why stop just can see the print AutoConnect, but can't go on..
this is my debug log...
`76
Disconnecting
0
CLOSED
at GSM_ReplyFlag !=燾oming begin...
AT
OK
+++
AT
OK
ATE1
OK
AT+CREG?
+CREG: 0,1
OK
AT+CIPMUX=0
OK
AT+CIPMODE=1
OK
AT+CGATT?
+CGATT: 1
OK
modemStatus = 3
_tcpStatus = 2
at GSM_ReplyFlag != 7
AT+CIPSTATUS
OK
STATE: IP INITIAL
else _tcpStatusPrev == _tcpStatus
mySerial.print(_tcpStatus); is ->>>> :
<<<<<<<<<<<------
AT+CSTT="CMNET"
OK
at GSM_ReplyFlag != 7
AT+CIPSTATUS
OK
STATE: IP START
else _tcpStatusPrev == _tcpStatus
mySerial.print(_tcpStatus); is ->>>> :
<<<<<<<<<<<------
AT+CIICR
OK
at GSM_ReplyFlag != 7
AT+CIPSTATUS
OK
STATE: IP GPRSACT
else _tcpStatusPrev == _tcpStatus
mySerial.print(_tcpStatus); is ->>>> :
<<<<<<<<<<<------
AT+CIFSR
10.40.77.11
at GSM_ReplyFlag != 7
AT+CIPSTATUS
OK
STATE: IP STATUS
else _tcpStatusPrev == _tcpStatus
mySerial.print(_tcpStatus); is ->>>> :
<<<<<<<<<<<------
AT+CIPSTART="TCP","test.mosquitto.org","1883"
why stop just can see the print AutoConnect, but can't go on..
this is my debug log...
`76 Disconnecting 0 CLOSED at GSM_ReplyFlag !=燾oming begin... AT
OK +++ AT
OK ATE1
OK AT+CREG?
+CREG: 0,1
OK AT+CIPMUX=0
OK AT+CIPMODE=1
OK AT+CGATT?
+CGATT: 1
OK modemStatus = 3 _tcpStatus = 2 at GSM_ReplyFlag != 7 AT+CIPSTATUS
OK
STATE: IP INITIAL else _tcpStatusPrev == _tcpStatus mySerial.print(_tcpStatus); is ->>>> : <<<<<<<<<<<------ AT+CSTT="CMNET"
OK at GSM_ReplyFlag != 7 AT+CIPSTATUS
OK
STATE: IP START else _tcpStatusPrev == _tcpStatus mySerial.print(_tcpStatus); is ->>>> : <<<<<<<<<<<------ AT+CIICR
OK at GSM_ReplyFlag != 7 AT+CIPSTATUS
OK
STATE: IP GPRSACT else _tcpStatusPrev == _tcpStatus mySerial.print(_tcpStatus); is ->>>> : <<<<<<<<<<<------ AT+CIFSR
10.40.77.11 at GSM_ReplyFlag != 7 AT+CIPSTATUS
OK
STATE: IP STATUS else _tcpStatusPrev == _tcpStatus mySerial.print(_tcpStatus); is ->>>> : <<<<<<<<<<<------ AT+CIPSTART="TCP","test.mosquitto.org","1883"
OK
CONNECT MQTT.TCP_Flag = True AutoConnect`