ejwheeler3 / WahooKickrDisplayDingus

Project to use a LilyGo T-Display-S3 to display gear, grade and power info transmitted over BlueTooth from a Wahoo Kickr Smartbike
GNU General Public License v3.0
7 stars 0 forks source link

Weight on a virgin LilyGo #1

Open alohabrad opened 5 months ago

alohabrad commented 5 months ago

With my virgin board, the initial weight was 255KG, not defaultWEIGHT (which is 67).

I haven't had a chance to trace this fully yet, but perhaps you've already seen this?

Thanks!

ejwheeler3 commented 5 months ago

Thanks for the heads up, I’ll see if I can figure that out. In the meantime, are you able to get it save your actual weight via the settings mode? Hold both buttons after the dingus boots, and it should go into a mode where you can save your ftp and weight permanently to the board. Or until you reflash it, anyway.

On Mon, Jan 15, 2024 at 5:57 PM alohabrad @.***> wrote:

With my virgin board, the initial weight was 255KG, not defaultWEIGHT (which is 67).

I haven't had a chance to trace this fully yet, but perhaps you've already seen this?

Thanks!

— Reply to this email directly, view it on GitHub https://github.com/ejwheeler3/WahooKickrDisplayDingus/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATRMUKO5BPU4E26SZ47JXOTYOWX7LAVCNFSM6AAAAABB343VW2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4DENZXGQ4TQMY . You are receiving this because you are subscribed to this thread.Message ID: @.***>

alohabrad commented 5 months ago

I was able to save the weight, and it worked perfectly after that. On Jan 15, 2024, at 18:31, ejwheeler3 @.***> wrote: Thanks for the heads up, I’ll see if I can figure that out. In the

meantime, are you able to get it save your actual weight via the settings

mode? Hold both buttons after the dingus boots, and it should go into a

mode where you can save your ftp and weight permanently to the board. Or

until you reflash it, anyway.

On Mon, Jan 15, 2024 at 5:57 PM alohabrad @.***> wrote:

With my virgin board, the initial weight was 255KG, not defaultWEIGHT

(which is 67).

I haven't had a chance to trace this fully yet, but perhaps you've already

seen this?

Thanks!

Reply to this email directly, view it on GitHub

https://github.com/ejwheeler3/WahooKickrDisplayDingus/issues/1, or

unsubscribe

https://github.com/notifications/unsubscribe-auth/ATRMUKO5BPU4E26SZ47JXOTYOWX7LAVCNFSM6AAAAABB343VW2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4DENZXGQ4TQMY

.

You are receiving this because you are subscribed to this thread.Message

ID: @.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

ejwheeler3 commented 5 months ago

Found, the issue, will include the fix in my next push, likely this weekend. The next push will also include cadence and crank animation.

On Mon, Jan 15, 2024 at 8:17 PM alohabrad @.***> wrote:

I was able to save the weight, and it worked perfectly after that. On Jan 15, 2024, at 18:31, ejwheeler3 @.***> wrote: Thanks for the heads up, I’ll see if I can figure that out. In the

meantime, are you able to get it save your actual weight via the settings

mode? Hold both buttons after the dingus boots, and it should go into a

mode where you can save your ftp and weight permanently to the board. Or

until you reflash it, anyway.

On Mon, Jan 15, 2024 at 5:57 PM alohabrad @.***> wrote:

With my virgin board, the initial weight was 255KG, not defaultWEIGHT

(which is 67).

I haven't had a chance to trace this fully yet, but perhaps you've already

seen this?

Thanks!

Reply to this email directly, view it on GitHub

https://github.com/ejwheeler3/WahooKickrDisplayDingus/issues/1, or

unsubscribe

< https://github.com/notifications/unsubscribe-auth/ATRMUKO5BPU4E26SZ47JXOTYOWX7LAVCNFSM6AAAAABB343VW2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4DENZXGQ4TQMY>

.

You are receiving this because you are subscribed to this thread.Message

ID: @.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/ejwheeler3/WahooKickrDisplayDingus/issues/1#issuecomment-1892934637, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATRMUKKJEOMTTBVF4R6KHZTYOXIIZAVCNFSM6AAAAABB343VW2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQOJSHEZTINRTG4 . You are receiving this because you commented.Message ID: @.***>

alohabrad commented 5 months ago

Wonderful. Cadence will be a great addition!