search

elcrni / Voron-Mods

Voron printer mods
GNU General Public License v3.0
171 stars 26 forks source link

Clearance for heatset tool #2

Closed eddietheengineer closed 2 years ago

eddietheengineer commented 2 years ago

Hello @elcrni! Thanks for making this mod, it looks really well done!

I've started printing the parts, but when I tried to insert the heatsets into the front piece, there wasn't enough clearance for the heatset insertion tool (I'm using LDO's), so it ended up melting the plastic:

image

image

Also, consider opening up the back screw hole pass throughs for the NEMA14 motor mount! This would allow mounting of M3 standoffs to mount a CAN toolhead board such as the EBB 36 V1.2

IMG_6369

elcrni commented 2 years ago

@eddietheengineer thanks for the feedback. I am aware of the issue but for now that's the only way. I am using thinner soldering tip and have no issues and not touching the plastic. Will see if this can be avoided completely. many thanks

mstawick commented 2 years ago

@eddietheengineer FYI, maybe it's helpful to you, I've used these tips: https://www.amazon.pl/dp/B09WPJ56JP/ref=pe_25095781_587317651_TE_item

and was able to embed the inserts cleanly.

elcrni commented 2 years ago

@eddietheengineer FYI, maybe it's helpful to you, I've used these tips: https://www.amazon.pl/dp/B09WPJ56JP/ref=pe_25095781_587317651_TE_item

and was able to embed the inserts cleanly.

Awesome, thanks for the link!