search

ecros / procfw

Automatically exported from code.google.com/p/procfw
0 stars 0 forks source link

PSP 1001 PHAT (IC1003) 6.60 PRO C2 has messed up buttons ingame (on mem stick), UMD's work fine. #564

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Install CFW on PSP 1001
2. Boot up installed game from mem stick
3. Test out the buttons

What is the expected output? What do you see instead?
It should work, but for me the buttons do not work. It is not a hardware issue 
because UMD's work fine with no control issues.

What version of the product are you using? On what operating system?
PSP 1001 PHAT (IC1003) 6.60 PRO C2

Please provide any additional information below.

I tried re installing and flashing to no avail . I also tried older software 
but still, the in-game keys do not work. I can however exit the game by 
selecting the home button, there, the keys are fine. But all input is jammed 
in-game. In the PSP home menu I cannot access the recovery menu via the select 
button, I also cannot use the "hold R while booting" trick either. I have 
tested this on 2 CFW enabled games and in both I cannot use my buttons. For 
diagnostic purposes I tried the "key cleaner" and "P-tester" tools (their 
controls seemed to work fine "in-game") and found that all keys were 
functional. And of-course I did the usual formats and removed the battery for 
24 hours and also resetting all settings to default. It was suggested via 
online forums that I access the recovery menu (but I can't) and disable the VSH 
menu. And no, the psp was not on "hold" the whole time. I am baffled. I am 
tired. Please help.

Original issue reported on code.google.com by wahidsha...@gmail.com on 26 May 2013 at 2:21

GoogleCodeExporter commented 9 years ago 
Oh and I just checked OFW and CFW browser controls, every single control is 
fine. So according to "key cleaner" and my hardware tests, everything is 100 
percent working. So we can rule that out.

Original comment by wahidsha...@gmail.com on 26 May 2013 at 2:31

GoogleCodeExporter commented 9 years ago 
Start from disabling all plugins or deleting the seplugins folder.

Original comment by piotrekhenry on 28 May 2013 at 6:13

GoogleCodeExporter commented 9 years ago 
Solved. Turns out it was the ISO itself.

Original comment by wahidsha...@gmail.com on 5 Jun 2013 at 11:01

GoogleCodeExporter commented 9 years ago 
"Solved. Turns out it was the ISO itself."

Original comment by devnonam...@gmail.com on 25 Aug 2013 at 2:16