edk2-porting / edk2-rk3588

EDK2 UEFI firmware for Rockchip RK3588 platforms
456 stars 90 forks source link

Corsair Force MP600 SSD not recognized by OS under ACPI #91

Closed soyflourbread closed 12 months ago

soyflourbread commented 12 months ago

Not sure if it's because of MP600 being a PCIe 4.0 drive or some other reason, but a Samsung 970 EVO PCIe 3.0 drive can be recognized successfully under ACPI. On the other hand, MP600 can also be recognized with device tree mode.

Hardware: Rock 5b + Force MP600 Operating System: CoreOS testing (linux 6.5.5), also reproducible on CentOS Stream 9 UEFI: edk2-rk3588 v0.9 (ACPI, no device tree)

mariobalanica commented 12 months ago

Would you be able to provide serial logs if I send some test builds of the firmware?

soyflourbread commented 12 months ago

I don't have a USB to TTL serial cable for now, but I can get one if that's necessary.

mariobalanica commented 12 months ago

It may not be necessary. First of all, does the NVME drive show up in UEFI boot options?

soyflourbread commented 12 months ago

The drive does show up in UEFI. It's only the OS (only tried Linux) that's not recognizing the SSD.

mariobalanica commented 12 months ago

rock-5b-ssd-test1.zip

Can you share the output of the pci command in UEFI Shell with the firmware image above?

NVME won't show up in the boot menu, but it should work in Linux with ACPI now. Please attach dmesg logs if you can too.

soyflourbread commented 12 months ago

CoreOS can indeed recognize the drive now.

dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 6.5.5-300.fc39.aarch64 (mockbuild@959b1746e0784dcdb58143b363973403) (gcc (GCC) 13.2.1 20230918 (Red Hat 13.2.1-3), GNU ld version 2.40-13.fc39) #1 SMP PREEMPT_DYNAMIC Sat Sep 23 23:14:54 UTC 2023
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] efi: EFI v2.7 by EDK II
[    0.000000] efi: SMBIOS=0xeac20000 SMBIOS 3.0=0xeac00000 ACPI 2.0=0xeac30018 MEMATTR=0xef179018 MOKvar=0xe9df0000 MEMRESERVE=0xeab41698 
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000EAC30018 000024 (v02 RKCP  )
[    0.000000] ACPI: XSDT 0x00000000EAC3FE98 000084 (v01 RKCP   RK3588   00000000      01000013)
[    0.000000] ACPI: FACP 0x00000000EAC3FB98 000114 (v06 RKCP   RK3588   00000000 EDK2 00000000)
[    0.000000] ACPI: DSDT 0x00000000EAC37518 000842 (v02 RKCP   RK3588   00000002 INTL 20200925)
[    0.000000] ACPI: DBG2 0x00000000EAC3FA98 00005C (v00 RKCP   RK3588   00000000 EDK2 00000000)
[    0.000000] ACPI: GTDT 0x00000000EAC3FD18 000060 (v02 RKCP   RK3588   00000000 EDK2 00000000)
[    0.000000] ACPI: APIC 0x00000000EAC3E998 0002D4 (v04 RKCP   RK3588   00000000 EDK2 00000000)
[    0.000000] ACPI: MCFG 0x00000000EAC3F818 00007C (v01 RKCP   RK3588   00000000 EDK2 00000000)
[    0.000000] ACPI: PPTT 0x00000000EAC3ED98 000220 (v01 RKCP   RK3588   00000000 EDK2 00000000)
[    0.000000] ACPI: SPCR 0x00000000EAC3FE18 000050 (v02 RKCP   RK3588   00000000 EDK2 00000000)
[    0.000000] ACPI: SSDT 0x00000000EAC3E318 00026B (v05 RKCP   PCIE21L0 00000002 INTL 20200925)
[    0.000000] ACPI: SSDT 0x00000000EAC3F018 00026B (v05 RKCP   PCIE21L2 00000002 INTL 20200925)
[    0.000000] ACPI: SSDT 0x00000000EAC3C798 000269 (v05 RKCP   PCIE34L0 00000002 INTL 20200925)
[    0.000000] ACPI: SSDT 0x00000000EAC3F698 000158 (v05 RKCP   USB2HOST 00000002 INTL 20200925)
[    0.000000] ACPI: BGRT 0x00000000EAC3FF98 000038 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: SPCR: console: uart,mmio32,0xfeb50000
[    0.000000] NUMA: Failed to initialise from firmware
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000003ffffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x3f9edf300-0x3f9ef5fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000003ffffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x00000000001fffff]
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000007bffff]
[    0.000000]   node   0: [mem 0x00000000007c0000-0x00000000007effff]
[    0.000000]   node   0: [mem 0x00000000007f0000-0x00000000083fffff]
[    0.000000]   node   0: [mem 0x0000000008400000-0x00000000093fffff]
[    0.000000]   node   0: [mem 0x0000000009400000-0x00000000e9deffff]
[    0.000000]   node   0: [mem 0x00000000e9df0000-0x00000000e9dfffff]
[    0.000000]   node   0: [mem 0x00000000e9e00000-0x00000000e9edffff]
[    0.000000]   node   0: [mem 0x00000000e9ee0000-0x00000000e9f5ffff]
[    0.000000]   node   0: [mem 0x00000000e9f60000-0x00000000e9f8ffff]
[    0.000000]   node   0: [mem 0x00000000e9f90000-0x00000000ea77ffff]
[    0.000000]   node   0: [mem 0x00000000ea780000-0x00000000ea78cfff]
[    0.000000]   node   0: [mem 0x00000000ea78d000-0x00000000ea7edfff]
[    0.000000]   node   0: [mem 0x00000000ea7ee000-0x00000000eaafffff]
[    0.000000]   node   0: [mem 0x00000000eab00000-0x00000000eab3ffff]
[    0.000000]   node   0: [mem 0x00000000eab40000-0x00000000eab6ffff]
[    0.000000]   node   0: [mem 0x00000000eab70000-0x00000000eac2ffff]
[    0.000000]   node   0: [mem 0x00000000eac30000-0x00000000eac3ffff]
[    0.000000]   node   0: [mem 0x00000000eac40000-0x00000000eafbffff]
[    0.000000]   node   0: [mem 0x00000000eafc0000-0x00000000effaffff]
[    0.000000]   node   0: [mem 0x00000000effb0000-0x00000000effdffff]
[    0.000000]   node   0: [mem 0x00000000effe0000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000003fbffffff]
[    0.000000]   node   0: [mem 0x00000003fc000000-0x00000003fc4fffff]
[    0.000000]   node   0: [mem 0x00000003fc500000-0x00000003ffefffff]
[    0.000000]   node   0: [mem 0x00000003fff00000-0x00000003ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000003ffffffff]
[    0.000000] cma: Reserved 64 MiB at 0x00000000dfe00000
[    0.000000] psci: probing for conduit method from ACPI.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 33 pages/cpu s95528 r8192 d31448 u135168
[    0.000000] pcpu-alloc: s95528 r8192 d31448 u135168 alloc=33*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: BOOT_IMAGE=/images/pxeboot/vmlinuz mitigations=auto,nosmt coreos.liveiso=fedora-coreos-39.20231006.1.0 ignition.firstboot ignition.platform.id=metal
[    0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/images/pxeboot/vmlinuz", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4064256
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 8.
[    0.000000] software IO TLB: mapped [mem 0x00000000dbe00000-0x00000000dfe00000] (64MB)
[    0.000000] Memory: 15895200K/16515072K available (18112K kernel code, 4194K rwdata, 15356K rodata, 10112K init, 10754K bss, 554336K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 60105 entries in 235 pages
[    0.000000] ftrace: allocated 235 pages with 6 groups
[    0.000000] trace event string verifier disabled
[    0.000000] Dynamic Preempt: voluntary
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 480 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000118] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.000342] Console: colour dummy device 80x25
[    0.000928] ACPI: Core revision 20230331
[    0.002454] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.002462] pid_max: default: 32768 minimum: 301
[    0.004895] LSM: initializing lsm=lockdown,capability,yama,selinux,bpf,landlock,integrity
[    0.005929] Yama: becoming mindful.
[    0.005938] SELinux:  Initializing.
[    0.009739] LSM support for eBPF active
[    0.009745] landlock: Up and running.
[    0.010498] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.010523] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.013801] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.013885] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.013946] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[    0.014130] rcu: Hierarchical SRCU implementation.
[    0.014133] rcu:     Max phase no-delay instances is 400.
[    0.014867] Remapping and enabling EFI services.
[    0.015445] smp: Bringing up secondary CPUs ...
[    0.016564] Detected VIPT I-cache on CPU1
[    0.016596] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    0.016620] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.017765] Detected VIPT I-cache on CPU2
[    0.017790] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    0.017808] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.018942] Detected VIPT I-cache on CPU3
[    0.018966] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    0.018983] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020121] CPU features: detected: Spectre-v4
[    0.020123] CPU features: detected: Spectre-BHB
[    0.020125] Detected PIPT I-cache on CPU4
[    0.020136] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    0.020144] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    0.021211] Detected PIPT I-cache on CPU5
[    0.021223] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    0.021231] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    0.022320] Detected PIPT I-cache on CPU6
[    0.022332] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    0.022340] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    0.023444] Detected PIPT I-cache on CPU7
[    0.023456] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    0.023465] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    0.023502] smp: Brought up 1 node, 8 CPUs
[    0.023508] SMP: Total of 8 processors activated.
[    0.023510] CPU features: detected: 32-bit EL0 Support
[    0.023512] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.023515] CPU features: detected: Common not Private translations
[    0.023517] CPU features: detected: CRC32 instructions
[    0.023519] CPU features: detected: Data cache clean to Point of Persistence
[    0.023523] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023525] CPU features: detected: LSE atomic instructions
[    0.023527] CPU features: detected: Privileged Access Never
[    0.023529] CPU features: detected: RAS Extension Support
[    0.023532] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.023584] CPU: All CPU(s) started at EL2
[    0.023586] alternatives: applying system-wide alternatives
[    0.029821] devtmpfs: initialized
[    0.035320] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.035331] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.037048] pinctrl core: initialized pinctrl subsystem
[    0.037416] SMBIOS 3.3.0 present.
[    0.037426] DMI: Radxa ROCK 5 Model B/ROCK 5 Model B, BIOS v0.9 10/11/2023
[    0.038391] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.039006] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.039164] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.039350] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.039974] audit: initializing netlink subsys (disabled)
[    0.040094] audit: type=2000 audit(0.037:1): state=initialized audit_enabled=0 res=1
[    0.040520] thermal_sys: Registered thermal governor 'fair_share'
[    0.040524] thermal_sys: Registered thermal governor 'step_wise'
[    0.040526] thermal_sys: Registered thermal governor 'user_space'
[    0.040554] cpuidle: using governor menu
[    0.040686] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.040784] ASID allocator initialised with 65536 entries
[    0.040963] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.041589] Serial: AMBA PL011 UART driver
[    0.042424] Modules: 18080 pages in range for non-PLT usage
[    0.042427] Modules: 509600 pages in range for PLT usage
[    0.043021] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.043023] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.043024] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.043025] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.043026] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.043027] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.043028] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.043029] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.043732] cryptd: max_cpu_qlen set to 1000
