Open LokiSharp opened 1 month ago
DDR 9fffbe1e78 cym 24/02/04-10:09:20,fwver: v1.16
LPDDR5, 2400MHz
channel[0] BW=16 Col=10 Bk=16 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=8192MB
channel[1] BW=16 Col=10 Bk=16 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=8192MB
channel[2] BW=16 Col=10 Bk=16 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=8192MB
channel[3] BW=16 Col=10 Bk=16 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=8192MB
Manufacturer ID:0xff
CH0 RX Vref:25.8%, TX Vref:23.0%,23.0%
CH1 RX Vref:26.7%, TX Vref:22.0%,22.0%
CH2 RX Vref:27.5%, TX Vref:21.0%,21.0%
CH3 RX Vref:29.3%, TX Vref:20.0%,19.0%
change to F1: 534MHz
change to F2: 1320MHz
change to F3: 1968MHz
change to F0: 2400MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09)
unknown raw ID 0 0 0
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
No misc partition
Trying fit image at 0x800 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(28f25a5e72...) + OK
## Checking uboot 0x00200000 ... sha256(3a0c901519...) + OK
## Checking fdt 0x00700000 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(e3b0c44298...) + OK
## Checking atf-3 0xff100000 ... sha256(5e1b3ae0ba...) + OK
## Checking optee 0x08400000 ... sha256(4b2d406bfc...) + OK
## Checking nvdata 0x007c0000 ... OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 154.44 ms
NOTICE: BL31: v2.11.0(debug):582318a
NOTICE: BL31: Built : 15:39:16, Oct 6 2024
INFO: GICv3 without legacy support detected.
INFO: ARM GICv3 driver initialized in EL3
INFO: Maximum SPI INTID supported: 511
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a55: CPU workaround for erratum 1530923 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
ArmPlatformInitialize: Setting baud rate to 1500000
UEFI firmware (version fa1b462 built at 15:41:08 on Oct 6 2024)
MmrPiSdramGetMemorySize(): Bank #0: 2 channel(s), type 0x1, version 0x3
SdramGetMemorySize(): Ch #0: 8192 MB
SdramGetMemorySize(): Ch #1: 8192 MB
SdramGetMemorySize(): Bank #1: 2 channel(s), type 0x1, version 0x3
SdramGetMemorySize(): Ch #2: 8192 MB
SdramGetMemorySize(): Ch #3: 8192 MB
SdramGetMemorySize(): Detected 32768 MB RAM
RAM: 0x00000000 (Size 0x800000000)
TF-A + Shared Memory:
PhysicalBase: 0x0
VirtualBase: 0x0
Length: 0x200000
UEFI FV:
PhysicalBase: 0x200000
VirtualBase: 0x200000
Length: 0x500000
Variable Store:
PhysicalBase: 0x7C0000
VirtualBase: 0x7C0000
Length: 0x30000
System RAM (< OP-TEE):
PhysicalBase: 0x7F0000
VirtualBase: 0x7F0000
Length: 0x7C10000
OP-TEE:
PhysicalBase: 0x8400000
VirtualBase: 0x8400000
Length: 0x1000000
System RAM (< 4GB):
PhysicalBase: 0x9400000
VirtualBase: 0x9400000
Length: 0xE6C00000
MMIO:
PhysicalBase: 0xF0000000
VirtualBase: 0xF0000000
Length: 0x10000000
System RAM >= 4GB:
PhysicalBase: 0x100000000
VirtualBase: 0x100000000
Length: 0x700000000
MMIO > 32GB:
PhysicalBase: 0x900000000
VirtualBase: 0x900000000
Length: 0x141400000
BAD1:
PhysicalBase: 0x3FC000000
VirtualBase: 0x3FC000000
Length: 0x500000
BAD2:
PhysicalBase: 0x3FFF00000
VirtualBase: 0x3FFF00000
Length: 0x100000
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x3E793000
Loading DxeCore at 0x003E792000 EntryPoint=0x003E79BB68
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0x3E793000
HOBLIST address in DXE = 0xEF621018
Memory Allocation 0x00000004 0x3FFE8000 - 0x3FFE8FFF
Memory Allocation 0x00000000 0x200000 - 0x6FFFFF
Memory Allocation 0x00000006 0x7C0000 - 0x7EFFFF
Memory Allocation 0x00000000 0x8400000 - 0x93FFFFF
Memory Allocation 0x00000000 0x3FC000000 - 0x3FC4FFFFF
Memory Allocation 0x00000000 0x3FFF00000 - 0x3FFFFFFFF
Memory Allocation 0x00000004 0x3FFE7000 - 0x3FFE7FFF
Memory Allocation 0x00000004 0x3FFE6000 - 0x3FFE6FFF
Memory Allocation 0x00000004 0x3FFE5000 - 0x3FFE5FFF
Memory Allocation 0x00000004 0x3FFE4000 - 0x3FFE4FFF
Memory Allocation 0x00000004 0x3FFE3000 - 0x3FFE3FFF
Memory Allocation 0x00000004 0x3FFE2000 - 0x3FFE2FFF
Memory Allocation 0x00000004 0x3FFE1000 - 0x3FFE1FFF
Memory Allocation 0x00000004 0x3FFE0000 - 0x3FFE0FFF
Memory Allocation 0x00000004 0x3FFDF000 - 0x3FFDFFFF
Memory Allocation 0x00000004 0x3FFDE000 - 0x3FFDEFFF
Memory Allocation 0x00000004 0x3FFE9000 - 0x3FFFFFFF
Memory Allocation 0x00000004 0x3FFCE000 - 0x3FFDDFFF
Memory Allocation 0x00000004 0x3F3D4000 - 0x3FFCDFFF
Memory Allocation 0x00000004 0x3E7DA000 - 0x3F3D3FFF
Memory Allocation 0x00000003 0x3E792000 - 0x3E7D9FFF
Memory Allocation 0x00000003 0x3E792000 - 0x3E7D9FFF
FV Hob 0x200000 - 0x6FFFFF
FV Hob 0x3E7DA000 - 0x3F3D213F
FV2 Hob 0x3E7DA000 - 0x3F3D213F
00000000-0000-0000-0000-000000000000 - 9E21FD93-9C72-4C15-8C4B-E77F1DB2D792
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/StatusLedDxe/StatusLedDxe/DEBUG/StatusLedDxe.dll 0xEFBFC000
Loading driver at 0x000EFBFB000 EntryPoint=0x000EFBFD334 StatusLedDxe.efi
GpioPinSetDirection Group:1 Pin:17 Direction:1
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/PCD/Dxe/Pcd/DEBUG/PcdDxe.dll 0xEFBF2000
Loading driver at 0x000EFBF1000 EntryPoint=0x000EFBF6100 PcdDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll 0xEFD50000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll
Loading driver at 0x000EFD40000 EntryPoint=0x000EFD51A30 RuntimeDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll 0xEFB2B000
Loading driver at 0x000EFB2A000 EntryPoint=0x000EFB2C198 SecurityStubDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter/DEBUG/EmbeddedMonotonicCounter.dll 0xEFD10000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter/DEBUG/EmbeddedMonotonicCounter.dll
Loading driver at 0x000EFD00000 EntryPoint=0x000EFD11154 EmbeddedMonotonicCounter.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe/DEBUG/ResetSystemRuntimeDxe.dll 0xEFCC0000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe/DEBUG/ResetSystemRuntimeDxe.dll
Loading driver at 0x000EFCB0000 EntryPoint=0x000EFCC1DC8 ResetSystemRuntimeDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll 0xEFB26000
Loading driver at 0x000EFB25000 EntryPoint=0x000EFB270E8 MetronomeDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll 0xEFB06000
Loading driver at 0x000EFB05000 EntryPoint=0x000EFB099BC HiiDatabase.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/RandomNumberGenerator/RngDxe/RngDxe/DEBUG/RngDxe.dll 0xEFAFF000
Loading driver at 0x000EFAFE000 EntryPoint=0x000EFB00A6C RngDxe.efi
FW-TRNG: UUID 583C5223-4874-8340-9D16-E3FAB9F173BC
FW-TRNG: Version 1.0, GUID {583C5223-4874-8340-9D16-E3FAB9F173BC}
RngLib uses an Unsafe algorithm and must not be used for production builds.
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/NorFlashDxe.dll 0xEFC70000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/NorFlashDxe.dll
Loading driver at 0x000EFC60000 EntryPoint=0x000EFC73AC4 NorFlashDxe.efi
SPI Nor ID: 0 0 0
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/RkFvbDxe/RkFvbDxe/DEBUG/RkFvbDxe.dll 0xEFC20000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/RkFvbDxe/RkFvbDxe/DEBUG/RkFvbDxe.dll
Loading driver at 0x000EFC10000 EntryPoint=0x000EFC24CBC RkFvbDxe.efi
RkFvbEntryPoint: BootDevice->DevType = 0x2
FvbConfigureFlashInstance: SPI flash not present.
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll 0xEA6F0000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll
Loading driver at 0x000EA6E0000 EntryPoint=0x000EA6F8FF8 VariableRuntimeDxe.efi
Variable driver common space: 0xFF9C 0xFF9C 0xFF9C
Variable driver will work with auth variable format!
