Open KnowledgeSeekerOnGitHub opened 3 months ago
Please also send a list of functions and uses, the doc provided do not have them and it is very confusing
do not use Arduino. Try to send command from PC directly
KnowledgeSeeker @.***> 于2024年3月10日周日 17:44写道:
Please also send a list of functions and uses, the doc provided do not have them and it is very confusing
— Reply to this email directly, view it on GitHub https://github.com/elechouse/VoiceRecognitionV3/issues/32#issuecomment-1987163001, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDEZT2MDUXGJTK4HOD3YXQTQ5AVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DGMBQGE . You are receiving this because you are subscribed to this thread.Message ID: @.***>
How? the module linked in the manua, is not on the elechouse page
do not use Arduino. Try to send command from PC directly KnowledgeSeeker @.> 于2024年3月10日周日 17:44写道: … Please also send a list of functions and uses, the doc provided do not have them and it is very confusing — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDEZT2MDUXGJTK4HOD3YXQTQ5AVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DGMBQGE . You are receiving this because you are subscribed to this thread.Message ID: @.>
do not use Arduino. Try to send command from PC directly KnowledgeSeeker @.> 于2024年3月10日周日 17:44写道: … Please also send a list of functions and uses, the doc provided do not have them and it is very confusing — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDEZT2MDUXGJTK4HOD3YXQTQ5AVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DGMBQGE . You are receiving this because you are subscribed to this thread.Message ID: @.>
even if i do not use arduino, this is arduino compatible, it is what it says, i need to use it in conjuction with an arduino for a project, even if i train it from PC, it need to work with my arduino for my purposes
Please also send a list of functions and uses, the doc provided do not have them and it is very confusing
Is this possible?
https://www.elechouse.com/product/speak-recognition-voice-recognition-module-v3/ visit this page and you could get the manual and video guide
KnowledgeSeeker @.***> 于2024年3月10日周日 18:06写道:
Please also send a list of functions and uses, the doc provided do not have them and it is very confusing
Is this possible?
— Reply to this email directly, view it on GitHub https://github.com/elechouse/VoiceRecognitionV3/issues/32#issuecomment-1987169922, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDDCYW322E4CSTWS7QDYXQWDRAVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DSOJSGI . You are receiving this because you commented.Message ID: @.***>
when visiting the product page im getting a 4040 not found
do not use Arduino. Try to send command from PC directly KnowledgeSeeker @.**> 于2024年3月10日周日 17:44写道: … Please also send a list of functions and uses, the doc provided do not have them and it is very confusing — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDEZT2MDUXGJTK4HOD3YXQTQ5AVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DGMBQGE . You are receiving this because you are subscribed to this thread.Message ID: @.**>
even if i do not use arduino, this is arduino compatible, it is what it says, i need to use it in conjuction with an arduino for a project, even if i train it from PC, it need to work with my arduino for my purposes
@wilson-elechouse can i also please get an answer to this?
I understand. But any Arduino code problem might also cause the problem. By sending commands to the module directly, we could check if the module has problems
KnowledgeSeeker @.***> 于2024年3月10日周日 18:14写道:
do not use Arduino. Try to send command from PC directly KnowledgeSeeker @.
*> 于2024年3月10日周日 17:44写道: … <#m3958824119200408471> Please also send a list of functions and uses, the doc provided do not have them and it is very confusing — Reply to this email directly, view it on GitHub <#32 (comment) https://github.com/elechouse/VoiceRecognitionV3/issues/32#issuecomment-1987163001>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDEZT2MDUXGJTK4HOD3YXQTQ5AVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DGMBQGE https://github.com/notifications/unsubscribe-auth/ABB5QDEZT2MDUXGJTK4HOD3YXQTQ5AVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DGMBQGE . You are receiving this because you are subscribed to this thread.Message ID: @*.>
even if i do not use arduino, this is arduino compatible, it is what it says, i need to use it in conjuction with an arduino for a project, even if i train it from PC, it need to work with my arduino for my purposes
@wilson-elechouse https://github.com/wilson-elechouse can i also please get an answer to this?
