CALL CAN NOT BE COMPLETED AS DIALED PLEASE TRY AGAIN LATER

[GoogleCodeExporter]

Created a new account using mobile app on Droid 2 Global, my account was 
created automatically with pbxes.org using GTALK as a trunk and when I try to 
call I'm getting a female voice
"CALL CAN NOT BE COMPLETED AS DIALED PLEASE TRY AGAIN LATER"
Sounds like a google voice operator.
What's wrong with my setup?

Original issue reported on code.google.com by jesses...@gmail.com on 9 Feb 2011 at 5:36

[GoogleCodeExporter]

Same issue here, everything was supposedly set up automatically, but it doesn't 
seem to be working.

Original comment by spinning...@gmail.com on 11 Feb 2011 at 8:54

[GoogleCodeExporter]

I agree, same issue.. I followed 

http://binglongx.wordpress.com/2011/02/13/google-voice-sipdroid-2-0-voip-over-da
ta-on-android-phones-ii/

but got this same issue

Original comment by Maxwellc...@gmail.com on 15 Feb 2011 at 10:26

[GoogleCodeExporter]

Same thing from me it worked and made calls for about a week and now i only get 
the call can not be completed as dialed ... whats the cause of this 

Original comment by larrylov...@gmail.com on 25 Feb 2011 at 1:08

[GoogleCodeExporter]

Same for me...  worked a week then no more.  May be coincidence but happened 
after porting number to Google voice.

Original comment by randalf...@gmail.com on 25 Feb 2011 at 3:05

[GoogleCodeExporter]

just figured mine out.  i had changed my password on google voice.  password 
needs to be changed at pbxes.org for google trunk.  make sure the password you 
use in creating your pbxes account with provided link in sipdroid app matches 
mathces your google voice password.

Original comment by randalf...@gmail.com on 25 Feb 2011 at 4:04

[GoogleCodeExporter]

i had the same problem. thanks randalf. that worked for me.

Original comment by shakeelc...@gmail.com on 18 Mar 2011 at 4:59

[GoogleCodeExporter]

When you altered the password to the correct one did it immediately work or did 
you have to wait awhile?

Original comment by jkame...@gmail.com on 1 Apr 2011 at 4:50

[GoogleCodeExporter]

With the recent revocation of the Sipdroid automatic account creation/setup--I 
had to manually create an account at pbxes.org--as well as manually set up the 
Trunk/Outbound/Extension settings.

I have a "green dot" on my Android status bar--but I can make no outgoing 
calls:  I get the female-voiced "Call cannot be completed as dialed..." 
recording.  My password hasn't changed, so that should NOT be the problem.

Original comment by wilber...@gmail.com on 1 Apr 2011 at 8:38

[GoogleCodeExporter]

You need to have the google voice trunk installed.  You can not do this 
manually without paying.

Original comment by tj1...@gmail.com on 1 Apr 2011 at 11:00

[GoogleCodeExporter]

I *have* paid for the "Soho" subscription--which is what allowed me to 
(manually) set up the Google Voice Trunk (and other settings).  I get the 
"green dot"--but can't make any outgoing calls ("Call cannot be completed...try 
again later").

Original comment by wilber...@gmail.com on 2 Apr 2011 at 3:13

[GoogleCodeExporter]

Issue 997 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 28 Dec 2011 at 11:20

[GoogleCodeExporter]

Issue 977 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 2 Feb 2012 at 7:19

[GoogleCodeExporter]

Issue 1012 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 2 Feb 2012 at 7:19

[GoogleCodeExporter]

Thanks for comment 5.

Original comment by bpwinfrey@gmail.com on 22 Feb 2012 at 7:16

[GoogleCodeExporter]

OMG i had issues for 2months an know i got it fix thank u all...

Original comment by domingue...@gmail.com on 25 Mar 2012 at 11:27

[GoogleCodeExporter]

I had special characters as a google password... only worked to set up via the 
mobile app and then finish through pbxes.org. Pbxes.org would not take my 
password. (Both had to be the same password and then it worked!)

Original comment by tiffanyl...@gmail.com on 15 May 2012 at 1:03

[GoogleCodeExporter]

Issue 1063 has been merged into this issue.

Original comment by pmerl...@googlemail.com on 16 Sep 2012 at 8:25

[GoogleCodeExporter]

Yes. This will solve your issue. Simply visit www2.pbxes.com and sign in. Then 
find 'Personal Date' section and select 'Delete Account'. You will be required 
to enter your password again and also a description/reason. After deleting the 
account, you will receive an email stating you have deleted your account. 
Afterwards, on your phone, find  your 'Application Manager' and uninstall 
'SipDroid'. After uninstalling completes, visit the 'PlayStore/Market' and 
reinstall 'SipDroid'. After completion, create a new pbxes account using the 
application. Be sure your SipDroid password is the EXACT same as your Google 
Voice password. This WILL resolve the issue. Any questions, feel free to 
comment. Hope this helped. Thanks.