VarCheckLibRegisterSetVariableCheckHandler - 0xEA6F29A4 Success
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/SerialDxe/SerialDxe/DEBUG/SerialDxe.dll 0xEFAFA000
Loading driver at 0x000EFAF9000 EntryPoint=0x000EFAFB400 SerialDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/ArmGic/ArmGicDxe/DEBUG/ArmGicDxe.dll 0xEFAF3000
Loading driver at 0x000EFAF2000 EntryPoint=0x000EFAF537C ArmGicDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe/DEBUG/ArmScmiDxe.dll 0xEFAEC000
Loading driver at 0x000EFAEB000 EntryPoint=0x000EFAEE4D4 ArmScmiDxe.efi
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00004000 length 0x00000004
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00004001 length 0x00000004
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00004001 length 0x00000004
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00004006 length 0x00000008
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe/DEBUG/AcpiTableDxe.dll 0xEFAE1000
Loading driver at 0x000EFAE0000 EntryPoint=0x000EFAE58B8 AcpiTableDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe/DEBUG/SmbiosDxe.dll 0xEFAD7000
Loading driver at 0x000EFAD6000 EntryPoint=0x000EFADB230 SmbiosDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/I2c/Rk860xRegulatorDxe/Rk860xRegulatorDxe/DEBUG/Rk860xRegulatorDxe.dll 0xEFAD1000
Loading driver at 0x000EFAD0000 EntryPoint=0x000EFAD2DA8 Rk860xRegulatorDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/Rtc8563PlatformDxe/Rtc8563PlatformDxe/DEBUG/RtcPlatformDxe.dll 0xEFACD000
Loading driver at 0x000EFACC000 EntryPoint=0x000EFACE23C RtcPlatformDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/Vop2Dxe/Vop2Dxe/DEBUG/Vop2Dxe.dll 0xEFABB000
Loading driver at 0x000EFABA000 EntryPoint=0x000EFABFAA0 Vop2Dxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Library/DisplayLib/DwHdmiQpLib/DEBUG/DwHdmiQpLib.dll 0xEFAB3000
Loading driver at 0x000EFAB2000 EntryPoint=0x000EFAB5FF8 DwHdmiQpLib.efi
hdmi init start
hdmi init success
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Library/DisplayLib/DwDpLib/DEBUG/DwDpLib.dll 0xEFAAA000
Loading driver at 0x000EFAA9000 EntryPoint=0x000EFAADDC0 DwDpLib.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Library/DisplayLib/DwMipiDsi2Lib/DEBUG/DwMipiDsi2Lib.dll 0xEFA9E000
Loading driver at 0x000EFA9D000 EntryPoint=0x000EFAA1A50 DwMipiDsi2Lib.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/UsbHcdInitDxe/UsbHcd/DEBUG/UsbHcdDxe.dll 0xEFA97000
Loading driver at 0x000EFA96000 EntryPoint=0x000EFA98C60 UsbHcdDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/DpcDxe/DpcDxe/DEBUG/DpcDxe.dll 0xEFA91000
Loading driver at 0x000EFA90000 EntryPoint=0x000EFA924AC DpcDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll 0xEFA82000
Loading driver at 0x000EFA81000 EntryPoint=0x000EFA8A698 DevicePathDxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe/DEBUG/ArmPciCpuIo2Dxe.dll 0xEFA7C000
Loading driver at 0x000EFA7B000 EntryPoint=0x000EFA7D5CC ArmPciCpuIo2Dxe.efi
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/GmacPlatformDxe/GmacPlatformDxe/DEBUG/GmacPlatformDxe.dll 0xEFA75000
Loading driver at 0x000EFA74000 EntryPoint=0x000EFA76B20 GmacPlatformDxe.efi
GpioPinSetDirection Group:3 Pin:15 Direction:1
RealtekPhyInit: Found Realtek RTL8211F GbE PHY
GmacPlatformDxeInitialize: GMAC1 MAC address: 0E:6F:3D:A6:A2:E3
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0xEFA69000
Loading driver at 0x000EFA68000 EntryPoint=0x000EFA6C398 ArmCpuDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/StatusLedDxe/StatusLedDxe/DEBUG/StatusLedDxe.dll
ReplaceTableEntry: splitting block entry with MMU disabled
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/PCD/Dxe/Pcd/DEBUG/PcdDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Core/RuntimeDxe/RuntimeDxe/DEBUG/RuntimeDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe/DEBUG/SecurityStubDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter/DEBUG/EmbeddedMonotonicCounter.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe/DEBUG/ResetSystemRuntimeDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/MetronomeDxe/MetronomeDxe/DEBUG/MetronomeDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe/DEBUG/HiiDatabase.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/RandomNumberGenerator/RngDxe/RngDxe/DEBUG/RngDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/NorFlashDxe/NorFlashDxe/DEBUG/NorFlashDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/RkFvbDxe/RkFvbDxe/DEBUG/RkFvbDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe/DEBUG/VariableRuntimeDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/SerialDxe/SerialDxe/DEBUG/SerialDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/ArmGic/ArmGicDxe/DEBUG/ArmGicDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe/DEBUG/ArmScmiDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe/DEBUG/AcpiTableDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe/DEBUG/SmbiosDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/I2c/Rk860xRegulatorDxe/Rk860xRegulatorDxe/DEBUG/Rk860xRegulatorDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/Rtc8563PlatformDxe/Rtc8563PlatformDxe/DEBUG/RtcPlatformDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/Vop2Dxe/Vop2Dxe/DEBUG/Vop2Dxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Library/DisplayLib/DwHdmiQpLib/DEBUG/DwHdmiQpLib.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Library/DisplayLib/DwDpLib/DEBUG/DwDpLib.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Library/DisplayLib/DwMipiDsi2Lib/DEBUG/DwMipiDsi2Lib.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/UsbHcdInitDxe/UsbHcd/DEBUG/UsbHcdDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/DpcDxe/DpcDxe/DEBUG/DpcDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe/DEBUG/DevicePathDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/ArmPciCpuIo2Dxe/ArmPciCpuIo2Dxe/DEBUG/ArmPciCpuIo2Dxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/GmacPlatformDxe/GmacPlatformDxe/DEBUG/GmacPlatformDxe.dll
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll 0xEFA60000
Loading driver at 0x000EFA5F000 EntryPoint=0x000EFA64290 FaultTolerantWriteDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe/DEBUG/FaultTolerantWriteDxe.dll
Ftw: FtwWorkSpaceLba - 0x10, WorkBlockSize - 0x1000, FtwWorkSpaceBase - 0x0
Ftw: FtwSpareLba - 0x20, SpareBlockSize - 0x1000
Ftw: NumberOfWorkBlock - 0x10, FtwWorkBlockLba - 0x10
Ftw: WorkSpaceLbaInSpare - 0x0, WorkSpaceBaseInSpare - 0x0
Ftw: Remaining work space size - FFE0
Variable PK does not exist.
Variable SetupMode is 1
Variable SecureBoot is 0
Variable SecureBootEnable is 0
Variable CustomMode is 0
Variable VendorKeys is 1
Variable driver will work with auth variable support!