[    0.044385] raid6: skipped pq benchmark and selected neonx8
[    0.044386] raid6: using neon recovery algorithm
[    0.044636] ACPI: Added _OSI(Module Device)
[    0.044637] ACPI: Added _OSI(Processor Device)
[    0.044638] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044639] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044965] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.045147] ACPI: Interpreter enabled
[    0.045149] ACPI: Using GIC for interrupt routing
[    0.045193] ACPI: MCFG table detected, 5 entries
[    0.046904] ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 01])
[    0.046909] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.046953] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR DPC]
[    0.047013] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.047129] acpi PNP0A08:00: ECAM area [mem 0x980108000-0x980207fff] reserved by PNP0C02:00
[    0.047142] acpi PNP0A08:00: ECAM at [mem 0x980108000-0x980207fff] for [bus 01]
[    0.047155] ACPI: Remapped I/O 0x00000009bfff0000 to [io  0x0000-0xffff window]
[    0.047189] PCI host bridge to bus 0002:01
[    0.047190] pci_bus 0002:01: root bus resource [mem 0xf2000000-0xf2ffffff window]
[    0.047191] pci_bus 0002:01: root bus resource [mem 0x990000000-0x9bffeffff window]
[    0.047193] pci_bus 0002:01: root bus resource [io  0x0000-0xffff window]
[    0.047195] pci_bus 0002:01: root bus resource [bus 01]
[    1.686131] pci_bus 0002:01: resource 4 [mem 0xf2000000-0xf2ffffff window]
[    1.686133] pci_bus 0002:01: resource 5 [mem 0x990000000-0x9bffeffff window]
[    1.686135] pci_bus 0002:01: resource 6 [io  0x0000-0xffff window]
[    1.686173] ACPI: PCI Root Bridge [PCI4] (domain 0004 [bus 01])
[    1.686176] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    1.686212] acpi PNP0A08:01: _OSC: platform does not support [PCIeHotplug LTR DPC]
[    1.686271] acpi PNP0A08:01: _OSC: OS now controls [PME AER PCIeCapability]
[    1.686393] acpi PNP0A08:01: ECAM area [mem 0xa00108000-0xa00207fff] reserved by PNP0C02:01
[    1.686403] acpi PNP0A08:01: ECAM at [mem 0xa00108000-0xa00207fff] for [bus 01]
[    1.686413] ACPI: Remapped I/O 0x0000000a3fff0000 to [io  0x10000-0x1ffff window]
[    1.686439] PCI host bridge to bus 0004:01
[    1.686440] pci_bus 0004:01: root bus resource [mem 0xf4000000-0xf4ffffff window]
[    1.686442] pci_bus 0004:01: root bus resource [mem 0xa10000000-0xa3ffeffff window]
[    1.686444] pci_bus 0004:01: root bus resource [io  0x10000-0x1ffff window] (bus address [0x0000-0xffff])
[    1.686446] pci_bus 0004:01: root bus resource [bus 01]
[    1.686468] pci 0004:01:00.0: [10ec:8125] type 00 class 0x020000
[    1.686484] pci 0004:01:00.0: reg 0x10: [io  0x10000-0x100ff]
[    1.686505] pci 0004:01:00.0: reg 0x18: [mem 0xf4000000-0xf400ffff 64bit]
[    1.686518] pci 0004:01:00.0: reg 0x20: [mem 0xf4010000-0xf4013fff 64bit]
[    1.686616] pci 0004:01:00.0: supports D1 D2
[    1.686617] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.686887] pci 0004:01:1f.0: [e000:684c] type 7f class 0xffffff
[    1.686910] pci 0004:01:1f.0: unknown header type 7f, ignoring device
[    1.686923] pci 0004:01:00.0: BAR 2: assigned [mem 0xa10000000-0xa1000ffff 64bit]
[    1.686933] pci 0004:01:00.0: BAR 4: assigned [mem 0xa10010000-0xa10013fff 64bit]
[    1.686943] pci 0004:01:00.0: BAR 0: assigned [io  0x10000-0x100ff]
[    1.686947] pci_bus 0004:01: resource 4 [mem 0xf4000000-0xf4ffffff window]
[    1.686948] pci_bus 0004:01: resource 5 [mem 0xa10000000-0xa3ffeffff window]
[    1.686950] pci_bus 0004:01: resource 6 [io  0x10000-0x1ffff window]
[    1.686983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 01])
[    1.686986] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    1.687021] acpi PNP0A08:02: _OSC: platform does not support [PCIeHotplug LTR DPC]
[    1.687080] acpi PNP0A08:02: _OSC: OS now controls [PME AER PCIeCapability]
[    1.687214] acpi PNP0A08:02: ECAM area [mem 0x900100000-0x9001fffff] reserved by PNP0C02:02
[    1.687224] acpi PNP0A08:02: ECAM at [mem 0x900100000-0x9001fffff] for [bus 01]
[    1.687237] ACPI: Remapped I/O 0x000000093fff0000 to [io  0x20000-0x2ffff window]
[    1.687263] PCI host bridge to bus 0000:01
[    1.687264] pci_bus 0000:01: root bus resource [mem 0xf0000000-0xf0ffffff window]
[    1.687265] pci_bus 0000:01: root bus resource [mem 0x910000000-0x93ffeffff window]
[    1.687267] pci_bus 0000:01: root bus resource [io  0x20000-0x2ffff window] (bus address [0x0000-0xffff])
[    1.687269] pci_bus 0000:01: root bus resource [bus 01]
[    1.687282] pci 0000:01:00.0: [1987:5016] type 00 class 0x010802
[    1.687295] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0003fff 64bit]
[    1.687442] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:01:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
[    1.687540] pci 0000:01:00.0: BAR 0: assigned [mem 0x910000000-0x910003fff 64bit]
[    1.687547] pci_bus 0000:01: resource 4 [mem 0xf0000000-0xf0ffffff window]
[    1.687549] pci_bus 0000:01: resource 5 [mem 0x910000000-0x93ffeffff window]
[    1.687550] pci_bus 0000:01: resource 6 [io  0x20000-0x2ffff window]
[    1.687754] iommu: Default domain type: Translated
[    1.687755] iommu: DMA domain TLB invalidation policy: lazy mode
[    1.687937] SCSI subsystem initialized
[    1.687970] libata version 3.00 loaded.
[    1.687997] ACPI: bus type USB registered
[    1.688007] usbcore: registered new interface driver usbfs
[    1.688014] usbcore: registered new interface driver hub
[    1.688020] usbcore: registered new device driver usb
[    1.688047] pps_core: LinuxPPS API ver. 1 registered
[    1.688048] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    1.688050] PTP clock support registered
[    1.688113] EDAC MC: Ver: 3.0.0
[    1.688207] scmi_core: SCMI protocol bus registered
[    1.688243] efivars: Registered efivars operations
[    1.688508] NetLabel: Initializing
[    1.688509] NetLabel:  domain hash size = 128
[    1.688509] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.688523] NetLabel:  unlabeled traffic allowed by default
[    1.688526] mctp: management component transport protocol core
[    1.688528] NET: Registered PF_MCTP protocol family
[    1.688640] vgaarb: loaded
[    1.688748] clocksource: Switched to clocksource arch_sys_counter
[    1.689576] VFS: Disk quotas dquot_6.6.0
[    1.689634] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.689752] pnp: PnP ACPI init
[    1.689860] system 00:00: [mem 0x980000000-0x98fffffff window] could not be reserved
[    1.689864] system 00:00: [mem 0xa40800000-0xa40bfffff window] has been reserved
[    1.689888] system 00:01: [mem 0xa00000000-0xa0fffffff window] could not be reserved
[    1.689890] system 00:01: [mem 0xa41000000-0xa413fffff window] has been reserved
[    1.689914] system 00:02: [mem 0x900000000-0x90fffffff window] could not be reserved
[    1.689916] system 00:02: [mem 0xa40000000-0xa403fffff window] has been reserved
[    1.689924] pnp: PnP ACPI: found 3 devices
[    1.693096] NET: Registered PF_INET protocol family
[    1.693220] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    1.696560] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    1.696606] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.696764] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.697101] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.697777] TCP: Hash tables configured (established 131072 bind 65536)
[    1.697927] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
[    1.698019] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    1.698142] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    1.698511] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.698524] NET: Registered PF_XDP protocol family
[    1.698533] PCI: CLS 0 bytes, default 64
[    1.698544] ACPI: bus type thunderbolt registered
[    1.698660] Trying to unpack rootfs image as initramfs...
[    1.706414] kvm [1]: IPA Size Limit: 40 bits
[    1.706433] kvm [1]: GICv3: no GICV resource entry
[    1.706436] kvm [1]: disabling GICv2 emulation
[    1.706450] kvm [1]: GIC system register CPU interface enabled
[    1.706465] kvm [1]: vgic interrupt IRQ9
[    1.706486] kvm [1]: VHE mode initialized successfully
[    1.736988] Initialise system trusted keyrings
[    1.737031] Key type blacklist registered
[    1.737099] workingset: timestamp_bits=37 max_order=22 bucket_order=0
[    1.737140] zbud: loaded
[    1.740661] integrity: Platform Keyring initialized
[    1.740669] integrity: Machine keyring initialized
[    1.747179] jitterentropy: Initialization failed with host not compliant with requirements: 9
[    1.747183] NET: Registered PF_ALG protocol family
[    1.747187] xor: measuring software checksum speed
[    1.747818]    8regs           : 15691 MB/sec
[    1.748452]    32regs          : 15560 MB/sec
[    1.748917]    arm64_neon      : 21318 MB/sec
[    1.748917] xor: using function: arm64_neon (21318 MB/sec)
[    1.748921] Key type asymmetric registered
[    1.748922] Asymmetric key parser 'x509' registered
[    2.235686] Freeing initrd memory: 71864K
[    2.247579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    2.247647] io scheduler mq-deadline registered
[    2.247648] io scheduler kyber registered
[    2.247730] io scheduler bfq registered
[    2.250354] atomic64_test: passed
[    2.252004] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.254503] HISI0031:00: ttyS0 at MMIO 0xfeb50000 (irq = 15, base_baud = 1500000) is a 16550A
[    2.254516] printk: console [ttyS0] enabled
[    2.436335] msm_serial: driver initialized
[    2.436888] ACPI: bus type drm_connector registered
[    2.437555] [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
[    2.439586] fbcon: Deferring console take-over
[    2.439979] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
[    2.442115] usbcore: registered new interface driver usbserial_generic
[    2.442687] usbserial: USB Serial support registered for generic
[    2.443268] mousedev: PS/2 mouse device common for all mice
[    2.445884] rtc-efi rtc-efi.0: registered as rtc0
[    2.447280] rtc-efi rtc-efi.0: setting system clock to 2000-01-01T00:00:00 UTC (946684800)
