When setting a different period (not frequency!) of a pulse waveform in the function generator the pulse width also changes. I don't think is is the expected behaviour: the pulse width should stay the same (if possible).
For me it should be like this:
in frequency mode: if you change the frequency then the duty cycle stays the same
in period mode: if you change the period the pulse width stays the same (if pulse width <= period, otherwise pulse width = period)
Tested this on DCP405 channel.
Example:
Now ONLY change period from 250ms to 350ms:
The pulse width is also changed.
When setting a different period (not frequency!) of a pulse waveform in the function generator the pulse width also changes. I don't think is is the expected behaviour: the pulse width should stay the same (if possible).
For me it should be like this:
Tested this on DCP405 channel.
Example:![image](https://user-images.githubusercontent.com/8796121/186718686-e0c5bbe2-545b-4dc9-8f84-6259134de5f0.png)
Now ONLY change period from 250ms to 350ms:
The pulse width is also changed.