Original comment by sorrelsa...@gmail.com on 1 Nov 2012 at 11:50

[GoogleCodeExporter]

Well, I have set up my sipdroid account, linked to GV, and turned on WIFI. 
Then, Pbxs account shows Gtalk trunk set up already. Then I see my ser and 
passwrd (which matches GV) and some dial rules... So,I can make calls no 
problem. But when attempt to MAKE INTERNATIONAL CALLS, I get "CALL CAN NOT BE 
COMPLETED AS DIALED PLEASE TRY AGAIN LATER". Is there specific way to call 
internationally? should I change the dial rules to something else? Am I missing 
something for international dialing? I have tried country code, city code, both 
toguether, + sign before/after, zeros all over, every way possible... Any help 
will b appreciated. 

Original comment by sveenc...@gmail.com on 4 Nov 2012 at 1:30

[GoogleCodeExporter]

randalf...@gmail.comWORKED WELL CHANGED THE PBX TO MY GOOGLE PASSWORD AND 
WORKED INSECONDS. THX RANDALF

just figured mine out.  i had changed my password on google voice.  password 
needs to be changed at pbxes.org for google trunk.  make sure the password you 
use in creating your pbxes account with provided link in sipdroid app matches 
mathces your google voice password.

Original comment by mobile9...@gmail.com on 11 Nov 2012 at 8:30

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

Is it possible the issue is I have two step verification on and need to 
generate an application specific password?

Original comment by dionysiu...@gmail.com on 22 Nov 2012 at 2:04

[GoogleCodeExporter]

It was an issue with two step authentication. I went under my 
accounts.google.com/security and set up an application specific password for 
pbxes. I used THAT password for ALL fields requiring a password in both the  
PBXes configuration site and in the config fields for Android. 

Original comment by dionysiu...@gmail.com on 22 Nov 2012 at 2:23

[GoogleCodeExporter]

#23 appears to be correct, however I only needed to provide the one-time 
password in the "Trunks" configuration.  In PBXes.org, on the left select 
"Trunks".  There should be a Trunk created by sipdroid called "GTALK/[your 
google identity]".  Enter the one-time password in the password box.

Original comment by fpo...@gmail.com on 6 Feb 2013 at 5:44

[GoogleCodeExporter]

As #16 stated Sipdroid / Pbxes does not accept special characters in your 
Google account.

Original comment by yertcl...@gmail.com on 12 Feb 2013 at 3:24

[GoogleCodeExporter]

#24 is confirmed

Original comment by h.st...@gmail.com on 12 Feb 2013 at 5:39

[GoogleCodeExporter]

Confirmed #24. Thanks so much!

Original comment by lucasbe...@gmail.com on 17 Apr 2013 at 11:51

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I just started having this issue today.  I have had a working account for about 
2 months, have not changed anything, until this error began.  Since then I have 
generated a new Application Specific Password, entered it in the trunk 
configuration, as well as changing my PBXes.org password, so I can log in.

Original comment by dbird1...@gmail.com on 25 Sep 2013 at 9:05

[GoogleCodeExporter]

I forgot to mention, inbound routes work fine.  This issue is just for outbound 
route.

Original comment by dbird1...@gmail.com on 25 Sep 2013 at 9:07

[GoogleCodeExporter]

i also have the same issue. i changed my password on pbxes.org to match my 
google voice account. i deleted the app and my account,then reinstalled and 
re-created pbxes account. but i still can't make outgoing calls. how can i 
solve this problem?  

Original comment by june3...@gmail.com on 25 Sep 2013 at 10:05

[GoogleCodeExporter]

count me in as having the same issue. I have tried everything I can, even
going as far as deleting my PBXes account, uninstalling SipDroid from my
Samsung. I reconfigured PBXes as I have in the past, except for outbound
route I see two new or different fields; route password and extension. I've
tried leaving those fields blank and I tried using my Google account
password and the extension (number only as in "200", not "username-200".

I'm stumped

Original comment by dionysiu...@gmail.com on 25 Sep 2013 at 10:19

[GoogleCodeExporter]

also having the exact same message as dbird1 and dion, pbxes working fine for 
months can no longer make outbound calls.  inbound calls are fine, reset pbxes 
account, deleted sip droid setup new account, reissued all new account specific 
passwords, used my main google password, reset all the password fields so they 
ALL MATCH and still nothing. am able to echo test on *43 also.  noticing 
resetcdr and playback noted in my call log everytime i try to make a call.  
submitting changes to personal information worked one time yesterday but when i 
started continually having the problem this no longer solved it.  very 
frustrating, when the service works it's great but when it breaks it really 
breaks badly.

Original comment by orra...@gmail.com on 26 Sep 2013 at 1:25

[GoogleCodeExporter]

Started having the same problem with pbxes and google voice trunks: inbound 
calls are fine, outbound calls get "you call cannot be completed as dialed"...

Original comment by leonid.m...@gmail.com on 26 Sep 2013 at 1:30

[GoogleCodeExporter]

i've been having the same problem for the last two days after it had been 
working fine... tried deleting, creating new account multiple times to no 
avail... tried using the same google voice passwd on pbxes... tried making the 
app specific passwd too to no avail... tried keeping all the passwords the same 
to no avail... please advise.

