Continous checking of output voltage on DCP module

eez-open / modular-psu-firmware

Firmware for EEZ Bench Box 3 (BB3)

https://www.envox.eu/eez-bb3/

GNU General Public License v3.0

94 stars 42 forks source link

Continous checking of output voltage on DCP module #202

Closed prasimix closed 3 years ago

prasimix commented 3 years ago

Check continuously (with exception of down-programming) output voltage when output is enabled if OVP HW is not enabled. If U_MON is higher then U_SET for more then 3% automatically switch off output and display popup like "Fault detected!"

This is not applicable in RProg mode.

prasimix commented 3 years ago

Fixed