eedabd / reaver-wps

Automatically exported from code.google.com/p/reaver-wps
0 stars 0 forks source link

WASH reporting WPS enable AP, but WPS is not configured #160

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
running r106 on BT5 R1 x64

looking at beacon frame it showed an entry for WPS
after clicking on it and viewing details, its status stated "Configured"
--> cracked without a problem

wash reported another AP as vulnerable
looking at beacon frame it showed an entry for WPS
however after clicking on it and viewing details, its status stated "Not 
configured"
--> reached 99.99% and kept cycling the last PIN forever

is Wash WPS detection based only on the presence of WPS field in the beacon 
frame?

Original issue reported on code.google.com by jcdento...@gmail.com on 22 Jan 2012 at 11:59

GoogleCodeExporter commented 8 years ago
"Configured" is usually just an indication that the AP has been set up with WPA 
(though this can vary based on vendor implementation). Wash reports WPS support 
as long as there is a WPS field on the beacon frame. If you got to 99.99% then 
the AP was responding to pin attempts, and you at least got the first half of 
the pin. It's a bit odd that it seems to have missed the second half?

Original comment by cheff...@tacnetsol.com on 22 Jan 2012 at 2:59

GoogleCodeExporter commented 8 years ago
ok then,

but with the exact same revision I was able to crack another AP that has 
"Configured" status (on the other hand it only showed WPS PIN and no PSK, that 
line was just missing)

on the "Not configured" is cracked the first half but not the rest.
any ideas why?
any ideas what/how to debug it?

Original comment by jcdento...@gmail.com on 22 Jan 2012 at 4:48

GoogleCodeExporter commented 8 years ago
I don't know why the first half would be accepted, but the second half would 
not. Have you tried supplying the correct pin with --pin to see if that works? 
Can you provide Reaver's output when run with the -vv option and a pcap?

Original comment by cheff...@tacnetsol.com on 22 Jan 2012 at 6:27

GoogleCodeExporter commented 8 years ago
when wps not configured the wifi cant b hack -able
mean's cant hack with reaver, just trying with a dictionary attack :(

Original comment by SHAHZAD...@gmail.com on 13 Dec 2013 at 5:47