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll 0xEFA5A000
Loading driver at 0x000EFA59000 EntryPoint=0x000EFA5B264 ArmTimerDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/ArmPkg/Drivers/TimerDxe/TimerDxe/DEBUG/ArmTimerDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe/DEBUG/PlatformSmbiosDxe.dll 0xEFA53000
Loading driver at 0x000EFA52000 EntryPoint=0x000EFA54C9C PlatformSmbiosDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/PlatformSmbiosDxe/PlatformSmbiosDxe/DEBUG/PlatformSmbiosDxe.dll
PlatformSmbiosDriverEntryPoint() called
SdramGetMemorySize(): Bank #0: 2 channel(s), type 0x1, version 0x3
SdramGetMemorySize(): Ch #0: 8192 MB
SdramGetMemorySize(): Ch #1: 8192 MB
SdramGetMemorySize(): Bank #1: 2 channel(s), type 0x1, version 0x3
SdramGetMemorySize(): Ch #2: 8192 MB
SdramGetMemorySize(): Ch #3: 8192 MB
SdramGetMemorySize(): Detected 32768 MB RAM
SmbiosAdd: Smbios type 0 with size 0x35 is added to 32-bit table
SmbiosAdd: Smbios type 0 with size 0x35 is added to 64-bit table
SmbiosCreateTable: Initialize 32-bit entry point structure
SmbiosCreateTable() re-allocate SMBIOS 32-bit table
SmbiosCreateTable: Initialize 64-bit entry point structure
SmbiosCreate64BitTable() re-allocate SMBIOS 64-bit table
Board Serial Number: 3E4D4B7E169A8882
SmbiosAdd: Smbios type 1 with size 0x5E is added to 32-bit table
SmbiosAdd: Smbios type 1 with size 0x5E is added to 64-bit table
SmbiosAdd: Smbios type 3 with size 0x43 is added to 32-bit table
SmbiosAdd: Smbios type 3 with size 0x43 is added to 64-bit table
SmbiosAdd: Smbios type 2 with size 0x47 is added to 32-bit table
SmbiosAdd: Smbios type 2 with size 0x47 is added to 64-bit table
SmbiosAdd: Smbios type 7 with size 0x2B is added to 32-bit table
SmbiosAdd: Smbios type 7 with size 0x2B is added to 64-bit table
SmbiosAdd: Smbios type 7 with size 0x24 is added to 32-bit table
SmbiosAdd: Smbios type 7 with size 0x24 is added to 64-bit table
SmbiosAdd: Smbios type 7 with size 0x1F is added to 32-bit table
SmbiosAdd: Smbios type 7 with size 0x1F is added to 64-bit table
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00005006 length 0x00000008
SCMI: SMBIOS reported rate 816000000Hz
SmbiosAdd: Smbios type 4 with size 0x54 is added to 32-bit table
SmbiosAdd: Smbios type 4 with size 0x54 is added to 64-bit table
SmbiosAdd: Smbios type 9 with size 0x21 is added to 32-bit table
SmbiosAdd: Smbios type 9 with size 0x21 is added to 64-bit table
SmbiosAdd: Smbios type 11 with size 0x4F is added to 32-bit table
SmbiosAdd: Smbios type 11 with size 0x4F is added to 64-bit table
SmbiosAdd: Smbios type 16 with size 0x19 is added to 32-bit table
SmbiosAdd: Smbios type 16 with size 0x19 is added to 64-bit table
SmbiosAdd: Smbios type 17 with size 0x67 is added to 32-bit table
SmbiosAdd: Smbios type 17 with size 0x67 is added to 64-bit table
SmbiosAdd: Smbios type 19 with size 0x21 is added to 32-bit table
SmbiosAdd: Smbios type 19 with size 0x21 is added to 64-bit table
SmbiosAdd: Smbios type 32 with size 0xD is added to 32-bit table
SmbiosAdd: Smbios type 32 with size 0xD is added to 64-bit table
PlatformSmbiosDriverEntryPoint() returning
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/HttpUtilitiesDxe/HttpUtilitiesDxe/DEBUG/HttpUtilitiesDxe.dll 0xEFA4C000
Loading driver at 0x000EFA4B000 EntryPoint=0x000EFA4DD68 HttpUtilitiesDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/HttpUtilitiesDxe/HttpUtilitiesDxe/DEBUG/HttpUtilitiesDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe/DEBUG/SetupBrowser.dll 0xEFA30000
Loading driver at 0x000EFA2F000 EntryPoint=0x000EFA30D44 SetupBrowser.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe/DEBUG/SetupBrowser.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/BdsDxe/BdsDxe/DEBUG/BdsDxe.dll 0xEFA14000
Loading driver at 0x000EFA13000 EntryPoint=0x000EFA15150 BdsDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/BdsDxe/BdsDxe/DEBUG/BdsDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/RK3588Dxe/RK3588Dxe/DEBUG/RK3588Dxe.dll 0xEFA05000
Loading driver at 0x000EFA04000 EntryPoint=0x000EFA09854 RK3588Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/RK3588Dxe/RK3588Dxe/DEBUG/RK3588Dxe.dll
InitComPhyConfig reg=FEE00000 FD5BC000 mode = 1
InitComPhyConfig reg=FEE10000 FD5C0000 mode = 0
InitComPhyConfig reg=FEE20000 FD5C4000 mode = 1
RK3588InitPeripherals: Entry
RK806Init(605): base: FEB20000
SpiCongig(565): 0: 0
buck_set_voltage: volt=750000, buck=1, reg=0x1A, mask=0xFF, val=0x28
buck_set_voltage: volt=750000, buck=3, reg=0x1C, mask=0xFF, val=0x28
buck_set_voltage: volt=750000, buck=4, reg=0x1D, mask=0xFF, val=0x28
buck_set_voltage: volt=850000, buck=5, reg=0x1E, mask=0xFF, val=0x38
buck_set_voltage: volt=2000000, buck=7, reg=0x20, mask=0xFF, val=0xB5
buck_set_voltage: volt=3300000, buck=8, reg=0x21, mask=0xFF, val=0xE9
buck_set_voltage: volt=1800000, buck=10, reg=0x23, mask=0xFF, val=0xAD
nldo_set_voltage: volt=750000, ldo=1, reg=0x43, mask=0xFF, val=0x14
nldo_set_voltage: volt=850000, ldo=2, reg=0x44, mask=0xFF, val=0x1C
nldo_set_voltage: volt=750000, ldo=3, reg=0x45, mask=0xFF, val=0x14
nldo_set_voltage: volt=850000, ldo=4, reg=0x46, mask=0xFF, val=0x1C
nldo_set_voltage: volt=750000, ldo=5, reg=0x47, mask=0xFF, val=0x14
pd_e_otgpd_e_otgpd_e_otgpd_e_otgpd_e_otgpd_e_otgadd-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Platform/FriendlyElec/Drivers/LogoDxe/LogoDxe/DEBUG/LogoDxe.dll 0xEF9DB000
Loading driver at 0x000EF9DA000 EntryPoint=0x000EF9DC07C LogoDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Platform/FriendlyElec/Drivers/LogoDxe/LogoDxe/DEBUG/LogoDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll 0xEA630000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll
Loading driver at 0x000EA620000 EntryPoint=0x000EA631490 CapsuleRuntimeDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe/DEBUG/CapsuleRuntimeDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe/DEBUG/SecureBootConfigDxe.dll 0xEF92B000
Loading driver at 0x000EF92A000 EntryPoint=0x000EF930428 SecureBootConfigDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe/DEBUG/SecureBootConfigDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/VariableAuthenticated/SecureBootDefaultKeysDxe/SecureBootDefaultKeysDxe/DEBUG/SecureBootDefaultKeysDxe.dll 0xEF88C000
Loading driver at 0x000EF88B000 EntryPoint=0x000EF895B6C SecureBootDefaultKeysDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/VariableAuthenticated/SecureBootDefaultKeysDxe/SecureBootDefaultKeysDxe/DEBUG/SecureBootDefaultKeysDxe.dll
Variable PKDefault does not exist.
Variable KEKDefault does not exist.
Variable dbDefault does not exist.
Variable dbtDefault does not exist.
SecureBootDefaultKeysEntryPoint: dbtDefault not initialized
Variable dbxDefault does not exist.
SecureBootFetchData: Invalid key format: 0
Content for dbxDefault not found
SecureBootDefaultKeysEntryPoint: Cannot initialize dbxDefault: Invalid Parameter
Error: Image at 000EF88B000 start failed: Invalid Parameter
remove-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/VariableAuthenticated/SecureBootDefaultKeysDxe/SecureBootDefaultKeysDxe/DEBUG/SecureBootDefaultKeysDxe.dll 0xEF88C000
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer/DEBUG/WatchdogTimer.dll 0xEF926000
Loading driver at 0x000EF925000 EntryPoint=0x000EF92717C WatchdogTimer.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer/DEBUG/WatchdogTimer.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/I2c/I2cDxe/I2cDxe/DEBUG/I2cDxe.dll 0xEA5F0000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/I2c/I2cDxe/I2cDxe/DEBUG/I2cDxe.dll
Loading driver at 0x000EA5E0000 EntryPoint=0x000EA5F2600 I2cDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/I2c/I2cDxe/I2cDxe/DEBUG/I2cDxe.dll
GpioPinSetFunction Group:0 Pin:25 Function:3
GpioPinSetFunction Group:0 Pin:26 Function:3
Succesfully installed controller 0 at 0xFD880000
GpioPinSetFunction Group:0 Pin:24 Function:9
GpioPinSetFunction Group:0 Pin:23 Function:9
Succesfully installed controller 6 at 0xFEC80000
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe/DEBUG/LcdGraphicsOutputDxe.dll 0xEF91E000
Loading driver at 0x000EF91D000 EntryPoint=0x000EF920768 LcdGraphicsOutputDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe/DEBUG/LcdGraphicsOutputDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/OhciDxe/OhciDxe/DEBUG/OhciDxe.dll 0xEF912000
Loading driver at 0x000EF911000 EntryPoint=0x000EF918430 OhciDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/OhciDxe/OhciDxe/DEBUG/OhciDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe/DEBUG/RamDiskDxe.dll 0xEF903000
Loading driver at 0x000EF902000 EntryPoint=0x000EF90A634 RamDiskDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe/DEBUG/RamDiskDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/TlsAuthConfigDxe/TlsAuthConfigDxe/DEBUG/TlsAuthConfigDxe.dll 0xEF8F2000
Loading driver at 0x000EF8F1000 EntryPoint=0x000EF8FA778 TlsAuthConfigDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/TlsAuthConfigDxe/TlsAuthConfigDxe/DEBUG/TlsAuthConfigDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe/DEBUG/DisplayEngine.dll 0xEF8DA000
Loading driver at 0x000EF8D9000 EntryPoint=0x000EF8DAADC DisplayEngine.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe/DEBUG/DisplayEngine.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe/DEBUG/PciHostBridgeDxe.dll 0xEF8C9000
Loading driver at 0x000EF8C8000 EntryPoint=0x000EF8D1204 PciHostBridgeDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe/DEBUG/PciHostBridgeDxe.dll
PCIe: Segment 3
PCIe: PciExpressBaseAddress 0x9C0000000
PCIe: ApbBase 0xFE180000
PCIe: DbiBase 0xA40C00000
PCIe: NumLanes 1
PCIe: LinkSpeed 2
GpioPinSetDirection Group:1 Pin:7 Direction:1
PCIe: Setup clocks
PCIe: Switching to RC mode
PCIe: Enabling DBI access
PCIe: Setup BARs
PCIe: Setup iATU
PCIe: Set link speed
PCIe: SetupBars: Speed change
PCIe: Assert reset
PCIe: Start LTSSM
PCIe: Deassert reset
PCIe: Waiting for link up...
