add support for board ROG Zenith II Extreme

[krzemienski]

# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.2.0 present.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
    Manufacturer: ASUSTeK COMPUTER INC.
    Product Name: ROG ZENITH II EXTREME
    Version: Rev 1.xx
    Serial Number: 191161234900127
    Asset Tag: Default string
    Features:
        Board is a hosting board
        Board is removable
        Board is replaceable
    Location In Chassis: Default string
    Chassis Handle: 0x0003
    Type: Motherboard
    Contained Object Handles: 0

Handle 0x003C, DMI type 10, 6 bytes
On Board Device Information
    Type: Video
    Status: Enabled
    Description:    To Be Filled By O.E.M.

Handle 0x0042, DMI type 41, 11 bytes
Onboard Device
    Reference Designation:  Onboard IGD
    Type: Video
    Status: Enabled
    Type Instance: 1
    Bus Address: 0000:00:02.0

Handle 0x0043, DMI type 41, 11 bytes
Onboard Device
    Reference Designation:  Onboard LAN
    Type: Ethernet
    Status: Enabled
    Type Instance: 1
    Bus Address: 0000:00:19.0

Handle 0x0044, DMI type 41, 11 bytes
Onboard Device
    Reference Designation:  Onboard 1394
    Type: Other
    Status: Enabled
    Type Instance: 1
    Bus Address: 0000:03:1c.2

Currently when trying to install via make dkms I run into this error, Is this due to the board not being found in the support boards map it looks like is used? Hopefully it is as simple as that, I wasn't sure how/if the define you have the board name needed a specific naming convention.

Creating symlink /var/lib/dkms/asus-wmi-sensors/b6c25d2/source ->
                 /usr/src/asus-wmi-sensors-b6c25d2

DKMS: add completed.

Kernel preparation unnecessary for this kernel.  Skipping...

Building module:
cleaning build area...
make -j64 KERNELRELEASE=5.6.2-050602-generic TARGET=5.6.2-050602-generic...
Signing module:
 - /var/lib/dkms/asus-wmi-sensors/b6c25d2/5.6.2-050602-generic/x86_64/module/asus-wmi-sensors.ko
Secure Boot not enabled on this system.
cleaning build area...

DKMS: build completed.

asus-wmi-sensors.ko:
Running module version sanity check.
 - Original module
   - No original module exists within this kernel
 - Installation
   - Installing to /lib/modules/5.6.2-050602-generic/updates/dkms/

depmod...

DKMS: install completed.
modprobe: ERROR: could not insert 'asus_wmi_sensors': No such device
make: *** [Makefile:102: dkms] Error 1

[electrified]

Hi.

The Asus Threadripper 3rd gen boards, like the X570 boards don't have the WMI interface.

They do however have the Nuvoton NCT6798D sensor IC which is supported by the mainline nct6775 driver.

[krzemienski]

Well that was really freaking simple...

just ran sudo sensors-detect —auto

Thanks for you work on this project though, maybe one day I’ll be as brave as you and write kernel modules for fun!