Nibe heat pump integration - No entities shown

[Sleazified]

Hello.

I have setup a lilygo-t board and connected it successfully to my nibe SMO40, i added the nibe heat pump integration, but i dont get any entities except for "Climate System S1".

the config part says +541 entities hidden. How can i activate some of these?

Cheers.

[rici44]

I got the same, how did you solve this?

[Sleazified]

Hej Rici.

Go to the integration and activate the entities you want to activate, this have to be done manually as there is too many entities in the integration. And be wary of activating too many, then the integration crashes.

Den man. 14. aug. 2023 kl. 12.41 skrev Rici Mainly @.***

:

I got the same, how did you solve this?

— Reply to this email directly, view it on GitHub https://github.com/elupus/esphome-nibe/issues/30#issuecomment-1677090480, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKGBMI7UK4TLZZEXLFVVYZ3XVH6HJANCNFSM6AAAAAAWY7EUE4 . You are receiving this because you modified the open/close state.Message ID: @.***>

--

Torben Rosenberg Nielsen

[rici44]

Hi @Sleazified

But when I try to change climate sensor I receive an error https://community.home-assistant.io/t/how-to-connect-to-nibe-heat-pump-without-the-cloud/381099/166?u=richi44

[Sleazified]

I cant do that either, sorry cant help with that :(

Den man. 14. aug. 2023 kl. 13.30 skrev Rici Mainly @.***

:

Hi @Sleazified https://github.com/Sleazified

But when I try to change climate sensor I receive an error https://community.home-assistant.io/t/how-to-connect-to-nibe-heat-pump-without-the-cloud/381099/166?u=richi44

— Reply to this email directly, view it on GitHub https://github.com/elupus/esphome-nibe/issues/30#issuecomment-1677151108, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKGBMI656UCXMMPPR6UI5NTXVID5TANCNFSM6AAAAAAWY7EUE4 . You are receiving this because you were mentioned.Message ID: @.***>

--

Torben Rosenberg Nielsen

[Sleazified]

i dont actually think you are supposed to be able to do that, you need to activate the other entities and control instead.

Den man. 14. aug. 2023 kl. 14.46 skrev Torben Nielsen @.***>:

I cant do that either, sorry cant help with that :(

Den man. 14. aug. 2023 kl. 13.30 skrev Rici Mainly < @.***>:

Hi @Sleazified https://github.com/Sleazified

But when I try to change climate sensor I receive an error https://community.home-assistant.io/t/how-to-connect-to-nibe-heat-pump-without-the-cloud/381099/166?u=richi44

— Reply to this email directly, view it on GitHub https://github.com/elupus/esphome-nibe/issues/30#issuecomment-1677151108, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKGBMI656UCXMMPPR6UI5NTXVID5TANCNFSM6AAAAAAWY7EUE4 . You are receiving this because you were mentioned.Message ID: @.***>

--

Torben Rosenberg Nielsen

--

Torben Rosenberg Nielsen

[rici44]

Hi @Sleazified. The climate integration is the most common way to control heating inside the house for the people inside. Its common thermostat which everybody is able to manage. I do not want to expose other settings of heat pump for everybody at home.

[elupus]

The climate entity should work. But what are you trying to do? Changing mode is not really supported on the pump. It will always work against its degreeminutes, and use that to decide when to heat or not.

Target temperature should work.

[rici44]

Hi @elupus Climate entity just is not working, do not know why. When I want to change target temperature it will show "Failed to call service climate/set_temperature. ‘set_temperature’ requires ‘hvac_mode’ when passing 'temperature and ‘hvac_mode’ is not already set to ‘heat’ or ‘cool’ "

https://community.home-assistant.io/t/how-to-connect-to-nibe-heat-pump-without-the-cloud/381099/169?u=richi44