpc64 [disabled]
-mpc80 [disabled]
-mpclmul [enabled]
-mpcommit [disabled]
-mpconfig [disabled]
-mpku [disabled]
-mpopcnt [enabled]
-mprefer-avx128
-mprefer-vector-width= none
-mpreferred-stack-boundary= 0
-mprefetchwt1 [disabled]
-mprfchw [disabled]
-mptwrite [disabled]
-mpush-args [enabled]
-mrdpid [disabled]
-mrdrnd [enabled]
-mrdseed [disabled]
-mrecip [disabled]
-mrecip=
-mrecord-mcount [disabled]
-mrecord-return [disabled]
-mred-zone [enabled]
-mregparm= 6
-mrtd [disabled]
-mrtm [disabled]
-msahf [enabled]
-msgx [disabled]
-msha [disabled]
-mshstk [disabled]
-mskip-rax-setup [disabled]
-msoft-float [disabled]
-msse [enabled]
-msse2 [enabled]
-msse2avx [disabled]
-msse3 [enabled]
-msse4 [enabled]
-msse4.1 [enabled]
-msse4.2 [enabled]
-msse4a [disabled]
-msse5
-msseregparm [disabled]
-mssse3 [enabled]
-mstack-arg-probe [disabled]
-mstack-protector-guard-offset=
-mstack-protector-guard-reg=
-mstack-protector-guard-symbol=
-mstack-protector-guard= tls
-mstackrealign [disabled]
-mstringop-strategy= [default]
-mstv [enabled]
-mtbm [disabled]
-mtls-dialect= gnu
-mtls-direct-seg-refs [enabled]
-mtune-ctrl=
-mtune= haswell
-muclibc [disabled]
-mvaes [disabled]
-mveclibabi= [default]
-mvect8-ret-in-mem [disabled]
-mvpclmulqdq [disabled]
-mvzeroupper [enabled]
-mwaitpkg [disabled]
-mwbnoinvd [disabled]
-mx32 [disabled]
-mxop [disabled]
-mxsave [enabled]
-mxsavec [disabled]
-mxsaveopt [disabled]
-mxsaves [disabled]
Known assembler dialects (for use with the -masm= option):
att intel
Known ABIs (for use with the -mabi= option):
ms sysv
Known code models (for use with the -mcmodel= option):
32 kernel large medium small
Valid arguments to -mfpmath=:
387 387+sse 387,sse both sse sse+387 sse,387
Known indirect branch choices (for use with the -mindirect-branch=/-mfunction-return= options):
keep thunk thunk-extern thunk-inline
Known choices for return instrumentation with -minstrument-return=:
call none nop5
Known data alignment choices (for use with the -malign-data= option):
abi cacheline compat
Known vectorization library ABIs (for use with the -mveclibabi= option):
acml svml
Known address mode (for use with the -maddress-mode= option):
long short
Known preferred register vector length (to use with the -mprefer-vector-width= option):
128 256 512 none
Known stack protector guard (for use with the -mstack-protector-guard= option):
global tls
Valid arguments to -mstringop-strategy=:
byte_loop libcall loop rep_4byte rep_8byte rep_byte unrolled_loop vector_loop
Known TLS dialects (for use with the -mtls-dialect= option):
gnu gnu2
Known valid arguments for -march= option:
i386 i486 i586 pentium lakemont pentium-mmx winchip-c6 winchip2 c3 samuel-2 c3-2 nehemiah c7 esther i686 pentiumpro pentium2 pentium3 pentium3m pentium-m pentium4 pentium4m prescott nocona core2 nehalem corei7 westmere sandybridge corei7-avx ivybridge core-avx-i haswell core-avx2 broadwell skylake skylake-avx512 cannonlake icelake-client icelake-server cascadelake bonnell atom silvermont slm goldmont goldmont-plus tremont knl knm intel geode k6 k6-2 k6-3 athlon athlon-tbird athlon-4 athlon-xp athlon-mp x86-64 eden-x2 nano nano-1000 nano-2000 nano-3000 nano-x2 eden-x4 nano-x4 k8 k8-sse3 opteron opteron-sse3 athlon64 athlon64-sse3 athlon-fx amdfam10 barcelona bdver1 bdver2 bdver3 bdver4 znver1 znver2 btver1 btver2 generic native
Known valid arguments for -mtune= option:
generic i386 i486 pentium lakemont pentiumpro pentium4 nocona core2 nehalem sandybridge haswell bonnell silvermont goldmont goldmont-plus tremont knl knm skylake skylake-avx512 cannonlake icelake-client icelake-server cascadelake intel geode k6 athlon k8 amdfam10 bdver1 bdver2 bdver3 bdver4 btver1 btver2 znver1 znver2
I built and test the tnguyen/fix-virtual-box-qsim-build branch and it seems to have worked fine, including all tests passing.
Will you be merging this with master at eclipse/xacc, or is it something I would just need to do whenever I'm doing work on VirtualBox?
1tnguyen
commented
3 years ago Thanks @joehellmers for checking the fix. Yea, I've submitted a PR to get it merged.
I just set up a new VM. with Ubuntu 20.4. When building I get a message related to inlining. I'm going to switch to Ubuntu 18, like I was using before which worked fine, but I thought you might want to know about it.