search

edterbak / NodeRed_Heishamon_control

a Node Red flow to interact with Heishamon (a panasonic heatpump through an ESP board)
35 stars 6 forks source link

[ENHANCEMENT]: Add waterpressure in NR dashboard. #167

Open ZonPV opened 1 month ago

ZonPV commented 1 month ago

Since I connected a Heishamon V5 with new firmware V 3.5 to my Panasonic model K All-in-One there is a (new) value in TOP115. That value is plausible and in Bar.

As far as I know there is no meter or way to read that value in the NR Dashboard. So I would ask for that friendly. Maybe it is an option to display that meter as an option (on/off) in the SystemConfiguration or Settings because older models do not offer that value. Same idea for the fan? My system has just 1 fan.. The dashboard shows there two.

Thanks in advance for all the good work!

edterbak commented 1 month ago

Hi!

I just read the topic in the forum. But I do not have heishamon v5. The highest heishamon firmware I see on the website is still 3.2.3

https://github.com/Egyras/HeishaMon

Where can I vind the 3.5 version?

geduxas commented 1 month ago

@edterbak it's not related to hardware version, it's just new K/L series of pump's have extra topic's where also provides pressure of system.. It's introduced from V3.2 of heishamon.

geduxas commented 1 month ago

oh, i am sorry.. it' wasn't included in official release... strange, because all new topic's were successfully decoded, but only extra topic's was revealed in that release..

so to be clear, all most work are done in IgorYbema repo, and after it reaches stable build it will appears in Egyras repo..

https://github.com/igorYbema/HeishaMon/

edterbak commented 1 month ago

I'll wait for the stable build, and then include it in next release.

ZonPV commented 1 month ago

@edterbak The topic 115 is not new. But in the stable version it had no value on my heishamon 1.3. Indeed firmware v 3.5, delivered with the new hardware, is not available at his site.. maybe that version will not work on older hardware? Just a guess. Thanks for your commitment.

geduxas commented 1 month ago

@ZonPV it could be that Igor switched hardware to ESP32.. so yes, it could be that older firmware will not work, and also pay attention to build version's :)