[    2.448117] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    2.449200] device-mapper: uevent: version 1.0.3
[    2.449789] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.450973] ledtrig-cpu: registered to indicate activity on CPUs
[    2.451610] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    2.452216] hid: raw HID events driver (C) Jiri Kosina
[    2.452684] usbcore: registered new interface driver usbhid
[    2.453169] usbhid: USB HID core driver
[    2.453747] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
[    2.454541] hw perfevents: enabled with armv8_pmuv3_1 PMU driver, 7 counters available
[    2.455378] drop_monitor: Initializing network drop monitor service
[    2.470610] Initializing XFRM netlink socket
[    2.471262] NET: Registered PF_INET6 protocol family
[    2.482721] Segment Routing with IPv6
[    2.483044] RPL Segment Routing with IPv6
[    2.483402] In-situ OAM (IOAM) with IPv6
[    2.483765] mip6: Mobile IPv6
[    2.484026] NET: Registered PF_PACKET protocol family
[    2.486325] registered taskstats version 1
[    2.486987] Loading compiled-in X.509 certificates
[    2.512997] Loaded X.509 cert 'Fedora kernel signing key: 10336546cb60178352b3b7dc55d9a9e4614988c1'
[    2.516825] page_owner is disabled
[    2.517252] Key type .fscrypt registered
[    2.517594] Key type fscrypt-provisioning registered
[    2.519708] Btrfs loaded, zoned=yes, fsverity=yes
[    2.520139] Key type big_key registered
[    2.520858] Key type encrypted registered
[    2.521296] ima: secureboot mode disabled
[    2.521647] ima: No TPM chip found, activating TPM-bypass!
[    2.522128] Loading compiled-in module X.509 certificates
[    2.523273] Loaded X.509 cert 'Fedora kernel signing key: 10336546cb60178352b3b7dc55d9a9e4614988c1'
[    2.524060] ima: Allocated hash algorithm: sha256
[    2.524478] ima: No architecture policies found
[    2.524883] evm: Initialising EVM extended attributes:
[    2.525329] evm: security.selinux
[    2.525618] evm: security.SMACK64 (disabled)
[    2.525990] evm: security.SMACK64EXEC (disabled)
[    2.526391] evm: security.SMACK64TRANSMUTE (disabled)
[    2.526830] evm: security.SMACK64MMAP (disabled)
[    2.527230] evm: security.apparmor (disabled)
[    2.527607] evm: security.ima
[    2.527866] evm: security.capability
[    2.528177] evm: HMAC attrs: 0x1
[    2.587990] DRBG: Continuing without Jitter RNG
[    2.602952] alg: No test for 842 (842-scomp)
[    2.603394] alg: No test for 842 (842-generic)
[    2.974334] clk: Disabling unused clocks
[    2.974748] dw-apb-uart HISI0031:00: forbid DMA for kernel console
[    2.977814] Freeing unused kernel memory: 10112K
[    3.021976] Checked W+X mappings: passed, no W+X pages found
[    3.022475] Run /init as init process
[    3.022797]   with arguments:
[    3.022799]     /init
[    3.022800]   with environment:
[    3.022801]     HOME=/
[    3.022802]     TERM=linux
[    3.022803]     BOOT_IMAGE=/images/pxeboot/vmlinuz
[    3.039312] systemd[1]: System time before build time, advancing clock.
[    3.055162] systemd[1]: systemd 254.5-2.fc39 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP -GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    3.057995] systemd[1]: Detected architecture arm64.
[    3.058439] systemd[1]: Running in initrd.
[    3.062933] systemd[1]: No hostname configured, using default hostname.
[    3.063942] systemd[1]: Hostname set to .
[    3.064627] systemd[1]: Initializing machine ID from random generator.
[    3.341575] systemd[1]: bpf-lsm: LSM BPF program attached
[    3.431609] Input 'dev/disk/by-label/fedora-coreos-39.20231006.1.0' is not an absolute file system path, escaping is likely not going to be reversible.
[    3.709560] systemd[1]: Queued start job for default target initrd.target.
[    3.726797] systemd[1]: Started clevis-luks-askpass.path - Forward Password Requests to Clevis Directory Watch.
[    3.731096] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[    3.734912] systemd[1]: Reached target cryptsetup-pre.target - Local Encrypted Volumes (Pre).
[    3.738835] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[    3.742890] systemd[1]: Reached target initrd-usr-fs.target - Initrd /usr File System.
[    3.746864] systemd[1]: Reached target paths.target - Path Units.
[    3.750890] systemd[1]: Reached target slices.target - Slice Units.
[    3.754858] systemd[1]: Reached target swap.target - Swaps.
[    3.758845] systemd[1]: Reached target timers.target - Timer Units.
[    3.763278] systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
[    3.767095] systemd[1]: Listening on iscsid.socket - Open-iSCSI iscsid Socket.
[    3.771088] systemd[1]: Listening on iscsiuio.socket - Open-iSCSI iscsiuio Socket.
[    3.775385] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    3.780419] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[    3.784463] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    3.789296] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    3.792860] systemd[1]: Reached target sockets.target - Socket Units.
[    3.813904] systemd[1]: Mounting run-ephemeral_base.mount - /run/ephemeral_base...
[    3.820987] systemd[1]: Starting afterburn-network-kargs.service - Afterburn Initrd Setup Network Kernel Arguments...
[    3.824880] systemd[1]: coreos-check-kernel.service - Check That Initrd Matches Kernel was skipped because of an unmet condition check (ConditionPathIsDirectory=!/usr/lib/modules/6.5.5-300.fc39.aarch64).
[    3.829890] systemd[1]: Starting coreos-ignition-setup-user.service - CoreOS Ignition User Config Setup...
[    3.835057] systemd[1]: coreos-secex-ignition-decrypt.service - CoreOS Secex Ignition Config Decryptor was skipped because of an unmet condition check (ConditionPathExists=/run/coreos/secure-execution).
[    3.860857] systemd[1]: Finished coreos-teardown-initramfs.service - CoreOS Tear Down Initramfs.
[    3.885103] systemd[1]: Starting coreos-touch-run-agetty.service - CoreOS: Touch /run/agetty.reload...
[    3.889132] systemd[1]: ignition-ostree-growfs.service - Ignition OSTree: Grow Root Filesystem was skipped because of an unmet condition check (ConditionPathExists=!/run/ostree-live).
[    3.894358] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    3.913091] systemd[1]: Starting systemd-journald.service - Journal Service...
[    3.921926] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    3.930178] systemd[1]: Starting systemd-sysusers.service - Create System Users...
[    3.938229] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
[    3.940842] systemd[1]: Mounted run-ephemeral_base.mount - /run/ephemeral_base.
[    3.951624] systemd-journald[312]: Collecting audit messages is disabled.
[    3.957935] systemd[1]: Finished afterburn-network-kargs.service - Afterburn Initrd Setup Network Kernel Arguments.
[    3.967514] fuse: init (API version 7.38)
[    3.972201] systemd[1]: Finished coreos-ignition-setup-user.service - CoreOS Ignition User Config Setup.
[    3.988351] alua: device handler registered
[    3.990970] systemd[1]: Finished coreos-touch-run-agetty.service - CoreOS: Touch /run/agetty.reload.
[    3.991954] emc: device handler registered
[    3.996086] rdac: device handler registered
[    4.010899] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    4.017063] systemd-sysusers[314]: Creating group 'root' with GID 0.
[    4.018330] systemd-sysusers[314]: Creating group 'nobody' with GID 65534.
[    4.020051] systemd-modules-load[313]: Inserted module 'fuse'
[    4.021236] coreos-ignition-setup-user[307]: File /config.ign does not exist.. Skipping copy
[    4.022213] systemd-modules-load[313]: Inserted module 'dm_multipath'
[    4.023358] systemd-modules-load[313]: Inserted module 'ip_tables'
[    4.024470] systemd-modules-load[313]: Inserted module 'ip6_tables'
[    4.025566] systemd-modules-load[313]: Inserted module 'scsi_dh_alua'
[    4.026820] systemd-modules-load[313]: Inserted module 'scsi_dh_emc'
[    4.027771] systemd-modules-load[313]: Inserted module 'scsi_dh_rdac'
[    4.035910] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[    4.040937] systemd[1]: Started systemd-journald.service - Journal Service.
[    4.060462] systemd[1]: Finished systemd-vconsole-setup.service - Virtual Console Setup.
[    4.083057] systemd[1]: Starting dracut-cmdline-ask.service - dracut ask for additional cmdline parameters...
[    4.084535] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[    4.085599] systemd-sysusers[314]: Creating group 'users' with GID 100.
[    4.089289] systemd-sysusers[314]: Creating group 'dbus' with GID 81.
[    4.093574] systemd-sysusers[314]: Creating user 'dbus' (System Message Bus) with UID 81 and GID 81.
[    4.106104] systemd[1]: Finished systemd-sysusers.service - Create System Users.
[    4.117094] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
[    4.122061] systemd[1]: Starting systemd-tmpfiles-setup.service - Create Volatile Files and Directories...
[    4.139970] systemd[1]: Finished dracut-cmdline-ask.service - dracut ask for additional cmdline parameters.
[    4.156986] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
[    4.173979] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
[    4.191954] systemd[1]: Finished systemd-tmpfiles-setup.service - Create Volatile Files and Directories.
[    4.206992] systemd[1]: Starting dracut-cmdline.service - dracut cmdline hook...
[    4.212021] systemd[1]: Starting sysroot-xfs-ephemeral-mkfs.service...
[    4.238569] dracut-cmdline[361]: dracut-39.20231006.1.0 (CoreOS Prerelease) dracut-059-12.fc39
[    4.246841] dracut-cmdline[361]: Using kernel command line parameters:  rd.driver.pre=btrfs ip=auto rd.driver.pre=scsi_dh_alua rd.driver.pre=scsi_dh_emc rd.driver.pre=scsi_dh_rdac rd.driver.pre=dm_multipath   BOOT_IMAGE=/images/pxeboot/vmlinuz mitigations=auto,nosmt coreos.liveiso=fedora-coreos-39.20231006.1.0 ignition.firstboot ignition.platform.id=metal
[    4.447865] Loading iSCSI transport class v2.0-870.
[    4.457226] iscsi: registered transport (tcp)
[    4.502117] iscsi: registered transport (qla4xxx)
[    4.502584] QLogic iSCSI HBA Driver
[    4.516868] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[    4.545423] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015)