PCIe: PciIsLinkUp(): LTSSM_STATUS=0x00000003
PCIe: PciIsLinkUp(): LTSSM_STATUS=0x00030011
PCIe: Link up (x1, 2.5 GT/s)
0xF3000000 0x9D0000000 0xFFFFFFF600010000
PCIe: Segment 4
PCIe: PciExpressBaseAddress 0xA00000000
PCIe: ApbBase 0xFE190000
PCIe: DbiBase 0xA41000000
PCIe: NumLanes 1
PCIe: LinkSpeed 2
GpioPinSetDirection Group:3 Pin:25 Direction:1
PCIe: Setup clocks
PCIe: Switching to RC mode
PCIe: Enabling DBI access
PCIe: Setup BARs
PCIe: Setup iATU
PCIe: Set link speed
PCIe: SetupBars: Speed change
PCIe: Assert reset
PCIe: Start LTSSM
PCIe: Deassert reset
PCIe: Waiting for link up...
PCIe: PciIsLinkUp(): LTSSM_STATUS=0x00000003
PCIe: PciIsLinkUp(): LTSSM_STATUS=0x00130011
PCIe: Link up (x1, 5.0 GT/s)
0xF4000000 0xA10000000 0xFFFFFFF5C0010000
RootBridge: PcieRoot(0x3)
Support/Attr: 70069 / 70069
DmaAbove4G: Yes
NoExtConfSpace: No
AllocAttr: 3 (CombineMemPMem Mem64Decode)
Bus: 0 - FC Translation=0
Io: 0 - FFFF Translation=FFFFFFF600010000
Mem: F3000000 - F3FFFFFF Translation=0
MemAbove4G: 9D0000000 - 9FFFEFFFF Translation=0
PMem: FFFFFFFFFFFFFFFF - 0 Translation=0
PMemAbove4G: FFFFFFFFFFFFFFFF - 0 Translation=0
RootBridge: PcieRoot(0x4)
Support/Attr: 70069 / 70069
DmaAbove4G: Yes
NoExtConfSpace: No
AllocAttr: 3 (CombineMemPMem Mem64Decode)
Bus: 0 - FC Translation=0
Io: 0 - FFFF Translation=FFFFFFF5C0010000
Mem: F4000000 - F4FFFFFF Translation=0
MemAbove4G: A10000000 - A3FFEFFFF Translation=0
PMem: FFFFFFFFFFFFFFFF - 0 Translation=0
PMemAbove4G: FFFFFFFFFFFFFFFF - 0 Translation=0
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/Drivers/NonCoherentIoMmuDxe/NonCoherentIoMmuDxe/DEBUG/NonCoherentIoMmuDxe.dll 0xEF8C2000
Loading driver at 0x000EF8C1000 EntryPoint=0x000EF8C3EB8 NonCoherentIoMmuDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/Drivers/NonCoherentIoMmuDxe/NonCoherentIoMmuDxe/DEBUG/NonCoherentIoMmuDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/UsbDpPhyDxe/UsbDpPhyDxe/DEBUG/UsbDpPhyDxe.dll 0xEF8BB000
Loading driver at 0x000EF8BA000 EntryPoint=0x000EF8BD0FC UsbDpPhyDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/UsbDpPhyDxe/UsbDpPhyDxe/DEBUG/UsbDpPhyDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/AcpiPlatformDxe/AcpiPlatformDxe/DEBUG/AcpiPlatformDxe.dll 0xEF8B5000
Loading driver at 0x000EF8B4000 EntryPoint=0x000EF8B765C AcpiPlatformDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/AcpiPlatformDxe/AcpiPlatformDxe/DEBUG/AcpiPlatformDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/FdtPlatformDxe/FdtPlatformDxe/DEBUG/FdtPlatformDxe.dll 0xEF8AA000
Loading driver at 0x000EF8A9000 EntryPoint=0x000EF8AEEE4 FdtPlatformDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/FdtPlatformDxe/FdtPlatformDxe/DEBUG/FdtPlatformDxe.dll
FdtPlatform: FDT support is disabled by the settings.
Error: Image at 000EF8A9000 start failed: Unsupported
remove-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/RK3588/Drivers/FdtPlatformDxe/FdtPlatformDxe/DEBUG/FdtPlatformDxe.dll 0xEF8AA000
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll 0xEA5B0000
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll
Loading driver at 0x000EA5A0000 EntryPoint=0x000EA5B19A4 RealTimeClock.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe/DEBUG/RealTimeClock.dll
I2cMasterRegistrationEvent: found I2C master!
InitializeRealTimeClock: using default timezone/daylight settings
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/Hash2DxeCrypto/Hash2DxeCrypto/DEBUG/Hash2DxeCrypto.dll 0xEF8AD000
Loading driver at 0x000EF8AC000 EntryPoint=0x000EF8AFA80 Hash2DxeCrypto.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/SecurityPkg/Hash2DxeCrypto/Hash2DxeCrypto/DEBUG/Hash2DxeCrypto.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll 0xEF8A5000
Loading driver at 0x000EF8A4000 EntryPoint=0x000EF8A7AF4 ConPlatformDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe/DEBUG/ConPlatformDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe/DEBUG/ConSplitterDxe.dll 0xEF89A000
Loading driver at 0x000EF899000 EntryPoint=0x000EF8A0080 ConSplitterDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe/DEBUG/ConSplitterDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe/DEBUG/GraphicsConsoleDxe.dll 0xEF891000
Loading driver at 0x000EF890000 EntryPoint=0x000EF8943E8 GraphicsConsoleDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe/DEBUG/GraphicsConsoleDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll 0xEF885000
Loading driver at 0x000EF884000 EntryPoint=0x000EF88B608 TerminalDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe/DEBUG/TerminalDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe/DEBUG/BootGraphicsResourceTableDxe.dll 0xEF87F000
Loading driver at 0x000EF87E000 EntryPoint=0x000EF88098C BootGraphicsResourceTableDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe/DEBUG/BootGraphicsResourceTableDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxe/DEBUG/I2cDxe.dll 0xEF876000
Loading driver at 0x000EF875000 EntryPoint=0x000EF879B98 I2cDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/I2c/I2cDxe/I2cDxe/DEBUG/I2cDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe/DEBUG/EhciDxe.dll 0xEF86A000
Loading driver at 0x000EF869000 EntryPoint=0x000EF870A60 EhciDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe/DEBUG/EhciDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe/DEBUG/XhciDxe.dll 0xEF859000
Loading driver at 0x000EF858000 EntryPoint=0x000EF85C9D4 XhciDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe/DEBUG/XhciDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe/DEBUG/UsbBusDxe.dll 0xEF84C000
Loading driver at 0x000EF84B000 EntryPoint=0x000EF852FD4 UsbBusDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe/DEBUG/UsbBusDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe/DEBUG/UsbMassStorageDxe.dll 0xEF842000
Loading driver at 0x000EF841000 EntryPoint=0x000EF8465E4 UsbMassStorageDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe/DEBUG/UsbMassStorageDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe/DEBUG/UsbKbDxe.dll 0xEF837000
Loading driver at 0x000EF836000 EntryPoint=0x000EF83CB3C UsbKbDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe/DEBUG/UsbKbDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe/DEBUG/UsbMouseDxe.dll 0xEF82F000
Loading driver at 0x000EF82E000 EntryPoint=0x000EF831EC8 UsbMouseDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe/DEBUG/UsbMouseDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe/DEBUG/UsbMouseAbsolutePointerDxe.dll 0xEF827000
Loading driver at 0x000EF826000 EntryPoint=0x000EF829F24 UsbMouseAbsolutePointerDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Usb/UsbMouseAbsolutePointerDxe/UsbMouseAbsolutePointerDxe/DEBUG/UsbMouseAbsolutePointerDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe/DEBUG/NonDiscoverablePciDeviceDxe.dll 0xEF81F000
Loading driver at 0x000EF81E000 EntryPoint=0x000EF822570 NonDiscoverablePciDeviceDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe/DEBUG/NonDiscoverablePciDeviceDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Sd/SdDxe/SdDxe/DEBUG/SdDxe.dll 0xEF815000
Loading driver at 0x000EF814000 EntryPoint=0x000EF8195CC SdDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Sd/SdDxe/SdDxe/DEBUG/SdDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe/DEBUG/EmmcDxe.dll 0xEF809000
Loading driver at 0x000EF808000 EntryPoint=0x000EF80E8EC EmmcDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe/DEBUG/EmmcDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Synopsys/DesignWare/Drivers/DwMmcHcDxe/DwMmcHcDxe/DEBUG/DwMmcHcDxe.dll 0xEF7FD000
