Open GoogleCodeExporter opened 8 years ago
The problem occurs ONLY if you set the brightness to a very low level.
I went mad for days trying everything.. deep sleep, removing apps, killing apps
before sleep, etc etc... until I found this:
http://forum.archosfans.com/viewtopic.php?f=74&t=48374&p=329973
I had the problem before moving to UD (2.3.26) and after (UD 1.0), but now I
know the cause and it never occurs anymore. My brother has a 101 as me and
solved the problem as well.
I don't know if it's an hardware problem, in such a case a workaround could be
to deny the possibility to reduce the brightness level to the lowest values.
Original comment by michele....@gmail.com
on 18 Jun 2011 at 6:41
It would be better for the resume code to:
- Save brightness setting
- Set brightness to maximum
- brief delay
- restore brightness setting
This way, any brightness can be set, but on resume the LCD will properly start
up.
Original comment by moneta.m...@gmail.com
on 19 Jun 2011 at 9:53
Nice solution.
Another one cound be to save the brightness level, put it at max, and than put
the device to sleep.
At resume the brightness could be restored to the saved valued.
Original comment by michele....@gmail.com
on 22 Jun 2011 at 8:29
Original issue reported on code.google.com by
bluena...@gmail.com
on 17 Jun 2011 at 3:34