stuck on 'Found the USB handle' and gives an error with kernel patch './downr1n.sh: line 910: [: too many arguments'

anton@anton-desktop:/media/anton/Ubuntu For Gays/bruh/winra1n3/downr1n$ sudo ./downr1n.sh --downgrade 14.8 [*] Command ran: sudo ./downr1n.sh --downgrade 14.8 [19:55:50.943][3] usbmuxd v1.1.1 starting up [19:55:50.943][3] Using libusb 1.0.25 [19:55:50.944][3] Initialization complete downr1n | Version 3.0 Created by edwin, thanks palera1, and all people creator of path file boot

[] Waiting for devices libusb: warning [op_get_configuration] device unconfigured libusb: error [op_get_active_config_descriptor] device unconfigured [19:56:58.974][3] Could not get old configuration descriptor for device 1-28: LIBUSB_ERROR_NOT_FOUND [19:56:58.981][3] Connecting to new device on location 0x1001c as ID 1 [19:56:59.131][3] Connected to v2.0 device 1 on location 0x1001c with serial number 8345a4f14650cec6fbce5974747b7d6b481f5391 [] Detected normal mode device /media/anton/Ubuntu For Gays/bruh/winra1n3/downr1n/binaries/Linux/ideviceinfo: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory /media/anton/Ubuntu For Gays/bruh/winra1n3/downr1n/binaries/Linux/ideviceinfo: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory Hello, on 14.8! [] Switching device into recovery mode... /media/anton/Ubuntu For Gays/bruh/winra1n3/downr1n/binaries/Linux/ideviceinfo: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory /media/anton/Ubuntu For Gays/bruh/winra1n3/downr1n/binaries/Linux/ideviceenterrecovery: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory [/] if your device can't enter into recovery mode please try to force reboot and put it on recovery mode [] Waiting for device in recovery mode [19:57:06.284][3] Removed device 1 on location 0x1001c [] Waiting for devices [] Detected recovery mode device [] Getting device info... Detected cpid, your cpid is 0x8010 Detected model, your model is d101ap Detected deviceid, your deviceid is iPhone9,3 [] To get into DFU mode, you will be guided through 2 steps: [] Press any key when ready for DFU mode Get ready (0) Release side button, but keep holding volume down (9) Release side button, but keep holding volume down (2) [] Device entered DFU! [] Continuing... [] Extracting ipsw, hang on please ... 'ipsw/extracted//BuildManifest.plist' -> 'work/BuildManifest.plist' [] Got extract the IPSW successfully [] Creating ramdisk [-] Ramdisk is already created so SKIPPING ... [] Booting ramdisk usb_timeout: 5 [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: RESET ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: SPRAY ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: SETUP ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: PATCH ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Now you can boot untrusted images. usb_timeout: 5 [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 Found the USB handle. [==================================================] 100.0% [==================================================] 100.0% [==================================================] 100.0% [==================================================] 100.0% [==================================================] 100.0% [==================================================] 100.0% [==================================================] 100.0% [] Waiting for the ramdisk to finish booting libusb: warning [op_get_configuration] device unconfigured libusb: error [op_get_active_config_descriptor] device unconfigured [19:58:46.915][3] Could not get old configuration descriptor for device 1-40: LIBUSB_ERROR_NOT_FOUND [19:58:46.920][3] Connecting to new device on location 0x10028 as ID 2 [19:58:47.021][3] Connected to v2.0 device 2 on location 0x10028 with serial number ramdisk tool Sep 18 2022 20:14:43 [19:58:47.022][2] device_control_input: Got unhandled payload type 5 [19:58:47.123][2] device_control_input: Got unhandled payload type 5 Error connecting to device: No error information [] Mounting filesystems ... seputil: Gigalocker file (/mnt7/2AB1A94C-88B7-58C1-807C-0A0A23F155F7.gl) exists seputil: Gigalocker initialization completed sepi digest (48 bytes): 904cdb98a0e58d32e0c13173fd46fa361d8a8f37d41782d2a16c64924a868f28862163b90c28a820a7413999ad31fc4e sepi nonce (20 bytes): eff6b5c4d7ce5ddddceaf5405542b92774bf5d6b rsep digest (48 bytes): 85172acdedc54e6736148729b60022624c47ec5fc5822ff75af1d88fadfd346a488670b454aa3c0134f67164b5cdba2c rsep nonce (20 bytes): eff6b5c4d7ce5ddddceaf5405542b92774bf5d6b [] Dumpped SHSH [] Patching kernel ... ./downr1n.sh: строка 910: [: слишком много аргументов [] kernel patched with kpf Reboot into recovery mode ... [19:59:57.431][3] Removed device 2 on location 0x10028 [] To get into DFU mode, you will be guided through 2 steps: [] Press any key when ready for DFU mode Get ready (0) Release side button, but keep holding volume down (9) Release side button, but keep holding volume down (2) [] Device entered DFU! [ ]Patching some boot files... [] Finished moving the boot files to work [] Decrypthing ibss and iboot usb_timeout: 5 usb_abort_timeout_min: 0 [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: RESET ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: SETUP ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: SPRAY ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Stage: PATCH ret: true [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 CPID: 0x8010 Found the USB handle. Now you can boot untrusted images. [libusb] Waiting for the USB handle with VID: 0x5AC, PID: 0x1227 Found the USB handle.

edwin170 / downr1n

stuck on 'Found the USB handle' and gives an error with kernel patch './downr1n.sh: line 910: [: too many arguments' #56