[    4.546026] iscsi: registered transport (cxgb3i)
[    4.622692] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015)
[    4.623321] iscsi: registered transport (cxgb4i)
[    4.623727] cxgb4i:cxgb4i_init_module: cxgb4i dcb enabled.
[    4.641541] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    4.651451] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[    4.652123] iscsi: registered transport (bnx2i)
[    4.660337] iscsi: registered transport (be2iscsi)
[    4.660759] In beiscsi_module_init, tt=(____ptrval____)
[    4.750959] systemd[1]: Finished dracut-cmdline.service - dracut cmdline hook.
[    4.771190] systemd[1]: Starting dracut-pre-udev.service - dracut pre-udev hook...
[    4.899953] systemd[1]: Finished dracut-pre-udev.service - dracut pre-udev hook.
[    4.916993] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
[    4.965169] systemd-udevd[537]: Using default interface naming scheme 'v253'.
[    4.993868] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
[    5.010208] systemd[1]: Starting dracut-pre-trigger.service - dracut pre-trigger hook...
[    5.046942] dracut-pre-trigger[549]: rd.md=0: removing MD RAID activation
[    5.129611] systemd[1]: Finished dracut-pre-trigger.service - dracut pre-trigger hook.
[    5.144986] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    5.897458] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    5.911162] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    5.915877] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[    5.932358] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[    5.950481] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
[    6.018793] xhci-hcd PNP0D10:00: xHCI Host Controller
[    6.018809] ehci-platform PNP0D20:01: EHCI Host Controller
[    6.019164] ehci-platform PNP0D20:00: EHCI Host Controller
[    6.019269] ehci-platform PNP0D20:00: new USB bus registered, assigned bus number 1
[    6.019340] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2
[    6.019452] xhci-hcd PNP0D10:00: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000000000010
[    6.019493] xhci-hcd PNP0D10:00: irq 18, io mem 0xfc000000
[    6.019645] xhci-hcd PNP0D10:00: xHCI Host Controller
[    6.019817] ehci-platform PNP0D20:01: new USB bus registered, assigned bus number 4
[    6.020242] ehci-platform PNP0D20:00: irq 21, io mem 0xfc800000
[    6.020963] ehci-platform PNP0D20:01: irq 22, io mem 0xfc880000
[    6.021282] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 3
[    6.021291] xhci-hcd PNP0D10:00: Host supports USB 3.0 SuperSpeed
[    6.021408] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    6.021414] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.021418] usb usb2: Product: xHCI Host Controller
[    6.021422] usb usb2: Manufacturer: Linux 6.5.5-300.fc39.aarch64 xhci-hcd
[    6.021425] usb usb2: SerialNumber: PNP0D10:00
[    6.021890] hub 2-0:1.0: USB hub found
[    6.022538] ohci-platform PRP0001:00: Generic Platform OHCI controller
[    6.022776] hub 2-0:1.0: 1 port detected
[    6.024185] ohci-platform PRP0001:01: Generic Platform OHCI controller
[    6.024713] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.028760] ehci-platform PNP0D20:00: USB 2.0 started, EHCI 1.00
[    6.030453] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    6.032615] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.033254] usb usb3: Product: xHCI Host Controller
[    6.033682] usb usb3: Manufacturer: Linux 6.5.5-300.fc39.aarch64 xhci-hcd
[    6.034282] usb usb3: SerialNumber: PNP0D10:00
[    6.035117] ------------[ cut here ]------------
[    6.035521] WARNING: CPU: 5 PID: 602 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x40/0x58
[    6.036304] Modules linked in: r8169(+) nvme_common ohci_platform ohci_hcd ehci_platform xhci_plat_hcd(+) be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls cxgb3i cxgb3 mdio libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_dh_rdac scsi_dh_emc scsi_dh_alua ip6_tables ip_tables dm_multipath fuse
[    6.038894] CPU: 5 PID: 602 Comm: (udev-worker) Not tainted 6.5.5-300.fc39.aarch64 #1
[    6.039574] Hardware name: Radxa ROCK 5 Model B/ROCK 5 Model B, BIOS v0.9 10/11/2023
[    6.040244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.040849] pc : pci_msi_setup_msi_irqs+0x40/0x58
[    6.041260] lr : msix_capability_init+0x208/0x318
[    6.041670] sp : ffff8000849833b0
[    6.041755] ehci-platform PNP0D20:01: USB 2.0 started, EHCI 1.00
[    6.041958] x29: ffff8000849833c0 x28: 0000000000000000 x27: 0000000000000064
[    6.043099] x26: ffff000100c3a0d0 x25: ffff000100c3a800 x24: 0000000000000000
[    6.043719] x23: 0000000000000001 x22: 000000000000001f x21: 0000000000000000
[    6.044339] x20: 0000000000000000 x19: ffff000100c3a000 x18: 0000000000000000
[    6.044959] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[    6.045579] x14: 0140000000000000 x13: 0100000000000041 x12: 000080098bd0c000
[    6.046198] x11: 0000000000000001 x10: ffff800084504000 x9 : ffff800080acef18
[    6.046819] x8 : ffff0001109ca900 x7 : 0000000000000000 x6 : ffff800084983200
[    6.047439] x5 : 0000000000000030 x4 : 0000000000000000 x3 : 0000000000000000
[    6.048059] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000100c3a0d0
[    6.048680] Call trace:
[    6.048893]  pci_msi_setup_msi_irqs+0x40/0x58
[    6.049273]  __pci_enable_msix_range+0x228/0x300
[    6.049675]  pci_alloc_irq_vectors_affinity+0xcc/0x158
[    6.050123]  pci_alloc_irq_vectors+0x1c/0x30
[    6.050495]  rtl_init_one+0x3b0/0xb30 [r8169]
[    6.050885]  local_pci_probe+0x48/0xb8
[    6.051213]  pci_call_probe+0x5c/0x1b0
[    6.051541]  pci_device_probe+0x88/0x108
[    6.051884]  really_probe+0x190/0x3d8
[    6.052205]  __driver_probe_device+0x84/0x180
[    6.052584]  driver_probe_device+0x44/0x120
[    6.052949]  __driver_attach+0xf8/0x208
[    6.053284]  bus_for_each_dev+0x84/0xf0
[    6.053619]  driver_attach+0x2c/0x40
[    6.053931]  bus_add_driver+0x11c/0x238
[    6.054266]  driver_register+0x64/0x138
[    6.054602]  __pci_register_driver+0x54/0x68
[    6.054974]  rtl8169_pci_driver_init+0x30/0xff8 [r8169]
[    6.055436]  do_one_initcall+0x60/0x310
[    6.055771]  do_init_module+0x60/0x218
[    6.056099]  load_module+0x798/0x890
[    6.056410]  __do_sys_init_module+0x140/0x168
[    6.056789]  __arm64_sys_init_module+0x24/0x38
[    6.057176]  invoke_syscall+0x78/0x100
[    6.057197] hub 3-0:1.0: USB hub found
[    6.057503]  el0_svc_common.constprop.0+0xcc/0xf8
[    6.057505]  do_el0_svc+0x34/0x50
[    6.058323] hub 3-0:1.0: 1 port detected
[    6.058524]  el0_svc+0x34/0x108
[    6.059032] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    6.059137]  el0t_64_sync_handler+0x120/0x130
[    6.059155] ohci-platform PRP0001:00: new USB bus registered, assigned bus number 5
[    6.059243] ohci-platform PRP0001:00: irq 16, io mem 0xfc840000
[    6.059857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.060230]  el0t_64_sync+0x194/0x198
[    6.060894] usb usb1: Product: EHCI Host Controller
[    6.061406] ---[ end trace 0000000000000000 ]---
[    6.062034] usb usb1: Manufacturer: Linux 6.5.5-300.fc39.aarch64 ehci_hcd
[    6.062364] ------------[ cut here ]------------
[    6.062773] usb usb1: SerialNumber: PNP0D20:00
[    6.063171] WARNING: CPU: 5 PID: 602 at drivers/pci/msi/msi.h:127 pci_msi_teardown_msi_irqs+0x28/0x68
[    6.064070] hub 1-0:1.0: USB hub found
[    6.064158] Modules linked in: r8169(+) nvme_common ohci_platform
[    6.064332] xhci-hcd PNP0D10:01: xHCI Host Controller
[    6.064566] hub 1-0:1.0: 1 port detected
[    6.065343]  ohci_hcd ehci_platform xhci_plat_hcd(+) be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls cxgb3i cxgb3 mdio libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_dh_rdac scsi_dh_emc scsi_dh_alua ip6_tables ip_tables dm_multipath fuse
[    6.065357] CPU: 5 PID: 602 Comm: (udev-worker) Tainted: G        W          6.5.5-300.fc39.aarch64 #1
[    6.067310] ohci-platform PRP0001:01: new USB bus registered, assigned bus number 6
[    6.067317] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    6.067324] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.067328] usb usb4: Product: EHCI Host Controller
[    6.067331] usb usb4: Manufacturer: Linux 6.5.5-300.fc39.aarch64 ehci_hcd
[    6.067335] usb usb4: SerialNumber: PNP0D20:01
[    6.069010] hub 4-0:1.0: USB hub found
[    6.069037] hub 4-0:1.0: 1 port detected
[    6.069147] Hardware name: Radxa ROCK 5 Model B/ROCK 5 Model B, BIOS v0.9 10/11/2023
[    6.069148] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    6.069150] pc : pci_msi_teardown_msi_irqs+0x28/0x68
[    6.069153] lr : msix_capability_init+0x15c/0x318
[    6.069155] sp : ffff8000849833a0
[    6.069156] x29: ffff8000849833a0 x28: 0000000000000000 x27: 0000000000000064
[    6.069158] x26: ffff000100c3a0d0 x25: ffff000100c3a800 x24: 0000000000000000
[    6.070190] ohci-platform PRP0001:01: irq 17, io mem 0xfc8c0000
[    6.070629] x23: 0000000000000001 x22: 000000000000001f x21: 00000000ffffffed
[    6.070734] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 7
[    6.070858] xhci-hcd PNP0D10:01: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000000000010
[    6.070882] xhci-hcd PNP0D10:01: irq 19, io mem 0xfc400000
[    6.071042] xhci-hcd PNP0D10:01: xHCI Host Controller
[    6.072142] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 8
[    6.072392] x20: 0000000000000000 x19: ffff000100c3a000 x18: 0000000000000000
[    6.072395] x17: 0000000000000000
[    6.072997] xhci-hcd PNP0D10:01: Host supports USB 3.0 SuperSpeed
[    6.073368]  x16: 0000000000000000 x15: 0000000000000000
[    6.073805] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    6.074034] x14: 0140000000000000 x13: 0100000000000041 x12: 000080098bd0c000
[    6.074708] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    6.075309] x11: 0000000000000001 x10: ffff800084504000 x9 : ffff800080acee6c
[    6.075311] x8 : ffff0001109ca900 x7 : 0000000000000000 x6 : ffff800084983200
[    6.075314] x5 : 0000000000000030 x4 : 0000000000000000 x3 : 0000000000000000
[    6.075316] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff000100c3a0d0
[    6.075753] usb usb7: Product: xHCI Host Controller