Original comment by stevenle...@gmail.com on 26 Sep 2013 at 1:51

[GoogleCodeExporter]

Google updated Hangouts and voice today, I am wondering if this broke this 
functionality.

Original comment by dbird1...@gmail.com on 26 Sep 2013 at 1:57

[GoogleCodeExporter]

I've switched my GV trunk back to simon's GV gateway - works just fine with 
both inbound and outbound.
Which means that this issue is PBXes/Asterisk specific. 

I wish there was a hosted Yate provider (this is what simon's gateway is 
running) similar to PBXes. That would be a more reliable option.

Original comment by leonid.m...@gmail.com on 26 Sep 2013 at 2:18

[GoogleCodeExporter]

How do you switch to Simons gv gateway?

Original comment by stevenle...@gmail.com on 26 Sep 2013 at 2:22

[GoogleCodeExporter]

Register at https://simonics.com/gvgw/
Once done you will get the server, username and password. Use them in your
SIP client.

Original comment by leonid.m...@gmail.com on 26 Sep 2013 at 4:34

[GoogleCodeExporter]

Hello I was having problems with making outgoing calls and I did what someone 
mentioned above and deleted my pbxes account and uninstalled and then installed 
again sipdroid but now it is telling me trunk already in use please any help is 
appreciated.

Original comment by Leticiat...@gmail.com on 26 Sep 2013 at 5:46

[GoogleCodeExporter]

Having the same problems for the past few days, tried the same solutions. #39 
solution worked just great (the password is the "secret" code, not your GV 
password). Thanks!

Original comment by matthew....@gmail.com on 26 Sep 2013 at 2:50

[GoogleCodeExporter]

For what it is worth, PBXes forum posts seem to admit there is a problem, 
although a temporary solution (for paid users) was to change to a different 
gateway (www1), but even that is now failing.  The statement on the forum (from 
what may be a PBXes employee, so one has to remember that the statement could 
be self serving) said that GV seemed to be blocking outgoing calls from PBXes.  
No ETA provided.  It would appear that moving to a different service provider 
is the only current solution/mitigation.

Original comment by gary.buh...@gmail.com on 26 Sep 2013 at 6:20

[GoogleCodeExporter]

Thank you stevenle.  I was able to use that gateway to create a SIP trunk from 
PBXes, this allowed me to keep all of my extensions in place.  Both inbound and 
outbound routing are working properly again.

Original comment by dbird1...@gmail.com on 26 Sep 2013 at 7:05

[GoogleCodeExporter]

Thanks!! I switched over to Simons by creating a new trunk using the Simons 
information and it worked.

Original comment by stevenle...@gmail.com on 26 Sep 2013 at 9:16

[GoogleCodeExporter]

I have been having the same problem with not being able to place outgoing calls 
for the last 2 days (getting the recorded message "Your call cannot be 
completed"). I finally changed my server from www4 to www3 and I have been able 
to make outgoing calls again. I earlier tried www2 and www7 which also did not 
work, but www3 worked for me.
To change your server, login to PBXes.org, go to Personal Data (found at the 
left-hand column), and click on Timezone::Datacenter. You will see a long list 
of locations and their www# servers. Select a different server and then click 
"Submit & Start" at the bottom of the page.

Original comment by cyhasti...@gmail.com on 26 Sep 2013 at 9:23

[GoogleCodeExporter]

I just started having this problem today. Idk if something changed with google 
voice app recent update. This is my primary and only calling service. My google 
password wasn't changed. I tried updating my pbx account info and that didn't 
solve the problem either as it usually does. I uninstalled app and deleted my 
pbx account as well to see if starting off anew would help but no. Same result 
as before.

SCH-M828C Samsung Galaxy Precedent
Firmware: 2.2.2 Froyo

Original comment by DuckussM...@gmail.com on 27 Sep 2013 at 11:33

[GoogleCodeExporter]

Try the solution in comment #39.  Of you have any advanced configuration 
options in PBXes that you do not want to abandon, set the new sip trunk up in 
PBXes, and change your default routes to reflect this change.

Original comment by dbird1...@gmail.com on 28 Sep 2013 at 1:10

[GoogleCodeExporter]

Confirmed changing server to www3. Allows outbound call routing! 

Original comment by orra...@gmail.com on 28 Sep 2013 at 1:47

[GoogleCodeExporter]

Inbound calls still work so I've found that using Voice+ (i.e. Google Voice 
Callback) from the Play Store allows me to place outgoing calls. Adds a couple 
more steps per call, but hopefully pbxes fixes the issue soon

Original comment by tbu...@gmail.com on 28 Sep 2013 at 2:03

[GoogleCodeExporter]

Simonics worked. At the bottom of sipdroid it says New pbx to my google voice. 
Am I supposed to reenter my gv password or enter the simonics registration 
(secret) password? Anyway it's working! Thank you so much!

Original comment by DuckussM...@gmail.com on 28 Sep 2013 at 2:49