search

eggsworks / egg58

a 58-key, low profile, split keyboard with RGB
https://eggs.works/
GNU General Public License v3.0
68 stars 3 forks source link

Question About jumpers #4

Closed cj360 closed 1 year ago

cj360 commented 1 year ago

So I have a pair of sea-micros another pro micro clone and the I2C resistors for a set of egg58. Screenshot (4)cropped

Should I be adding a jumper like the red color or just solder the pads like cyan?

tmick0 commented 1 year ago

The two sets of jumper pads are independent.

The ProMicro/EliteC jumper is about the position of the VBUS/RAW pin, in order to both power the LEDs and provide 5v to the other half of the keyboard. It looks like the Sea-Micro puts it in the same position as the Pro Micro, so you should choose the ProMicro position.

The Serial/I2C jumper selects the data pin which connects to the TRRS socket (PD1 for I2C or PD2 for softserial).

Each jumper should have one outer pad tied to the inner pad:

image

Sorry for the confusion - I'll update the readme with this information when I get a chance.