eedabd / reaver-wps

Automatically exported from code.google.com/p/reaver-wps
0 stars 0 forks source link

4 digit pin #127

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago
A few things to consider before submitting an issue:

0. We write documentation for a reason, if you have not read it and are
having problems with Reaver these pages are required reading before
submitting an issue:
http://code.google.com/p/reaver-wps/wiki/HintsAndTips
http://code.google.com/p/reaver-wps/wiki/README
http://code.google.com/p/reaver-wps/wiki/FAQ
http://code.google.com/p/reaver-wps/wiki/SupportedWirelessDrivers
1. Reaver will only work if your card is in monitor mode.  If you do not
know what monitor mode is then you should learn more about 802.11 hacking
in linux before using Reaver.
2. Using Reaver against access points you do not own or have permission to
attack is illegal.  If you cannot answer basic questions (i.e. model
number, distance away, etc) about the device you are attacking then do not
post your issue here.  We will not help you break the law.
3. Please look through issues that have already been posted and make sure
your question has not already been asked here: http://code.google.com/p
/reaver-wps/issues/list
4. Often times we need packet captures of mon0 while Reaver is running to
troubleshoot the issue (tcpdump -i mon0 -s0 -w broken_reaver.pcap).  Issue
reports with pcap files attached will receive more serious consideration.

Answer the following questions for every issue submitted:

0. What version of Reaver are you using?  (Only defects against the latest
version will be considered.)
1.3, r87

1. What operating system are you using (Linux is the only supported OS)?
Backtrack 5 r1 (x86)

2. Is your wireless card in monitor mode (yes/no)?
yes

3. What is the signal strength of the Access Point you are trying to crack?
-45

4. What is the manufacturer and model # of the device you are trying to
crack?
Netgear - not sure of model #

5. What is the entire command line string you are supplying to reaver?
reaver -i mon0 -b xx:xx:xx:xx:xx:xx --pin=XXXX

6. Please describe what you think the issue is.
My computer died while trying to crack the final 3 digits + checksum.  Upon 
restart, I lost most of the progress (it's at 25% - I know that it got to at 
least 60% before cracking the first 4 digits).  I think that I remember what 
the first 4 digits were.  I know that I can specify the first 4 digits using 
--pin= - but is it possible to verify that my memory is correct, rather than 
wait for reaver to cycle through all 1,000 3 digit possibilities?

Original issue reported on code.google.com by demzrol...@gmail.com on 12 Jan 2012 at 1:24

GoogleCodeExporter commented 8 years ago
Since you are running the latest SVN, yes. Use the -vv option; reaver will 
print out information about which packets it is sending. If you see that it is 
sending a WSC_NACK immediately after the M4 message, then the first half of the 
pin is wrong. However, if you see that it is sending an M6 message, then the 
first half of the pin is correct.

It's a bit concerning that you lost so much progress though - Reaver should be 
periodically saving its session state to disk (every time you see a % complete 
status message, it should be saving the session state). I will test this to 
make sure it is working properly.

Original comment by cheff...@tacnetsol.com on 12 Jan 2012 at 2:09

GoogleCodeExporter commented 8 years ago
Out of curiosity, can you search your system for the session file of your 
target AP:

$ find / -name <bssid>.wpc

The <bssid> should be in all caps with no colons (i.e., 000102030405.wpc). 
Depending on how you've been keeping up with the SVN updates it may be possible 
that Reaver is loading an old wpc file and the newer wpc file got saved 
somewhere else. The three locations it could likely be in are:

1) The working directory where you ran Reaver
2) The /etc/reaver directory (older versions used this)
3) The /usr/local/etc/reaver directory (this path may vary based on your system)

Original comment by cheff...@tacnetsol.com on 12 Jan 2012 at 4:27

GoogleCodeExporter commented 8 years ago
I was always able to tell if the first 4 digits were correct from the time that 
option was introduced simply because reaver jumps to 90% finished status and 
counts upwards from there if the first 4 are correct. At least that's what I 
thought this is...

Original comment by efs...@gmail.com on 12 Jan 2012 at 4:52

GoogleCodeExporter commented 8 years ago
Yes, that is why it jumps to 90%. But if you manually specify the first 4 
digits, Reaver assumes you know what you are talking about and that those 4 
digits are correct, so it will automatically jump to 90%, even if those 4 
digits are wrong.

Original comment by cheff...@tacnetsol.com on 12 Jan 2012 at 5:01

GoogleCodeExporter commented 8 years ago

Original comment by cheff...@tacnetsol.com on 12 Jan 2012 at 2:46

GoogleCodeExporter commented 8 years ago
Is there a problem if you are above 90% and it's still changing the first four 
numbers?

Original comment by JonnyBla...@gmail.com on 13 Jan 2012 at 11:55

GoogleCodeExporter commented 8 years ago
The first 4 numbers change until 90.90%  After that they should no longer 
change, but if you hit 90.90%, unless it happens to be the very last number 
tried, it's likely the correct number was missed.

Original comment by TheShort...@gmail.com on 13 Jan 2012 at 2:50

GoogleCodeExporter commented 8 years ago

Original comment by cheff...@tacnetsol.com on 17 Jan 2012 at 1:10

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
Reaver jumps from 11% to 90% and do not know what to do I uramt more commands 
and still does not work    

 Trying pin 12285679
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12295678
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12295678
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12305674
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] 11.26% complete @ 2012-11-01 15:04:20 (17 seconds/pin)
[+] Trying pin 12305674
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300006
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300006
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12302222
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12302222
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] 90.94% complete @ 2012-11-01 15:05:04 (17 seconds/pin)
[+] Trying pin 12303335
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12303335
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12304448
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12304448
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12305551
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] 90.95% complete @ 2012-11-01 15:05:49 (17 seconds/pin)
[+] Trying pin 12305551
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12306664
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12306664
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12307777
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12307777
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] 90.98% complete @ 2012-11-01 15:06:33 (17 seconds/pin)
[+] Trying pin 12308880
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12308880
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12309993
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12309993
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300013
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] 91.00% complete @ 2012-11-01 15:07:19 (17 seconds/pin)
[+] Trying pin 12300013
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300020
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300020
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300037
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300037
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] 91.03% complete @ 2012-11-01 15:08:02 (17 seconds/pin)
[+] Trying pin 12300044
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300044
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300051
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300051
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300068
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] 91.05% complete @ 2012-11-01 15:08:48 (17 seconds/pin)
[+] Trying pin 12300068
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300075
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300075
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300082
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300082
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] 91.07% complete @ 2012-11-01 15:09:31 (17 seconds/pin)
[+] Trying pin 12300099
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300099
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300105
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300105
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300112
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] 91.09% complete @ 2012-11-01 15:10:17 (17 seconds/pin)
[+] Trying pin 12300112
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK
[+] Sending WSC NACK
[+] Trying pin 12300129
[+] Sending EAPOL START request
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12300129
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received WSC NACK

first 4 digits repeats can be good or not????????

Original comment by andrey.r...@gmail.com on 2 Nov 2012 at 10:12