— Reply to this email directly, view it on GitHub https://github.com/elechouse/VoiceRecognitionV3/issues/32#issuecomment-1987172065, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDA5V7USSRQMMTTYMGLYXQXATAVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3TEMBWGU . You are receiving this because you were mentioned.Message ID: @.***>
It might be your network problem. We could visit that page
KnowledgeSeeker @.***> 于2024年3月10日周日 18:11写道:
when visiting the product page im getting a 4040 not found
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
I understand. But any Arduino code problem might also cause the problem. By sending commands to the module directly, we could check if the module has problems KnowledgeSeeker @.> 于2024年3月10日周日 18:14写道: … do not use Arduino. Try to send command from PC directly KnowledgeSeeker @. > 于2024年3月10日周日 17:44写道: … <#m3958824119200408471> Please also send a list of functions and uses, the doc provided do not have them and it is very confusing — Reply to this email directly, view it on GitHub <#32 (comment) <#32 (comment)>>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDEZT2MDUXGJTK4HOD3YXQTQ5AVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DGMBQGE https://github.com/notifications/unsubscribe-auth/ABB5QDEZT2MDUXGJTK4HOD3YXQTQ5AVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3DGMBQGE . You are receiving this because you are subscribed to this thread.Message ID: @*.> even if i do not use arduino, this is arduino compatible, it is what it says, i need to use it in conjuction with an arduino for a project, even if i train it from PC, it need to work with my arduino for my purposes @wilson-elechouse https://github.com/wilson-elechouse can i also please get an answer to this? — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDA5V7USSRQMMTTYMGLYXQXATAVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3TEMBWGU . You are receiving this because you were mentioned.Message ID: *@.>
the module does not have any problems, i have tried it in an Arduino Uno and an Arduino Mega, I can train, clear, load and use all commands and the sample_led_control works
It might be your network problem. We could visit that page KnowledgeSeeker @.> 于2024年3月10日周日 18:11写道: … when visiting the product page im getting a 4040 not found — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.>
In my Arduino Uno Wifi R4, it is failing the
if(myVR.clear() == 0){ Serial.println("Recognizer cleared."); }else{ Serial.println("Not find VoiceRecognitionModule."); Serial.println("Please check connection and restart Arduino."); while(1); }
check myVR.clear() == 0 is not being fulfilled
What exactly does that do?
So it works with other Arduino version, but not on Arduino Uno Wifi R4? manual: https://www.elechouse.com/elechouse/images/product/VR3/VR3_manual.pdf video guide: https://vimeo.com/94925137 https://vimeo.com/94926818
KnowledgeSeeker @.***> 于2024年3月10日周日 18:23写道:
In my Arduino Uno Wifi R4, it is failing the
if(myVR.clear() == 0){ Serial.println("Recognizer cleared."); }else{ Serial.println("Not find VoiceRecognitionModule."); Serial.println("Please check connection and restart Arduino."); while(1); } check
myVR.clear() == 0 is not being fulfilled
What exactly does that do?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
So it works with other Arduino version, but not on Arduino Uno Wifi R4? manual: https://www.elechouse.com/elechouse/images/product/VR3/VR3_manual.pdf video guide: https://vimeo.com/94925137 https://vimeo.com/94926818 KnowledgeSeeker @.> 于2024年3月10日周日 18:23写道: … In my Arduino Uno Wifi R4, it is failing the if(myVR.clear() == 0){ Serial.println("Recognizer cleared."); }else{ Serial.println("Not find VoiceRecognitionModule."); Serial.println("Please check connection and restart Arduino."); while(1); } check myVR.clear() == 0 is not being fulfilled What exactly does that do? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.>
yes
@wilson-elechouse are you a part of the official arduino discord?
