[ENHANCEMENT]:Support for new xtopics in K- and L-series

[ZonPV]

At the moment there are some new topics like Heat_Power_Consumption and DHW_Power_Consumption available in the latest Heishamon firmware 3.2.3 that give no results in the dashboard of version 24.2. So the graphic Energy stays empty.

Also there is no value according defrosts. But that is because there is no support for that in the actual Heishamon firmware. Igor is busy with that subject. Maybe I have to split these issues?

Should be nice if there is time to solve these issues.

Als reminder: https://gathering.tweakers.net/forum/list_message/77515844#77515844

[edterbak]

I thought I had. Can you give me the exact topics, gathered from MQTT explorer?

I presume these are incorrect then:

_-Heat_Power_Consumption_Extra -Cool_Power_Consumption_Extra -DHW_Power_Consumption_Extra -Heat_Power_Production_Extra -Cool_Power_Production_Extra -DHW_Power_ProductionExtra

This is an example I listen to in v23.02 for the new series. panasonic_heat_pump/main/Heat_Power_Consumption_Extra

[ZonPV]

Sorry for delay. I expected a mail from Github in case of progress...

This is the complete output of MQTT Explorer: main Heatpump_State = 1 Pump_Flow = 20.18 Force_DHW_State = 0 Quiet_Mode_Schedule = 0 Operating_Mode_State = 0 Main_Inlet_Temp = 24 Main_Outlet_Temp = 26.50 Main_Target_Temp = 32 Compressor_Freq = 56 DHW_Target_Temp = 52 DHW_Temp = 44 Operations_Hours = 317 Operations_Counter = 164 Main_Schedule_State = 0 Outside_Temp = -1 Heat_Power_Production = -200 Heat_Power_Consumption = -200 Powerful_Mode_Time = 0 Quiet_Mode_Level = 0 Holiday_Mode_State = 0 ThreeWay_Valve_State = 0 Outside_Pipe_Temp = -5 DHW_Heat_Delta = -4 Heat_Delta = 5 Cool_Delta = 5 DHW_Holiday_Shift_Temp = -15 Defrosting_State = 0 Z1_Heat_Request_Temp = 22 Z1_Cool_Request_Temp = 28 Z1_Heat_Curve_Target_High_Temp = 32 Z1_Heat_Curve_Target_Low_Temp = 35 Z1_Heat_Curve_Outside_High_Temp = 15 Z1_Heat_Curve_Outside_Low_Temp = -5 Room_Thermostat_Temp = 20 Z2_Heat_Request_Temp = 35 Z2_Cool_Request_Temp = 0 Z1_Water_Temp = -78 Z2_Water_Temp = -78 Cool_Power_Production = -200 Cool_Power_Consumption = -200 DHW_Power_Production = -200 DHW_Power_Consumption = -200 Z1_Water_Target_Temp = 32 Z2_Water_Target_Temp = 35 Error = No error Room_Holiday_Shift_Temp = -15 Buffer_Temp = -78 Solar_Temp = -78 Pool_Temp = -78 Main_Hex_Outlet_Temp = 26 Discharge_Temp = 32 Inside_Pipe_Temp = 23 Defrost_Temp = -128 Eva_Outlet_Temp = -2 Bypass_Outlet_Temp = -128 Ipm_Temp = -128 Z1_Temp = 20 Z2_Temp = -128 DHW_Heater_State = 1 Room_Heater_State = 0 Internal_Heater_State = 0 External_Heater_State = 0 Fan1_Motor_Speed = 640 Fan2_Motor_Speed = 0 High_Pressure = 18.6 Pump_Speed = 2400 Low_Pressure = 0 Compressor_Current = 5.8 Force_Heater_State = 0 Sterilization_State = 0 Sterilization_Temp = 63 Sterilization_Max_Time = 15 Z1_Cool_Curve_Target_High_Temp = 15 Z1_Cool_Curve_Target_Low_Temp = 10 Z1_Cool_Curve_Outside_High_Temp = 30 Z1_Cool_Curve_Outside_Low_Temp = 20 Heating_Mode = 1 Heating_Off_Outdoor_Temp = 24 Heater_On_Outdoor_Temp = 0 Heat_To_Cool_Temp = 15 Cool_To_Heat_Temp = 10 Cooling_Mode = 0 Z2_Heat_Curve_Target_High_Temp = 35 Z2_Heat_Curve_Target_Low_Temp = 35 Z2_Heat_Curve_Outside_High_Temp = 15 Z2_Heat_Curve_Outside_Low_Temp = -5 Z2_Cool_Curve_Target_High_Temp = 15 Z2_Cool_Curve_Target_Low_Temp = 10 Z2_Cool_Curve_Outside_High_Temp = 30 Z2_Cool_Curve_Outside_Low_Temp = 20 Room_Heater_Operations_Hours = 0 DHW_Heater_Operations_Hours = 0 Heat_Pump_Model = 255 Pump_Duty = 95 Zones_State = 0 Max_Pump_Duty = 150 Heater_Delay_Time = 30 Heater_Start_Delta = -4 Heater_Stop_Delta = -2 Buffer_Installed = 0 DHW_Installed = 1 Solar_Mode = 0 Solar_On_Delta = 10 Solar_Off_Delta = 5 Solar_Frost_Protection = 5 Solar_High_Limit = 80 Pump_Flowrate_Mode = 0 Liquid_Type = 0 Alt_External_Sensor = 0 Anti_Freeze_Mode = 1 Optional_PCB = 0 Z1_Sensor_Settings = 2 Z2_Sensor_Settings = 0 Buffer_Tank_Delta = 5 External_Pad_Heater = 0 extra Heat_Power_Consumption_Extra = 1378 Cool_Power_Consumption_Extra = 0 DHW_Power_Consumption_Extra = 0 Heat_Power_Production_Extra = 4031 Cool_Power_Production_Extra = 0 DHW_Power_Production_Extra = 0 1wire 28c96e7204000095 =