[    6.076155] Call trace:
[    6.076156]  pci_msi_teardown_msi_irqs+0x28/0x68
[    6.076444] usb usb7: Manufacturer: Linux 6.5.5-300.fc39.aarch64 xhci-hcd
[    6.077061]  msix_capability_init+0x15c/0x318
[    6.077063]  __pci_enable_msix_range+0x228/0x300
[    6.077066]  pci_alloc_irq_vectors_affinity+0xcc/0x158
[    6.077068]  pci_alloc_irq_vectors+0x1c/0x30
[    6.077070]  rtl_init_one+0x3b0/0xb30 [r8169]
[    6.077692] usb usb7: SerialNumber: PNP0D10:01
[    6.078202]  local_pci_probe+0x48/0xb8
[    6.078205]  pci_call_probe+0x5c/0x1b0
[    6.078208]  pci_device_probe+0x88/0x108
[    6.080071] hub 7-0:1.0: USB hub found
[    6.080228]  really_probe+0x190/0x3d8
[    6.080231]  __driver_probe_device+0x84/0x180
[    6.080727] hub 7-0:1.0: 1 port detected
[    6.081142]  driver_probe_device+0x44/0x120
[    6.081145]  __driver_attach+0xf8/0x208
[    6.081148]  bus_for_each_dev+0x84/0xf0
[    6.081150]  driver_attach+0x2c/0x40
[    6.081152]  bus_add_driver+0x11c/0x238
[    6.081155]  driver_register+0x64/0x138
[    6.082086] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.082398]  __pci_register_driver+0x54/0x68
[    6.082401]  rtl8169_pci_driver_init+0x30/0xff8 [r8169]
[    6.084147] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    6.084391]  do_one_initcall+0x60/0x310
[    6.084393]  do_init_module+0x60/0x218
[    6.085022] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.085635]  load_module+0x798/0x890
[    6.085774] usb usb8: Product: xHCI Host Controller
[    6.086384]  __do_sys_init_module+0x140/0x168
[    6.087011] usb usb8: Manufacturer: Linux 6.5.5-300.fc39.aarch64 xhci-hcd
[    6.087621]  __arm64_sys_init_module+0x24/0x38
[    6.088247] usb usb8: SerialNumber: PNP0D10:01
[    6.088662]  invoke_syscall+0x78/0x100
[    6.090569] hub 8-0:1.0: USB hub found
[    6.090769]  el0_svc_common.constprop.0+0xcc/0xf8
[    6.090770]  do_el0_svc+0x34/0x50
[    6.090772]  el0_svc+0x34/0x108
[    6.090774]  el0t_64_sync_handler+0x120/0x130
[    6.090776]  el0t_64_sync+0x194/0x198
[    6.090778] ---[ end trace 0000000000000000 ]---
[    6.095242] r8169 0004:01:00.0 eth0: RTL8125B, 00:e0:4c:68:00:4f, XID 641, IRQ 24
[    6.095506] hub 8-0:1.0: 1 port detected
[    6.095812] r8169 0004:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    6.107230] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[    6.107919] xhci-hcd PNP0D10:02: xHCI Host Controller
[    6.108732] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 9
[    6.110017] xhci-hcd PNP0D10:02: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000000000010
[    6.110862] xhci-hcd PNP0D10:02: irq 20, io mem 0xfcd00000
[    6.111475] xhci-hcd PNP0D10:02: xHCI Host Controller
[    6.112048] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 10
[    6.112693] xhci-hcd PNP0D10:02: Host supports USB 3.0 SuperSpeed
[    6.113336] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[    6.114073] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.114705] usb usb9: Product: xHCI Host Controller
[    6.115141] usb usb9: Manufacturer: Linux 6.5.5-300.fc39.aarch64 xhci-hcd
[    6.115695] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization...
[    6.115734] usb usb9: SerialNumber: PNP0D10:02
[    6.117377] hub 9-0:1.0: USB hub found
[    6.117936] hub 9-0:1.0: 1 port detected
[    6.118760] usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.119554] usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
[    6.120294] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.120942] usb usb10: Product: xHCI Host Controller
[    6.121377] usb usb10: Manufacturer: Linux 6.5.5-300.fc39.aarch64 xhci-hcd
[    6.121985] usb usb10: SerialNumber: PNP0D10:02
[    6.122671] hub 10-0:1.0: USB hub found
[    6.122884] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[    6.123044] hub 10-0:1.0: 1 port detected
[    6.124460] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
[    6.125368] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.126274] usb usb5: Product: Generic Platform OHCI controller
[    6.126801] usb usb5: Manufacturer: Linux 6.5.5-300.fc39.aarch64 ohci_hcd
[    6.127395] usb usb5: SerialNumber: PRP0001:00
[    6.128241] hub 5-0:1.0: USB hub found
[    6.128603] hub 5-0:1.0: 1 port detected
[    6.129334] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.05
[    6.130056] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.130682] usb usb6: Product: Generic Platform OHCI controller
[    6.131199] usb usb6: Manufacturer: Linux 6.5.5-300.fc39.aarch64 ohci_hcd
[    6.131791] usb usb6: SerialNumber: PRP0001:01
[    6.132332] hub 6-0:1.0: USB hub found
[    6.132664] hub 6-0:1.0: 1 port detected
[    6.137721] udevadm[626]: systemd-udev-settle.service is deprecated. Please fix multipathd-configure.service, run-media-iso.mount not to pull it in.
[    6.139648] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.
[    6.143060] r8169 0004:01:00.0 enP4p1s0: renamed from eth0
[    6.146060] systemd[1]: Stopped systemd-vconsole-setup.service - Virtual Console Setup.
[    6.151224] systemd[1]: Stopping systemd-vconsole-setup.service - Virtual Console Setup...
[    6.162482] systemd[1]: Starting systemd-vconsole-setup.service - Virtual Console Setup...
[    6.162911] nvme nvme0: pci function 0000:01:00.0
[    6.163851] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[    6.166065] nvme nvme0: Shutdown timeout set to 10 seconds
[    6.174873] nvme nvme0: 1/0/0 default/read/poll queues
[    6.175638] nvme nvme0: Ignoring bogus Namespace Identifiers
[    6.177407]  nvme0n1: p1 p2
[    6.216942] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization.
[    6.221617] systemd[1]: multipathd-configure.service - Device-Mapper Multipath Default Configuration was skipped because of an unmet condition check (ConditionKernelCommandLine=rd.multipath=default).
[    6.233914] systemd[1]: Starting multipathd.service - Device-Mapper Multipath Device Controller...
[    6.261134] multipathd[647]: multipathd v0.9.5: start up
[    6.261664] multipathd[647]: /etc/multipath.conf does not exist, blacklisting all devices.
[    6.262450] multipathd[647]: You can run "/sbin/mpathconf --enable" to create
[    6.263100] multipathd[647]: /etc/multipath.conf. See man mpathconf(8) for more details
[    6.264281] multipathd[647]: /etc/multipath.conf does not exist, blacklisting all devices.
[    6.265041] multipathd[647]: You can run "/sbin/mpathconf --enable" to create
[    6.265676] multipathd[647]: /etc/multipath.conf. See man mpathconf(8) for more details
[    6.266435] multipathd[647]: reconfigure: setting up paths and maps
[    6.267038] systemd[1]: Started multipathd.service - Device-Mapper Multipath Device Controller.
[    6.270908] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
[    6.274811] systemd[1]: Reached target local-fs.target - Local File Systems.
[    6.303770] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.381931] systemd[1]: Finished systemd-vconsole-setup.service - Virtual Console Setup.
[    6.387089] systemd[1]: Reached target sysinit.target - System Initialization.
[    6.390821] systemd[1]: Reached target basic.target - Basic System.
[    6.412940] systemd[1]: Starting ignition-fetch-offline.service - Ignition (fetch-offline)...
[    6.414119] (igni[657]: ignition-fetch-offline.service: Referenced but unset environment variable evaluates to an empty string: IGNITION_ARGS
[    6.432381] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    6.433113] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.433738] usb 1-1: Product: USB 2.0 Hub
[    6.434642] hub 1-1:1.0: USB hub found
[    6.435129] hub 1-1:1.0: 4 ports detected
[    6.447915] usb 10-1: new SuperSpeed USB device number 2 using xhci-hcd
[    6.452724] ignition[657]: Ignition 2.16.2
[    6.453148] ignition[657]: Stage: fetch-offline
[    6.453573] ignition[657]: reading system config file "/usr/lib/ignition/base.d/00-core.ign"
[    6.457613] ignition[657]: reading system config file "/usr/lib/ignition/base.d/30-afterburn-sshkeys-core.ign"
[    6.460775] ignition[657]: no config dir at "/usr/lib/ignition/base.platform.d/metal"
[    6.461558] ignition[657]: no config URL provided
[    6.462049] ignition[657]: reading system config file "/usr/lib/ignition/user.ign"
[    6.462802] ignition[657]: fetched base config from "system"
[    6.463351] ignition[657]: no config at "/usr/lib/ignition/user.ign"
[    6.463982] ignition[657]: not a config (empty): provider config was empty, continuing with empty cache config
[    6.464892] ignition[657]: fetch-offline: fetch-offline passed
[    6.465430] ignition[657]: Ignition finished successfully
[    6.472378] usb 10-1: New USB device found, idVendor=0bda, idProduct=0316, bcdDevice= 2.04
[    6.473112] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.473756] usb 10-1: Product: USB3.0-CRW
[    6.474109] usb 10-1: Manufacturer: Generic
[    6.474476] usb 10-1: SerialNumber: 20120501030900000
[    6.475954] systemd[1]: Finished ignition-fetch-offline.service - Ignition (fetch-offline).
[    6.481223] systemd[1]: coreos-enable-network.service - CoreOS Enable Network was skipped because no trigger condition checks were met.
[    6.485045] usb-storage 10-1:1.0: USB Mass Storage device detected
[    6.485823] scsi host0: usb-storage 10-1:1.0
[    6.486402] usbcore: registered new interface driver usb-storage
[    6.489184] usbcore: registered new interface driver uas