So it works with other Arduino version, but not on Arduino Uno Wifi R4? manual: https://www.elechouse.com/elechouse/images/product/VR3/VR3_manual.pdf video guide: https://vimeo.com/94925137 https://vimeo.com/94926818 KnowledgeSeeker @.> 于2024年3月10日周日 18:23写道: … In my Arduino Uno Wifi R4, it is failing the if(myVR.clear() == 0){ Serial.println("Recognizer cleared."); }else{ Serial.println("Not find VoiceRecognitionModule."); Serial.println("Please check connection and restart Arduino."); while(1); } check myVR.clear() == 0 is not being fulfilled What exactly does that do? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.>
i have seen all 3 of them. when following the manual it works for the mega and the uno non-wifi. Just doesnt for the Wifi Rev4.
i have given the errors im getting on the post's initial msg
This library was created 8 years ago. it uses softserial library. I suggest you check if Arduino wifi already occupied those softserial pins for other purposes.
KnowledgeSeeker @.***> 于2024年3月10日周日 18:28写道:
So it works with other Arduino version, but not on Arduino Uno Wifi R4? manual: https://www.elechouse.com/elechouse/images/product/VR3/VR3_manual.pdf video guide: https://vimeo.com/94925137 https://vimeo.com/94926818 KnowledgeSeeker @.
> 于2024年3月10日周日 18:23写道: … <#m-6143255801623839392> In my Arduino Uno Wifi R4, it is failing the if(myVR.clear() == 0){ Serial.println("Recognizer cleared."); }else{ Serial.println("Not find VoiceRecognitionModule."); Serial.println("Please check connection and restart Arduino."); while(1); } check myVR.clear() == 0 is not being fulfilled What exactly does that do? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.>
i have seen all 3 of them. when following the manual it works for the mega and the uno non-wifi. Just doesnt for the Wifi Rev4.
i have given the errors im getting on the post's initial msg
— Reply to this email directly, view it on GitHub https://github.com/elechouse/VoiceRecognitionV3/issues/32#issuecomment-1987176541, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDE3RWJN23UKPBTS6E3YXQYUHAVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3TMNJUGE . You are receiving this because you were mentioned.Message ID: @.***>
This library was created 8 years ago. it uses softserial library. I suggest you check if Arduino wifi already occupied those softserial pins for other purposes. KnowledgeSeeker @.> 于2024年3月10日周日 18:28写道: … So it works with other Arduino version, but not on Arduino Uno Wifi R4? manual: https://www.elechouse.com/elechouse/images/product/VR3/VR3_manual.pdf video guide: https://vimeo.com/94925137 https://vimeo.com/94926818 KnowledgeSeeker @. > 于2024年3月10日周日 18:23写道: … <#m-6143255801623839392> In my Arduino Uno Wifi R4, it is failing the if(myVR.clear() == 0){ Serial.println("Recognizer cleared."); }else{ Serial.println("Not find VoiceRecognitionModule."); Serial.println("Please check connection and restart Arduino."); while(1); } check myVR.clear() == 0 is not being fulfilled What exactly does that do? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.> i have seen all 3 of them. when following the manual it works for the mega and the uno non-wifi. Just doesnt for the Wifi Rev4. i have given the errors im getting on the post's initial msg — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDE3RWJN23UKPBTS6E3YXQYUHAVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3TMNJUGE . You are receiving this because you were mentioned.Message ID: @.>
i checked the pinouts of the Wifi, it has the same pinouts of the Uno non-wifi, and it works in the non wifi.
This library was created 8 years ago. it uses softserial library. I suggest you check if Arduino wifi already occupied those softserial pins for other purposes. KnowledgeSeeker @.> 于2024年3月10日周日 18:28写道: … So it works with other Arduino version, but not on Arduino Uno Wifi R4? manual: https://www.elechouse.com/elechouse/images/product/VR3/VR3_manual.pdf video guide: https://vimeo.com/94925137 https://vimeo.com/94926818 KnowledgeSeeker @. > 于2024年3月10日周日 18:23写道: … <#m-6143255801623839392> In my Arduino Uno Wifi R4, it is failing the if(myVR.clear() == 0){ Serial.println("Recognizer cleared."); }else{ Serial.println("Not find VoiceRecognitionModule."); Serial.println("Please check connection and restart Arduino."); while(1); } check myVR.clear() == 0 is not being fulfilled What exactly does that do? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.> i have seen all 3 of them. when following the manual it works for the mega and the uno non-wifi. Just doesnt for the Wifi Rev4. i have given the errors im getting on the post's initial msg — Reply to this email directly, view it on GitHub <#32 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDE3RWJN23UKPBTS6E3YXQYUHAVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGE3TMNJUGE . You are receiving this because you were mentioned.Message ID: @.>
Would the problems be because ESP8266 is integrated into the board?
