search

efabless / caravel_mgmt_soc_litex

https://caravel-mgmt-soc-litex.readthedocs.io/en/latest/
Apache License 2.0
24 stars 14 forks source link

Make sure design is able to boot on a Digilent Arty A7 board #1

Open mithro opened 2 years ago

mithro commented 2 years ago

The Digilent Arty A7 board is an reasonable cheap, fairly large, modern and extremely common FPGA development board.

jeffdi commented 1 year ago

Currently supported on CMOD7. Will share repo publically.

proppy commented 1 year ago

@jeffdi is there any public documentation on how to get the design working on a CMOD/A7 board?

tmichalak commented 1 year ago

@proppy @jeffdi we have a WIP branch from which you can build a bitstream for Arty A7. Simply run make install_mcw to get an updated caravel_mgmt_soc_litex and then make vivado to build the bitstream. For the CMOD A7 it should be just a matter of replacing the XDC file.

jeffdi commented 1 year ago

Thanks for this. We will have a look.

On Tue, Dec 13, 2022 at 8:34 AM Tomasz Michalak @.***> wrote:

@proppy https://github.com/proppy @jeffdi https://github.com/jeffdi we have a WIP branch https://github.com/antmicro/caravel-lite/commits/arty from which you can build a bitstream for Arty A7. Simply run make install_mcw to get an updated caravel_mgmt_soc_litex https://github.com/antmicro/caravel_mgmt_soc_litex/tree/litex-lock and then make vivado to build the bitstream. For the CMOD A7 it should be just a matter of replacing the XDC file.

— Reply to this email directly, view it on GitHub https://github.com/efabless/caravel_mgmt_soc_litex/issues/1#issuecomment-1349009206, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKAZZ5JIVILRUUL354ZID23WNCQSPANCNFSM5HANGBPQ . You are receiving this because you were mentioned.Message ID: @.***>