[    6.489311] systemd[1]: Starting coreos-copy-firstboot-network.service - Copy CoreOS Firstboot Networking Config...
[    6.508876] coreos-copy-firstboot-network[670]: info: no files to copy from /etc/coreos-firstboot-network; skipping
[    6.519946] systemd[1]: Finished coreos-copy-firstboot-network.service - Copy CoreOS Firstboot Networking Config.
[    6.524158] systemd[1]: nm-initrd.service was skipped because of an unmet condition check (ConditionPathExists=/run/NetworkManager/initrd/neednet).
[    6.525345] systemd[1]: Reached target network.target - Network.
[    6.528803] systemd[1]: ignition-fetch.service - Ignition (fetch) was skipped because of an unmet condition check (ConditionPathExists=!/run/ignition.json).
[    6.536015] systemd[1]: Starting ignition-kargs.service - Ignition (kargs)...
[    6.539856] systemd[1]: ignition-ostree-transposefs-detect.service - Ignition OSTree: Detect Partition Transposition was skipped because of an unmet condition check (ConditionKernelCommandLine=ostree).
[    6.541470] systemd[1]: ignition-ostree-transposefs-save.service - Ignition OSTree: Save Partitions was skipped because of an unmet condition check (ConditionPathIsDirectory=/run/ignition-ostree-transposefs).
[    6.543600] systemd[1]: nm-wait-online-initrd.service was skipped because of an unmet condition check (ConditionPathExists=/run/NetworkManager/initrd/neednet).
[    6.544958] systemd[1]: Starting dracut-initqueue.service - dracut initqueue hook...
[    6.545953] (igni[680]: ignition-kargs.service: Referenced but unset environment variable evaluates to an empty string: IGNITION_ARGS
[    6.562586] ignition[680]: Ignition 2.16.2
[    6.563022] ignition[680]: Stage: kargs
[    6.563388] ignition[680]: reading system config file "/usr/lib/ignition/base.d/00-core.ign"
[    6.564374] ignition[680]: reading system config file "/usr/lib/ignition/base.d/30-afterburn-sshkeys-core.ign"
[    6.565472] ignition[680]: no config dir at "/usr/lib/ignition/base.platform.d/metal"
[    6.566206] ignition[680]: kargs: kargs passed
[    6.566622] ignition[680]: Ignition finished successfully
[    6.585959] systemd[1]: Finished ignition-kargs.service - Ignition (kargs).
[    6.598965] systemd[1]: Finished dracut-initqueue.service - dracut initqueue hook.
[    6.604187] systemd[1]: Reached target remote-fs-pre.target - Preparation for Remote File Systems.
[    6.608821] systemd[1]: Reached target remote-cryptsetup.target - Remote Encrypted Volumes.
[    6.613805] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[    6.617831] systemd[1]: coreos-kargs-reboot.service - CoreOS Kernel Arguments Reboot was skipped because of an unmet condition check (ConditionPathExists=/run/coreos-kargs-reboot).
[    6.619267] systemd[1]: coreos-livepxe-rootfs.service - Acquire Live PXE rootfs Image was skipped because of an unmet condition check (ConditionKernelCommandLine=!coreos.liveiso).
[    6.620708] systemd[1]: coreos-livepxe-persist-osmet.service - Persist Osmet Files (PXE) was skipped because of an unmet condition check (ConditionKernelCommandLine=!coreos.liveiso).
[    6.632205] systemd[1]: Starting dracut-pre-mount.service - dracut pre-mount hook...
[    6.639369] systemd[1]: Starting ignition-disks.service - Ignition (disks)...
[    6.641556] (igni[700]: ignition-disks.service: Referenced but unset environment variable evaluates to an empty string: IGNITION_ARGS
[    6.678504] ignition[700]: Ignition 2.16.2
[    6.678944] ignition[700]: Stage: disks
[    6.679309] ignition[700]: reading system config file "/usr/lib/ignition/base.d/00-core.ign"
[    6.680139] systemd[1]: Finished dracut-pre-mount.service - dracut pre-mount hook.
[    6.683840] ignition[700]: reading system config file "/usr/lib/ignition/base.d/30-afterburn-sshkeys-core.ign"
[    6.684922] ignition[700]: no config dir at "/usr/lib/ignition/base.platform.d/metal"
[    6.685634] ignition[700]: disks: disks passed
[    6.686073] ignition[700]: Ignition finished successfully
[    6.703946] systemd[1]: Finished ignition-disks.service - Ignition (disks).
[    6.708145] systemd[1]: ignition-ostree-transposefs-autosave-xfs.service - Ignition OSTree: Autosave XFS Rootfs Partition was skipped because of an unmet condition check (ConditionPathExists=/run/ignition-ostree-growfs.stamp).
[    6.709932] systemd[1]: ignition-ostree-transposefs-restore.service - Ignition OSTree: Restore Partitions was skipped because of an unmet condition check (ConditionPathIsDirectory=/run/ignition-ostree-transposefs).
[    6.829776] usb 1-1.2: new full-speed USB device number 3 using ehci-platform
[    7.031628] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c548, bcdDevice= 5.01
[    7.032371] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.033019] usb 1-1.2: Product: USB Receiver
[    7.033395] usb 1-1.2: Manufacturer: Logitech
[    7.035732] input: Logitech USB Receiver as /devices/platform/PNP0D20:00/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C548.0001/input/input0
[    7.089224] hid-generic 0003:046D:C548.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-PNP0D20:00-1.2/input0
[    7.091899] input: Logitech USB Receiver Mouse as /devices/platform/PNP0D20:00/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C548.0002/input/input1
[    7.093253] input: Logitech USB Receiver Consumer Control as /devices/platform/PNP0D20:00/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C548.0002/input/input2
[    7.145924] input: Logitech USB Receiver System Control as /devices/platform/PNP0D20:00/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C548.0002/input/input3
[    7.147256] hid-generic 0003:046D:C548.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-PNP0D20:00-1.2/input1
[    7.149840] hid-generic 0003:046D:C548.0003: hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-PNP0D20:00-1.2/input2
[    7.315522] mkfs.xfs[371]: meta-data=/run/ephemeral_base/loopfs isize=512    agcount=4, agsize=501335 blks
[    7.316432] mkfs.xfs[371]:          =                       sectsz=512   attr=2, projid32bit=1
[    7.317200] mkfs.xfs[371]:          =                       crc=1        finobt=1, sparse=1, rmapbt=0
[    7.318018] mkfs.xfs[371]:          =                       reflink=1    bigtime=1 inobtcount=1 nrext64=0
[    7.318862] mkfs.xfs[371]: data     =                       bsize=4096   blocks=2005339, imaxpct=25
[    7.319658] mkfs.xfs[371]:          =                       sunit=0      swidth=0 blks
[    7.320361] mkfs.xfs[371]: naming   =version 2              bsize=4096   ascii-ci=0, ftype=1
[    7.321111] mkfs.xfs[371]: log      =internal log           bsize=4096   blocks=16384, version=2
[    7.321888] mkfs.xfs[371]:          =                       sectsz=512   sunit=0 blks, lazy-count=1
[    7.322685] mkfs.xfs[371]: realtime =none                   extsz=4096   blocks=0, rtextents=0
[    7.346135] systemd[1]: Finished sysroot-xfs-ephemeral-mkfs.service.
[    7.351296] systemd[1]: Mounting run-ephemeral.mount - /run/ephemeral...
[    7.370783] loop: module loaded
[    7.372787] loop0: detected capacity change from 0 to 16042712
[    7.530045] scsi 0:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 6
[    7.531001] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.633143] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[    8.448842] sd 0:0:0:0: [sda] 62521344 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    8.449700] sd 0:0:0:0: [sda] Write Protect is off
[    8.450124] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00
[    8.450330] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    8.452935] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    8.459141] XFS (loop0): Mounting V5 Filesystem cfa4379e-5cc8-11ee-971d-ed7fb74d6e96
[    8.461476] XFS (loop0): Ending clean mount
[    8.463671] systemd[1]: Mounted run-ephemeral.mount - /run/ephemeral.
[    8.556465] systemd[1]: Found device dev-disk-by\x2dlabel-fedora\x2dcoreos\x2d39.20231006.1.0.device - SD_MMC fedora-coreos-39.20231006.1.0.
[    8.561928] systemd[1]: Reached target initrd-root-device.target - Initrd Root Device.
[    8.574915] systemd[1]: Mounting run-media-iso.mount - /run/media/iso...
[    8.593656] ISO 9660 Extensions: Microsoft Joliet Level 3
[    8.594341] ISO 9660 Extensions: RRIP_1991A
[    8.595780] systemd[1]: Mounted run-media-iso.mount - /run/media/iso.
[    8.611914] systemd[1]: Mounting sysroot.mount - /sysroot...
[    8.614279] systemd[1]: Starting coreos-liveiso-persist-osmet.service - Persist Osmet Files (ISO)...
[    8.619374] loop1: detected capacity change from 0 to 1250809
[    8.626062] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    8.632093] systemd[1]: Mounted sysroot.mount - /sysroot.
[    8.635296] bsdtar[748]: bsdtar: Failed to set default locale
[    8.637901] systemd[1]: Starting ostree-prepare-root.service - OSTree Prepare OS/...
[    8.718317] ostree-prepare-root[755]: Resolved OSTree target to: /sysroot/ostree/deploy/fedora-coreos/deploy/8462105c406cb0abfcccdaa5fae0c2acc2275d23bc0eb5e1a6a6241faff954e7.0
[    8.730884] ostree-prepare-root[755]: sysroot.readonly configuration value: 0 (fs writable: 0)
[    8.731692] ostree-prepare-root[755]: composefs: Mounting with no digest or signature check
[    8.732439] ostree-prepare-root[755]: composefs: optional support failed: No such file or directory
[    8.920957] systemd[1]: Finished coreos-liveiso-persist-osmet.service - Persist Osmet Files (ISO).