Loading driver at 0x000EF7FC000 EntryPoint=0x000EF802E6C DwMmcHcDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Synopsys/DesignWare/Drivers/DwMmcHcDxe/DwMmcHcDxe/DEBUG/DwMmcHcDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/RkSdmmcDxe/RkSdmmcDxe/DEBUG/RkSdmmcDxe.dll 0xEF7F7000
Loading driver at 0x000EF7F6000 EntryPoint=0x000EF7F82A0 RkSdmmcDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/RkSdmmcDxe/RkSdmmcDxe/DEBUG/RkSdmmcDxe.dll
GpioPinSetDirection Group:0 Pin:4 Direction:0
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00005005 length 0x00000014
== Slot [0] Capability is 0xEE7A6CA0 ==
Base Clk Freq 52000KHz
BusWidth 4
HighSpeed Support TRUE
Voltage 1.8 FALSE
64-bit Sys Bus FALSE
SlotType Removable Slot
SDR50 Support FALSE
SDR104 Support FALSE
DDR50 Support FALSE
BaseClkFreq 52000KHz Divisor 65 ClockFreq 400Khz
EmmcIdentification: Executing Cmd0 fails with No Media
SdCardIdentification: Executing Cmd0 fails with No Media
DwMmcHcDriverBindingStart: Success End on EE7A6F18
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe/DEBUG/SdMmcPciHcDxe.dll 0xEF7E9000
Loading driver at 0x000EF7E8000 EntryPoint=0x000EF7F0D9C SdMmcPciHcDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe/DEBUG/SdMmcPciHcDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/DwcSdhciDxe/DwcSdhciDxe/DEBUG/DwcSdhciDxe.dll 0xEF7E3000
Loading driver at 0x000EF7E2000 EntryPoint=0x000EF7E4934 DwcSdhciDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Silicon/Rockchip/Drivers/DwcSdhciDxe/DwcSdhciDxe/DEBUG/DwcSdhciDxe.dll
SdMmcPciHcDriverBindingStart: Start
SdMmcPciHcDriverBindingStart: found SD/MMC override protocol
EmmcSdMmcNotifyPhase
== Slot [0] Capability is 0x880000072265C881 ==
Timeout Clk Freq 1MHz
Base Clk Freq 200MHz
Max Blk Len 1024bytes
8-bit Support TRUE
ADMA2 Support FALSE
HighSpeed Support TRUE
SDMA Support TRUE
Suspend/Resume FALSE
Voltage 3.3 FALSE
Voltage 3.0 TRUE
Voltage 1.8 FALSE
V4 64-bit Sys Bus FALSE
V3 64-bit Sys Bus FALSE
Async Interrupt TRUE
SlotType Removable Slot
SDR50 Support TRUE
SDR104 Support TRUE
DDR50 Support TRUE
Driver Type A FALSE
Driver Type C FALSE
Driver Type D FALSE
Driver Type 4 FALSE
Retuning TimerCnt Disabled
SDR50 Tuning FALSE
Retuning Mode Mode 1
Clock Multiplier M = 1
HS 400 TRUE
Slot[0] Base Clock Frequency: 200MHz
EmmcSdMmcNotifyPhase
EmmcSdMmcNotifyPhase
EmmcSdMmcNotifyPhase
Enabled V4 26 bit data length ADMA support
BaseClkFreq 200MHz Divisor 250 ClockFreq 400Khz
EmmcSdMmcNotifyPhase
EmmcIdentification: Found a EMMC device at slot [0], RCA [1]
EmmcSetBusMode: Target bus mode: timing = 11, width = 8, clock freq = 200, driver strength = 0
EmmcSdMmcNotifyPhase
BaseClkFreq 200MHz Divisor 0 ClockFreq 200000Khz
EmmcSdMmcNotifyPhase
EmmcSdMmcNotifyPhase
BaseClkFreq 200MHz Divisor 2 ClockFreq 52000Khz
EmmcSdMmcNotifyPhase
EmmcSdMmcNotifyPhase
BaseClkFreq 200MHz Divisor 0 ClockFreq 200000Khz
EmmcSdMmcNotifyPhase
EmmcSetBusMode: Switch to HS400 Success
SdMmcPciHcDriverBindingStart: Success End on EE7A5698
Error reported by SDHCI
Interrupt status = 8101
Error interrupt status = 1
TRB failed with Device Error
Printing SD_MMC_HC_TRB
Slot: 0
BlockSize: 512
Data: 0
DataLen: 0
Read: 0
DataPhy: 0
DataMap: 0
Mode: 0
AdmaLengthMode: 0
Event: 0
Started: 0
CommandComplete: 0
Timeout: 2500000
Retries: 5
PioModeTransferCompleted: 0
PioBlockIndex: 0
Adma32Desc: 0
Adma64V3Desc: 0
Adma64V4Desc: 0
AdmaMap: 0
AdmaPages: 0
Printing EFI_SD_MMC_PASS_THRU_COMMAND_PACKET
Command index: 7, argument: 0
Command type: 2, response type: 0
Response 0: 0, 1: 0, 2: 0, 3: 0
Timeout: 2500000
InDataBuffer: 0
OutDataBuffer: 0
InTransferLength: 0
OutTransferLength: 0
TransactionStatus: Success
== Dump Emmc Csd Register==
CSD structure 0x3
System specification version 0x4
Data read access-time 1 0xFF
Data read access-time 2 0xFF
Max. bus clock frequency 0x32
Device command classes 0x9F5
Max. read data block length 0x9
Partial blocks for read allowed 0x0
Write block misalignment 0x0
Read block misalignment 0x0
DSR implemented 0x0
Device size 0xFFF
Max. read current @ VDD min 0x7
Max. read current @ VDD max 0x7
Max. write current @ VDD min 0x7
Max. write current @ VDD max 0x7
Device size multiplier 0x7
Erase group size 0x1F
Erase group size multiplier 0x1F
Write protect group size 0xF
Write protect group enable 0x1
Manufacturer default ECC 0x0
Write speed factor 0x5
Max. write data block length 0x9
Partial blocks for write allowed 0x0
Content protection application 0x0
File format group 0x0
Copy flag (OTP) 0x0
Permanent write protection 0x0
Temporary write protection 0x0
File format 0x0
ECC code 0x0
==Dump Emmc ExtCsd Register==
Supported Command Sets 0x0
HPI features 0x1
Background operations support 0x1
Background operations status 0x0
Number of correctly programmed sectors 0x180
Initialization time after partitioning 0x1E
TRIM Multiplier 0x5
Secure Feature support 0x55
Secure Erase Multiplier 0x1B
Secure TRIM Multiplier 0x11
Boot information 0x7
Boot partition size 0x20
Access size 0x6
High-capacity erase unit size 0x1
High-capacity erase timeout 0x5
Reliable write sector count 0x1
High-capacity write protect group size 0x10
Sleep/awake timeout 0x16
Sector Count 0x733C000
Partition switching timing 0xA
Out-of-interrupt busy timing 0x5
I/O Driver Strength 0x1F
Device type 0x57
CSD STRUCTURE 0x2
Extended CSD revision 0x8
Command set 0x0
Command set revision 0x0
Power class 0x0
High-speed interface timing 0x3
Bus width mode 0x0
Erased memory content 0x0
Partition configuration 0x0
Boot config protection 0x0
Boot bus Conditions 0x0
High-density erase group definition 0x0
Boot write protection status register 0x0
Boot area write protection register 0x0
User area write protection register 0x0
FW configuration 0x0
RPMB Size 0x80
H/W reset function 0x0
Partitioning Support 0x7
Max Enhanced Area Size 0x00099A
Partitions attribute 0x0
Partitioning Setting 0x0
General Purpose Partition 1 Size 0x000000
General Purpose Partition 2 Size 0x000000
General Purpose Partition 3 Size 0x000000
General Purpose Partition 4 Size 0x000000
Enhanced User Data Area Size 0x000000
Enhanced User Data Start Address 0x0
Bad Block Management mode 0x0
Native sector size 0x0
Sector size emulation 0x0
Sector size 0x0
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe/DEBUG/SataController.dll 0xEF7DC000
Loading driver at 0x000EF7DB000 EntryPoint=0x000EF7DE0B0 SataController.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/SataControllerDxe/SataControllerDxe/DEBUG/SataController.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru/DEBUG/AtaAtapiPassThruDxe.dll 0xEF7CD000
Loading driver at 0x000EF7CC000 EntryPoint=0x000EF7D5B70 AtaAtapiPassThruDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru/DEBUG/AtaAtapiPassThruDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe/DEBUG/AtaBusDxe.dll 0xEF7C3000
Loading driver at 0x000EF7C2000 EntryPoint=0x000EF7C7864 AtaBusDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe/DEBUG/AtaBusDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll 0xEF7BB000
Loading driver at 0x000EF7BA000 EntryPoint=0x000EF7BE1D4 DiskIoDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe/DEBUG/DiskIoDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll 0xEF7B1000
Loading driver at 0x000EF7B0000 EntryPoint=0x000EF7B5D04 PartitionDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe/DEBUG/PartitionDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll 0xEF7A2000
Loading driver at 0x000EF7A1000 EntryPoint=0x000EF7AB1FC Fat.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/FatPkg/EnhancedFatDxe/Fat/DEBUG/Fat.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll 0xEF79D000