Please reply
can i get a list of what the functions do?
17:06:35.764 -> Elechouse Voice Recognition V3 Module
17:06:35.764 -> Control LED sample
17:06:36.734 -> Not find VoiceRecognitionModule.
17:06:36.734 -> Please check connection and restart Arduino.
what could lead to this error in sample_led_control
UNO R4 WiFi has different MCU with UNO R3 I suggest you study the softserial library and change the code https://docs.arduino.cc/learn/built-in-libraries/software-serial/
KnowledgeSeeker @.***> 于2024年3月10日周日 19:37写道:
17:06:35.764 -> Elechouse Voice Recognition V3 Module 17:06:35.764 -> Control LED sample 17:06:36.734 -> Not find VoiceRecognitionModule. 17:06:36.734 -> Please check connection and restart Arduino.
what could lead to this error in sample_led_control
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
Thanks a lot i'll look into it right away. Anything else you can suggest?
Also i know im asking this a lot but is there a list of functions available for study so i can easily edit the code?
I was getting desperate
https://dropmeafile.com/#978386e3d3
KnowledgeSeeker @.***> 于2024年3月10日周日 21:38写道:
Also i know im asking this a lot but is there a list of functions available for study so i can easily edit the code?
— Reply to this email directly, view it on GitHub https://github.com/elechouse/VoiceRecognitionV3/issues/32#issuecomment-1987234738, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDEXI2S5WCNL3GZHTATYXRO5DAVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBXGIZTINZTHA . You are receiving this because you were mentioned.Message ID: @.***>
I have that, i was asking for the description of all methods and functions present in the library, like
myVR.clear()
what exactly does that do?
Sorry, I am not a software developer. This command should be the function of deleting all commands in the recognizer.
KnowledgeSeeker @.***> 于2024年3月10日周日 21:51写道:
I have that, i was asking for the description of all methods and functions present in the library, like
myVR.clear()
what exactly does that do?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
Sorry, I am not a software developer. This command should be the function of deleting all commands in the recognizer. KnowledgeSeeker @.> 于2024年3月10日周日 21:51写道: … I have that, i was asking for the description of all methods and functions present in the library, like myVR.clear() what exactly does that do? — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.>
Do you have the contact or any way i can contact the person who has developed this library please?
Hello?
Sorry for replying late that's the function to define the softserial pins
KnowledgeSeeker @.***> 于2024年3月12日周二 01:16写道:
Hello?
— Reply to this email directly, view it on GitHub https://github.com/elechouse/VoiceRecognitionV3/issues/32#issuecomment-1989001119, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABB5QDF4MAWYOWBGBSWNCTLYXXRFTAVCNFSM6AAAAABEO2KLCKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOBZGAYDCMJRHE . You are receiving this because you were mentioned.Message ID: @.***>
When using sample_train i get the output :
`train-------------------------------------------------------------------------------- Command Format Error!
clear
Clear recognizer failed or timeout.
`
When using sample_control_led for simplicity the connection it is not recognised.
Output:
Elechouse Voice Recognition V3 Module Control LED sample Not find VoiceRecognitionModule. Please check connection and restart Arduino.
it is failing the
if(myVR.clear() == 0){ Serial.println("Recognizer cleared."); }else{ Serial.println("Not find VoiceRecognitionModule."); Serial.println("Please check connection and restart Arduino."); while(1); }
checkmyVR.clear() == 0
is not being fulfilledplease help