search

egony / cc2652p_cc1352p_RF-STAR

Hardware development for RF-STAR 2652/1352 modules
Other
33 stars 15 forks source link

Shield setup in home assistant OS with zigbe2mqtt #8

Open gid204 opened 2 years ago

gid204 commented 2 years ago

Hey thanks for this great open source project! I just received my shield I purchased of elekitsorparts.

I have an ODROID N2+ (same GPIO pinout as Rpi) running home assistant OS. I plug the shield in but don't seem to be getting any connection to it.

I've done a bit of searching but can't find any docs on how I can communicate with the shield (have the system recognise it). So that I can then set it up with zigbee2mqtt.

Any help or reference to useful docs is greatly appreciated!

gid204 commented 2 years ago

Looks like UART needs to be enabled....I'll try this after work today.

https://wiki.odroid.com/odroid-n2/application_note/gpio/uart

gid204 commented 2 years ago

I haven't been able to get UART configured on my hardware running HAOS. Any help would be greatly appreciated :)