A screenshot:

[url=https://imgbb.com/][img]https://i.ibb.co/pQCYbBN/MQTT-Panasonic.jpg[/img][/url]

[ZonPV]

Als ik bovenstaande lijst doorneem mis ik nog wel meer waardes:

Room_Heater_Operations_Hours = 0 DHW_Heater_Operations_Hours = 0

En lijken volgende waardes verwisseld:

DHW_Heater_State = 1 Room_Heater_State = 0

Op bedienpaneel staat momenteel alleen icoon van zonnetje met daarbij de aanduiding dat de buitenunit actief is. DHW wordt alleen in de ochtend vanaf 11:00 uur gemaakt. Via het interne programma schakelt de wp dan even naar mixed mode.. Na 12:00 uur weer terug naar alleen ruimteverwarming.

Ik moet daarbij aangeven dat ik momenteel de Heishamon niet in bedrijf heb. Alleen voor je bovenstaande vraag even de Heishamon aangekoppeld. Het bedienpaneel als thermostaat in gebruik in de huiskamer i.v.m. WAF..

[edterbak]

extra
Heat_Power_Consumption_Extra = 1378
Cool_Power_Consumption_Extra = 0
DHW_Power_Consumption_Extra = 0
Heat_Power_Production_Extra = 4031
Cool_Power_Production_Extra = 0
DHW_Power_Production_Extra = 0

I asume that means this:

panasonic_heat_pump/extra/Heat_Power_Consumption_Extra
panasonic_heat_pump/extra/Cool_Power_Consumption_Extra
panasonic_heat_pump/extra/DHW_Power_Consumption_Extra
panasonic_heat_pump/extra/Heat_Power_Production_Extra
panasonic_heat_pump/extra/Cool_Power_Production_Extra
panasonic_heat_pump/extra/DHW_Power_Production_Extra

I had the topics under main. Thats probably why they are not found. 😃

[ZonPV]

There is a screenshot from MQTT Explorer in my comment of Thursday:

[edterbak]

Update has been released, v24.03. Can you confirm it is working fine now?

[ZonPV]

I can confirm that those ExtraTopics work fine in v 24.03. Thx for all your effort