With the following settings in function generator:
DCP#2, DOUT1, AOUT1 all to pulse, 200ms period, 50ms pulse width:
When I turn the output on, this is shown (single trigger on turn-on):
They all trigger at the same time as expected, duration of DCP is slightly below 50ms.
The next few triggers I see some jitter between the pulses.
If I keep the output running and wait a bit, I can see the DCP and MIO pulses shift in time the MIO pulse gets ahead of the DCP pulse. After 60 sec, it looks like:
With the following settings in function generator:
DCP#2, DOUT1, AOUT1 all to pulse, 200ms period, 50ms pulse width:
When I turn the output on, this is shown (single trigger on turn-on):
They all trigger at the same time as expected, duration of DCP is slightly below 50ms.
The next few triggers I see some jitter between the pulses.
If I keep the output running and wait a bit, I can see the DCP and MIO pulses shift in time the MIO pulse gets ahead of the DCP pulse. After 60 sec, it looks like:
And after 210 sec:
Sometimes there also is a small jump.
Running 1.8-alpha2 and 0.12 on MIO168.