Loading driver at 0x000EF79C000 EntryPoint=0x000EF79E328 EnglishDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe/DEBUG/EnglishDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/SnpDxe/SnpDxe/DEBUG/SnpDxe.dll 0xEF792000
Loading driver at 0x000EF791000 EntryPoint=0x000EF796CAC SnpDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/SnpDxe/SnpDxe/DEBUG/SnpDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/VlanConfigDxe/VlanConfigDxe/DEBUG/VlanConfigDxe.dll 0xEF788000
Loading driver at 0x000EF787000 EntryPoint=0x000EF78C9DC VlanConfigDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/VlanConfigDxe/VlanConfigDxe/DEBUG/VlanConfigDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/MnpDxe/MnpDxe/DEBUG/MnpDxe.dll 0xEF77A000
Loading driver at 0x000EF779000 EntryPoint=0x000EF781F18 MnpDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/MnpDxe/MnpDxe/DEBUG/MnpDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/ArpDxe/ArpDxe/DEBUG/ArpDxe.dll 0xEF770000
Loading driver at 0x000EF76F000 EntryPoint=0x000EF774534 ArpDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/ArpDxe/ArpDxe/DEBUG/ArpDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Dhcp4Dxe/Dhcp4Dxe/DEBUG/Dhcp4Dxe.dll 0xEF763000
Loading driver at 0x000EF762000 EntryPoint=0x000EF76AA14 Dhcp4Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Dhcp4Dxe/Dhcp4Dxe/DEBUG/Dhcp4Dxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Ip4Dxe/Ip4Dxe/DEBUG/Ip4Dxe.dll 0xEF74C000
Loading driver at 0x000EF74B000 EntryPoint=0x000EF74E018 Ip4Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Ip4Dxe/Ip4Dxe/DEBUG/Ip4Dxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Udp4Dxe/Udp4Dxe/DEBUG/Udp4Dxe.dll 0xEF73F000
Loading driver at 0x000EF73E000 EntryPoint=0x000EF746958 Udp4Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Udp4Dxe/Udp4Dxe/DEBUG/Udp4Dxe.dll
Failed to generate random data using secure algorithm 0: Unsupported
Failed to generate random data using secure algorithm 1: Unsupported
Failed to generate random data using secure algorithm 2: Unsupported
Failed to generate random data using secure algorithm 3: Unsupported
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Mtftp4Dxe/Mtftp4Dxe/DEBUG/Mtftp4Dxe.dll 0xEF732000
Loading driver at 0x000EF731000 EntryPoint=0x000EF738D18 Mtftp4Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Mtftp4Dxe/Mtftp4Dxe/DEBUG/Mtftp4Dxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Dhcp6Dxe/Dhcp6Dxe/DEBUG/Dhcp6Dxe.dll 0xEF723000
Loading driver at 0x000EF722000 EntryPoint=0x000EF72BF4C Dhcp6Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Dhcp6Dxe/Dhcp6Dxe/DEBUG/Dhcp6Dxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Ip6Dxe/Ip6Dxe/DEBUG/Ip6Dxe.dll 0xEF704000
Loading driver at 0x000EF703000 EntryPoint=0x000EF706978 Ip6Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Ip6Dxe/Ip6Dxe/DEBUG/Ip6Dxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Udp6Dxe/Udp6Dxe/DEBUG/Udp6Dxe.dll 0xEF6F8000
Loading driver at 0x000EF6F7000 EntryPoint=0x000EF6FE7FC Udp6Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Udp6Dxe/Udp6Dxe/DEBUG/Udp6Dxe.dll
Failed to generate random data using secure algorithm 0: Unsupported
Failed to generate random data using secure algorithm 1: Unsupported
Failed to generate random data using secure algorithm 2: Unsupported
Failed to generate random data using secure algorithm 3: Unsupported
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Mtftp6Dxe/Mtftp6Dxe/DEBUG/Mtftp6Dxe.dll 0xEF6EB000
Loading driver at 0x000EF6EA000 EntryPoint=0x000EF6F2238 Mtftp6Dxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/Mtftp6Dxe/Mtftp6Dxe/DEBUG/Mtftp6Dxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe/DEBUG/UefiPxeBcDxe.dll 0xEF6D7000
Loading driver at 0x000EF6D6000 EntryPoint=0x000EF6DAA24 UefiPxeBcDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/UefiPxeBcDxe/UefiPxeBcDxe/DEBUG/UefiPxeBcDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/TlsDxe/TlsDxe/DEBUG/TlsDxe.dll 0xEA4B4000
Loading driver at 0x000EA4B3000 EntryPoint=0x000EA4BDF38 TlsDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/TlsDxe/TlsDxe/DEBUG/TlsDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/DnsDxe/DnsDxe/DEBUG/DnsDxe.dll 0xEF6C7000
Loading driver at 0x000EF6C6000 EntryPoint=0x000EF6D1940 DnsDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/DnsDxe/DnsDxe/DEBUG/DnsDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/HttpDxe/HttpDxe/DEBUG/HttpDxe.dll 0xEF6B6000
Loading driver at 0x000EF6B5000 EntryPoint=0x000EF6BFE68 HttpDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/HttpDxe/HttpDxe/DEBUG/HttpDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/HttpBootDxe/HttpBootDxe/DEBUG/HttpBootDxe.dll 0xEF6A1000
Loading driver at 0x000EF6A0000 EntryPoint=0x000EF6A29C4 HttpBootDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/HttpBootDxe/HttpBootDxe/DEBUG/HttpBootDxe.dll
Loading driver at 0x00180000000 EntryPoint=0x00180002008
Loading driver at 0x00180000000 EntryPoint=0x00180002008
ConvertPages: Incompatible memory types, the pages to allocate have been allocated
Loading driver at 0x000EF687000 EntryPoint=0x000EF689008
Loading driver at 0x000EF687000 EntryPoint=0x000EF689008
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Drivers/ASIX/Bus/Usb/UsbNetworking/Ax88772c/Ax88772c/DEBUG/Ax88772c.dll 0xEF67F000
Loading driver at 0x000EF67E000 EntryPoint=0x000EF683090 Ax88772c.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/Drivers/ASIX/Bus/Usb/UsbNetworking/Ax88772c/Ax88772c/DEBUG/Ax88772c.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe/DEBUG/PciBusDxe.dll 0xEF669000
Loading driver at 0x000EF668000 EntryPoint=0x000EF670FE0 PciBusDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe/DEBUG/PciBusDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe/DEBUG/NvmExpressDxe.dll 0xEF65B000
Loading driver at 0x000EF65A000 EntryPoint=0x000EF662D3C NvmExpressDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe/DEBUG/NvmExpressDxe.dll
add-symbol-file /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/TcpDxe/TcpDxe/DEBUG/TcpDxe.dll 0xEF644000
Loading driver at 0x000EF643000 EntryPoint=0x000EF6460D8 TcpDxe.efi
Image - /home/runner/work/edk2-rk3588/edk2-rk3588/workspace/Build/NanoPi-M6/DEBUG_GCC/AARCH64/NetworkPkg/TcpDxe/TcpDxe/DEBUG/TcpDxe.dll
Failed to generate random data using secure algorithm 0: Unsupported
Failed to generate random data using secure algorithm 1: Unsupported
Failed to generate random data using secure algorithm 2: Unsupported
Failed to generate random data using secure algorithm 3: Unsupported
Failed to generate random data using secure algorithm 0: Unsupported
Failed to generate random data using secure algorithm 1: Unsupported
Failed to generate random data using secure algorithm 2: Unsupported
Failed to generate random data using secure algorithm 3: Unsupported
[Bds] Entry...
[BdsDxe] Locate Variable Policy protocol - Success
Variable Driver Auto Update PlatformLang, PlatformLang:en, Lang:eng Status: Success
- Found 'DBG2' ACPI Table
- Found 'FACP' ACPI Table
- Found 'GTDT' ACPI Table
- Found 'APIC' ACPI Table
- Found 'MCFG' ACPI Table
- Found 'PPTT' ACPI Table
- Found 'SPCR' ACPI Table
- Found 'DSDT' ACPI Table
DwHdmiQpConnectorPreInitGpioPinSetFunction Group:4 Pin:15 Function:5
GpioPinSetFunction Group:4 Pin:16 Function:5
HdptxRopllCmnConfig HdptxRopllCmnConfig start
HdptxRopllCmnConfig HdptxRopllCmnConfig 1485000
HdptxRopllCmnConfig HdptxRopllCmnConfig 2
HdptxRopllCmnConfig HdptxRopllCmnConfig end
HdptxPostEnablePll hdptx phy pll locked!
