elementary / installer

Installer front-end for Linux-based OSes
https://elementary.io
GNU General Public License v3.0
172 stars 43 forks source link

Elementary goes to tty1 after installation via USB #784

Open Tealdragon204 opened 1 month ago

Tealdragon204 commented 1 month ago

Discussed in https://github.com/elementary/installer/discussions/783

Originally posted by **Tealdragon204** June 6, 2024 ![ntfayb26pw4d1](https://github.com/elementary/installer/assets/31302428/56f2f1a3-ccb8-4576-97ab-ced71ff04484) Login never works because I didn't even get to make an account. Went to this screen and then nothing. I can't log in since I never made an account. I tried inputting nothing. Didn't work Tried inputting something in case it would "sign up" also didn't work Other than that all I can seem to do is move to and from tty1-tty6 Restarting does nothing I'm using an Nvidia GPU so I checked the additional proprietary software option. Seemed to work fine in the demo I did Currently installed on a partitioned drive but also occurred earlier on a non-partitioned drive as well This is also my second USB, I have tried both BalenaEtcher and Rufus for making the bootable USB (in case either one of those was an issue). Likewise I also had to boot the USB demo in safe graphics mode (Normal mode did not work, is this potentially related?) Searched online for similar problems but all are from Elementary OS 6 and did not solve my issue Specs:. CPU: R9 5900X GPU: RTX 4090 Motherboard: Asus ROG Crosshair VIII Dark Hero X570 RAM: 64 GB DDR4 4000 CL18 Storage Device: Samsung 980 Pro 2 TB Likewise if I boot in the normal mode instead of safe graphics off of the USB i get this far Elementary was the login i found from other issues but at this point I am clueless Note: this is off the USB, not the install ![IMG_20240606_164616_042.jpg](https://github.com/elementary/installer/assets/31302428/02953f30-c6a0-4794-8d9b-3aca4aaf52fb) Made an install without the recommended proprietary drivers and the issue also persists there Note: I have an internet connection via ethernet, so that should work