I'm still figuring out how to install lspci on a live CoreOS system.

soyflourbread commented 12 months ago

Outputs from lspci:

lspci
⬢[root@toolbox ~]# lspci -vvv
0000:01:00.0 Non-Volatile memory controller: Phison Electronics Corporation E16 PCIe4 NVMe Controller (rev 01) (prog-if 02 [NVM Express])
    Subsystem: Phison Electronics Corporation E16 PCIe4 NVMe Controller
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
    Capabilities: [200 v2] Advanced Error Reporting
        UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
        CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
        AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap+ ECRCChkEn-
            MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
        HeaderLog: 20000001 0000000f 00000009 001f8000
    Capabilities: [300 v1] Secondary PCI Express
        LnkCtl3: LnkEquIntrruptEn- PerformEqu-
        LaneErrStat: 0
    Capabilities: [340 v1] Physical Layer 16.0 GT/s 
    Capabilities: [378 v1] Lane Margining at the Receiver 
    Kernel driver in use: nvme
lspci: Unable to load libkmod resources: error -2

0004:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
    Subsystem: Realtek Semiconductor Co., Ltd. Device 0123
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
    Kernel driver in use: r8169
mariobalanica commented 12 months ago

Thanks, that looks good so far. What about the pci command in UEFI shell?

soyflourbread commented 12 months ago

Here you go: image

mariobalanica commented 12 months ago

Good. Will follow up with a proper fix soon.

mariobalanica commented 12 months ago

Done.

@harryzz, this is the same issue that you had with a Samsung drive.