DwHdmiQpConnectorPreInit hdmi pre init success
vp0 have layer nr:0[], primary plane: 2
vp1 have layer nr:4[0 1 2 3 ], primary plane: 2
vp2 have layer nr:4[6 7 8 9 ], primary plane: 8
vp3 have layer nr:0[], primary plane: 2
Rk860xRegulatorSupported: attached to RK860X_REGULATOR device
Rk860xRegulatorSupported: attached to RK860X_REGULATOR device
UsbPortPowerEnable called
GpioPinSetDirection Group:4 Pin:13 Direction:1
GpioPinSetDirection Group:1 Pin:26 Direction:1
[Variable]END_OF_DXE is signaled
Initialize variable error flag (FF)
PCI Bus First Scanning
PciBus: Discovered PPB @ [00|00|00] [VID = 0x1D87, DID = 0x3588]
PciBus: Discovered PCI @ [01|00|00] [VID = 0x10EC, DID = 0xC822]
BAR[0]: Type = Io32; Alignment = 0xFF; Length = 0x100; Offset = 0x10
BAR[2]: Type = Mem64; Alignment = 0xFFFF; Length = 0x10000; Offset = 0x18
PciBus: Discovered PPB @ [00|00|00] [VID = 0x1D87, DID = 0x3588]
PciBus: Discovered PCI @ [01|00|00] [VID = 0x144D, DID = 0xA809]
BAR[0]: Type = Mem64; Alignment = 0x3FFF; Length = 0x4000; Offset = 0x10
PciBus: Discovered PPB @ [00|00|00] [VID = 0x1D87, DID = 0x3588]
PciBus: Discovered PCI @ [01|00|00] [VID = 0x10EC, DID = 0xC822]
BAR[0]: Type = Io32; Alignment = 0xFF; Length = 0x100; Offset = 0x10
BAR[2]: Type = Mem64; Alignment = 0xFFFF; Length = 0x10000; Offset = 0x18
PciBus: Discovered PPB @ [00|00|00] [VID = 0x1D87, DID = 0x3588]
PciBus: Discovered PCI @ [01|00|00] [VID = 0x144D, DID = 0xA809]
BAR[0]: Type = Mem64; Alignment = 0x3FFF; Length = 0x4000; Offset = 0x10
PciHostBridge: SubmitResources for PcieRoot(0x3)
I/O: Granularity/SpecificFlag = 0 / 01
Length/Alignment = 0x1000 / 0xFFF
Mem: Granularity/SpecificFlag = 32 / 00
Length/Alignment = 0x200000 / 0xFFFFF
PciBus: HostBridge->SubmitResources() - Success
PciHostBridge: SubmitResources for PcieRoot(0x4)
Mem: Granularity/SpecificFlag = 32 / 00
Length/Alignment = 0x200000 / 0xFFFFF
PciBus: HostBridge->SubmitResources() - Success
PciHostBridge: NotifyPhase (AllocateResources)
RootBridge: PcieRoot(0x3)
Mem: Base/Length/Alignment = F3000000/200000/FFFFF - Success
I/O: Base/Length/Alignment = 9FFFF0000/1000/FFF - Success
RootBridge: PcieRoot(0x4)
Mem: Base/Length/Alignment = F4000000/200000/FFFFF - Success
PciBus: HostBridge->NotifyPhase(AllocateResources) - Success
Process Option ROM: BAR Base/Length = F3100000/10000
PciBus: Resource Map for Root Bridge PcieRoot(0x3)
Type = Io16; Base = 0x0; Length = 0x1000; Alignment = 0xFFF
Base = 0x0; Length = 0x1000; Alignment = 0xFFF; Owner = PPB [00|00|00:**]
Type = Mem32; Base = 0xF3000000; Length = 0x200000; Alignment = 0xFFFFF
Base = 0xF3000000; Length = 0x100000; Alignment = 0xFFFFF; Owner = PPB [00|00|00:**]
Base = 0xF3100000; Length = 0x10000; Alignment = 0xFFFF; Owner = PCI [00|00|00:00]; Type = OpRom
PciBus: Resource Map for Bridge [00|00|00]
Type = Io16; Base = 0x0; Length = 0x1000; Alignment = 0xFFF
Base = 0x0; Length = 0x100; Alignment = 0xFF; Owner = PCI [01|00|00:10]
Type = Mem32; Base = 0xF3000000; Length = 0x100000; Alignment = 0xFFFFF
Base = 0xF3000000; Length = 0x10000; Alignment = 0xFFFF; Owner = PCI [01|00|00:18]
Process Option ROM: BAR Base/Length = F4100000/10000
PciBus: Resource Map for Root Bridge PcieRoot(0x4)
Type = Mem32; Base = 0xF4000000; Length = 0x200000; Alignment = 0xFFFFF
Base = 0xF4000000; Length = 0x100000; Alignment = 0xFFFFF; Owner = PPB [00|00|00:**]
Base = 0xF4100000; Length = 0x10000; Alignment = 0xFFFF; Owner = PCI [00|00|00:00]; Type = OpRom
PciBus: Resource Map for Bridge [00|00|00]
Type = Mem32; Base = 0xF4000000; Length = 0x100000; Alignment = 0xFFFFF
Base = 0xF4000000; Length = 0x4000; Alignment = 0x3FFF; Owner = PCI [01|00|00:10]
XHCI: Initialize DWC3 at 0xFC000000
XhcCreateUsb3Hc: Capability length 0x20
XhcCreateUsb3Hc: HcSParams1 0x2000140
XhcCreateUsb3Hc: HcSParams2 0xC0000F1
XhcCreateUsb3Hc: HcCParams 0x220FE64
XhcCreateUsb3Hc: DBOff 0x480
XhcCreateUsb3Hc: RTSOff 0x440
XhcCreateUsb3Hc: UsbLegSupOffset 0x0
XhcCreateUsb3Hc: DebugCapSupOffset 0xFFFFFFFF
XhcCreateUsb3Hc: Usb2SupOffset 0x10
XhcCreateUsb3Hc: Usb3SupOffset 0x20
XhcSetBiosOwnership: called to set BIOS ownership
XhcResetHC!
XhcInitSched:DCBAA=0xEE735000
XhcInitSched: Created CMD ring [EE735240~EE736240) EVENT ring [EE736240~EE738240)
XhcDriverBindingStart: XHCI started for controller @ EE760B98
XhcGetCapability: 2 ports, 64 bit 0
XHCI: Initialize DWC3 at 0xFCD00000
XhcCreateUsb3Hc: Capability length 0x20
XhcCreateUsb3Hc: HcSParams1 0x2000140
XhcCreateUsb3Hc: HcSParams2 0xC0000F1
XhcCreateUsb3Hc: HcCParams 0x220FE64
XhcCreateUsb3Hc: DBOff 0x480
XhcCreateUsb3Hc: RTSOff 0x440
XhcCreateUsb3Hc: UsbLegSupOffset 0x0
XhcCreateUsb3Hc: DebugCapSupOffset 0xFFFFFFFF
XhcCreateUsb3Hc: Usb2SupOffset 0x10
XhcCreateUsb3Hc: Usb3SupOffset 0x20
XhcSetBiosOwnership: called to set BIOS ownership
XhcResetHC!
XhcInitSched:DCBAA=0xEE70C000
XhcInitSched: Created CMD ring [EE70C240~EE70D240) EVENT ring [EE70D240~EE70F240)
XhcDriverBindingStart: XHCI started for controller @ EE82DC18
XhcGetCapability: 2 ports, 64 bit 0
EhcCreateUsb2Hc: capability length 16
EhcClearLegacySupport: called to clear legacy support
EhcDriverBindingStart: EHCI started for controller @ EE760298
EhcGetCapability: 1 ports, 64 bit 0
EhcCreateUsb2Hc: capability length 16
EhcClearLegacySupport: called to clear legacy support
EhcDriverBindingStart: EHCI started for controller @ EE760718
EhcGetCapability: 1 ports, 64 bit 0
EhcSetRootHubPortFeature: exit status Success
EhcClearRootHubPortFeature: exit status Success
EhcClearRootHubPortFeature: exit status Success
UsbSelectConfig: failed to connect driver - Not Found, ignored
UsbSelectConfig: failed to connect driver - Not Found, ignored
OHCI started for controller @ EE760918, base address: 0xFC840000
OHCI started for controller @ EE760598, base address: 0xFC8C0000
FvbCheckIsBootDevice: DevPath type 0x1 subtype 0x4
FvbDiskIoRegistrationHandler: [VenHw(0D51905B-B77E-452A-A2C0-ECA0CC8D514A,00002EFE0000000000)/eMMC(0x0)/Ctrl(0x0)] Found boot disk for NV storage!
BootDiscoveryPolicyHandler - Failed to locate gEfiBootManagerPolicyProtocolGuid.Driver connect will be skipped.
HandleCapsules: processing capsules ...
[Bds]OsIndication: 0000000000000000
[Bds]=============Begin Load Options Dumping ...=============
Driver Options:
SysPrep Options:
Boot Options:
Boot0000: UiApp 0x0109
Boot0001: UEFI Shell 0x0000
PlatformRecovery Options:
PlatformRecovery0000: Default PlatformRecovery 0x0001
[Bds]=============End Load Options Dumping=============
[Bds]BdsWait ...Zzzzzzzzzzzz...
[Bds]BdsWait(10)..Zzzz...
[Bds]BdsWait(9)..Zzzz...
[Bds]BdsWait(8)..Zzzz...
[Bds]BdsWait(7)..Zzzz...
[Bds]BdsWait(6)..Zzzz...
[Bds]BdsWait(5)..Zzzz...
[Bds]BdsWait(4)..Zzzz...
[Bds]BdsWait(3)..Zzzz...
[Bds]BdsWait(2)..Zzzz...
[Bds]BdsWait(1)..Zzzz...
[Bds]Exit the waiting!
[Bds]Stop Hotkey Service!
[Bds]UnregisterKeyNotify: 000C/0000 Success
[Bds]UnregisterKeyNotify: 0017/0000 Success
[Bds]UnregisterKeyNotify: 0000/0073 Success
[Bds]UnregisterKeyNotify: 0000/000D Success
RK3588NotifyReadyToBoot: called. Configure CPU voltages once.
