Grott scanning interval

[GroenZoom]

With your work i have got grott->mqtt running on HA2023.7.3 RPI3B+. Didn't succeed before with container image s that caused MQTT refusals. So far thank you for your efforts and work.

I had hoped that shortening the shinelink data interval from 5 down to 1 min that data resolution would improve. PV_out_actual in Watts is OK and refreshing every minute but generated_energy_total_today and generatied_energy_total_lifetime in KWh still coming in only every 8~13 minutes. Am i hoping for too much?

[chesterflaps]

Did you manage to get to the bottom of this?

Also, how/where did you shorten the shinelink data interval?

[GroenZoom]

You can change the push interval from default 5 min to 1 min in the Shinelan web UI login/password admin/admin.However resolution for power in Watts is 0,1 W and for Energy in kWh 0,1 kWh.Both are sensor entities that will update only when value changed n.b. more than 0,1 W and 0,1 kWh. The latter means that on our basic consumption of 200 ~ 300 Wh the entity will be updated only each 20 or 30 minutes. Power is updated each minute.RegardsMartinOp 10 aug. 2023 19:13 schreef chesterflaps @.***>: Did you manage to get to the bottom of this? Also, how/where did you shorten the shinelink data interval?

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

[github-actions[bot]]

There hasn't been any activity on this issue recently, so we clean up some of the older and inactive issues. Please make sure to update to the latest version and check if that solves the issue. Let us know if that works for you by leaving a comment 👍 This issue has now been marked as stale and will be closed if no further activity occurs. Thanks!