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00005006 length 0x00000008
buck_set_voltage: volt=675000, buck=2, reg=0x1B, mask=0xFF, val=0x1C
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00005006 length 0x00000008
Found 0x42 on I2C bus 0 for tag 2
Current voltage: 675000 uV
Setting voltage to: 675000 uV
Current voltage: 675000 uV
MtlSendMessage ringing doorbell 0x82000010 with message header 0x00005006 length 0x00000008
Found 0x43 on I2C bus 0 for tag 3
Current voltage: 675000 uV
Setting voltage to: 675000 uV
Current voltage: 675000 uV
Process PlatformRecovery0000 (Default PlatformRecovery) ...
NvmExpressDriverBindingStart: start
Cc.En: 0
Cc.Css: 0
Cc.Mps: 0
Cc.Ams: 0
Cc.Shn: 0
Cc.Iosqes: 0
Cc.Iocqes: 0
NVMe controller is disabled with status [Success].
Private->Buffer = [00000000EE640000]
Admin Submission Queue size (Aqa.Asqs) = [00000001]
Admin Completion Queue size (Aqa.Acqs) = [00000001]
Admin Submission Queue (SqBuffer[0]) = [00000000EE640000]
Admin Completion Queue (CqBuffer[0]) = [00000000EE641000]
Sync I/O Submission Queue (SqBuffer[1]) = [00000000EE642000]
Sync I/O Completion Queue (CqBuffer[1]) = [00000000EE643000]
Async I/O Submission Queue (SqBuffer[2]) = [00000000EE644000]
Async I/O Completion Queue (CqBuffer[2]) = [00000000EE645000]
Aqa.Asqs: 1
Aqa.Acqs: 1
Asq: EE640000
Acq: EE641000h
Cc.En: 1
Cc.Css: 0
Cc.Mps: 0
Cc.Ams: 0
Cc.Shn: 0
FSOpen: Open '\loader\random-seed' Success
FSOpen: Open '\EFI\nixos\0fiqha8cbh712n7ykj1wl74mvd2x5rvi-initrd-linux-6.6.54-initrd.efi' Success
FSOpen: Open '\EFI\nixos\0s68b807ggc41hbb3pbzp78h96p8md8x-linux-6.6.54-Image.efi' Success
FatDiskIo: Cache Page OutBound occurred!
FatDiskIo: Cache Page OutBound occurred!
[Security] 3rd party image[0] can be loaded after EndOfDxe: PcieRoot(0x4)/Pci(0x0,0x0)/Pci(0x0,0x0)/NVMe(0x1,28-CC-A0-41-D2-38-25-00)/HD(1,GPT,6CB0B405-BD4A-4A8F-B084-D070ED13F00D,0x800,0x7F800)/\EFI\nixos\0s68b807ggc41hbb3pbzp78h96p8md8x-linux-6.6.54-ImaLoading driver at 0x000E0C40000 EntryPoint=0x000E395E660
Loading driver at 0x000E0C40000 EntryPoint=0x000E395E660
EFI stub: Booting Linux Kernel...
EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path
EFI stub: Generating empty DTB
EFI stub: Exiting boot services...
XhcClearBiosOwnership: called to clear BIOS ownership
XhcClearBiosOwnership: called to clear BIOS ownership
[ 0.088436] rockchip-pinctrl PRP0001:00: error -ENODEV: device tree node not found
<<< NixOS Stage 1 >>>
loading module btrfs...
loading module dm_mod...
running udev...
Starting systemd-udevd version 255.9
[ 3.306393] cma: cma_alloc: reserved: alloc failed, req-size: 4 pages, ret: -12
[ 3.307056] cma: cma_alloc: reserved: alloc failed, req-size: 16 pages, ret: -12
kbd_mode: KDSKBMODE: Inappropriate ioctl for device
starting device mapper and LVM...
Scanning for Btrfs filesystems
registered: /dev/nvme0n1p2
mounting /dev/disk/by-uuid/fc3f9927-4f3b-497f-99a9-394552745082 on /...
mounting /dev/disk/by-uuid/fc3f9927-4f3b-497f-99a9-394552745082 on /nix...
<<< NixOS Stage 2 >>>
running activation script...
setting up /etc...
starting systemd...
Welcome to NixOS 24.05 (Uakari)!
[ OK ] Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/systemd-fsck.
[ OK ] Created slice User and Session Slice.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
Expecting device /dev/disk/by-uuid/7A7C-DD21...
Expecting device Samsung SSD 980 1TB nixos...
Expecting device /dev/ttyS0...
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Containers.
[ OK ] Reached target Path Units.
[ OK ] Reached target Remote File Systems.
[ OK ] Reached target Slice Units.
[ OK ] Reached target Swaps.
[ OK ] Listening on Process Core Dump Socket.
[ OK ] Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket.
[ OK ] Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
Mounting Huge Pages File System...
Mounting POSIX Message Queue File System...
Mounting Kernel Debug File System...
Starting Create List of Static Device Nodes...
Starting Load Kernel Module configfs...
Starting Load Kernel Module drm...
Starting Load Kernel Module efi_pstore...
Starting Load Kernel Module fuse...
Starting mount-pstore.service...
Starting Create SUID/SGID Wrappers...
Starting Journal Service...
Starting Load Kernel Modules...
Starting Remount Root and Kernel File Systems...
Starting Coldplug All udev Devices...
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Started Journal Service.
[ OK ] Finished Create List of Static Device Nodes.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module efi_pstore.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Create SUID/SGID Wrappers.
[ OK ] Finished Remount Root and Kernel File Systems.
[ OK ] Finished mount-pstore.service.
Mounting FUSE Control File System...
Mounting Kernel Configuration File System...
Starting Firewall...
Starting Flush Journal to Persistent Storage...
Starting Load/Save OS Random Seed...
Starting Apply Kernel Variables...
Starting Create Static Device Nodes in /dev gracefully...
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Mounted FUSE Control File System.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Load/Save OS Random Seed.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create Static Device Nodes in /dev gracefully.
Starting Create Static Device Nodes in /dev...
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Starting Rule-based Manager for Device Events and Files...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device Samsung SSD 980 1TB ESP.
Mounting /home...
Starting File System Check on /dev/disk/by-uuid/7A7C-DD21...
[ OK ] Finished Firewall.
[ OK ] Mounted /home.
[ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ 8.514971] stmmaceth RKCP6543:00: no platform data provided
Starting Virtual Console Setup...
[ OK ] Finished File System Check on /dev/disk/by-uuid/7A7C-DD21.
Mounting /boot...
[ OK ] Finished Virtual Console Setup.
[ OK ] Mounted /boot.
[ OK ] Reached target Bluetooth Support.
[ OK ] Reached target Local File Systems.
Starting Update Boot Loader Random Seed...
Starting Load/Save RF Kill Switch Status...
Starting Create System Files and Directories...
[ OK ] Started Load/Save RF Kill Switch Status.
[ OK ] Finished Update Boot Loader Random Seed.
[ OK ] Finished Create System Files and Directories.
Starting Userspace Out-Of-Memory (OOM) Killer...
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Started Userspace Out-Of-Memory (OOM) Killer.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Started logrotate.timer.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timer Units.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Nix Daemon Socket.
[ OK ] Reached target Socket Units.
[ OK ] Reached target Basic System.
Starting Kernel Auditing...
Starting DHCP Client...
Starting Logrotate configuration check...
Starting Name Service Cache Daemon (nsncd)...
[ OK ] Started Reset console on configuration changes.
Starting resolvconf update...
[ OK ] Started WPA Supplicant instance.
[ OK ] Finished Kernel Auditing.
[ OK ] Started Name Service Cache Daemon (nsncd).
[ OK ] Finished Logrotate configuration check.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
Starting D-Bus System Message Bus...
Starting User Login Management...
[ OK ] Stopped target Host and Network Name Lookups.
Stopping Host and Network Name Lookups...
[ OK ] Stopped target User and Group Name Lookups.
Stopping User and Group Name Lookups...
Stopping Name Service Cache Daemon (nsncd)...
[ OK ] Stopped Name Service Cache Daemon (nsncd).
[ OK ] Started D-Bus System Message Bus.
Starting Name Service Cache Daemon (nsncd)...
[ OK ] Finished resolvconf update.
[ OK ] Started User Login Management.
[ OK ] Started Name Service Cache Daemon (nsncd).
[ OK ] Reached target Preparation for Network.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
[ 10.818144] Bluetooth: hci0: command 0x1001 tx timeout
[ 10.818618] Bluetooth: hci0: RTL: Failed to generate devcoredump
[ 10.818620] Bluetooth: hci0: RTL: HCI_OP_READ_LOCAL_VERSION failed (-110)
[ 10.819736] Bluetooth: hci0: RTL: read local version failed
Starting Networking Setup...
[ OK ] Finished Networking Setup.
Starting Extra networking commands....
[ OK ] Finished Extra networking commands..
[ OK ] Reached target Network.
Starting SSH Daemon...
Starting Permit User Sessions...
[ OK ] Started SSH Daemon.
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
<<< Welcome to NixOS 24.05.5480.6e6b3dd395c3 (aarch64) - ttyS0 >>>
Run 'nixos-help' for the NixOS manual.
NanoPi-NixOS login: