search

emmebrusa / TSDZ2-Smart-EBike-1

TSDZ2 Open Source Firmware adapted to VLCD5-VLCD6-XH18 displays
GNU General Public License v3.0
137 stars 34 forks source link

TSDZ2 battery consumption #110

Open getenvy89 opened 1 month ago

getenvy89 commented 1 month ago

Hello! I used your firmware to improve engine performance, and I have a question about the firmware parameters. I mainly use assistant levels 2 and 3 on the stock engine and differentiated the levels in the firmware similarly. There is a problem with energy consumption; it is approximately the same at levels 2 and 3, even though level 3 is more powerful. What could be the issue with the parameter settings? TSDZ2 parametr 2 TSDZ2 parametr 1

dzid26 commented 1 month ago

I think your issue description need to be more precise.

Energy consumption depends mainly how fast you ride and how many times you have accelerated.

I am assuming you are using eMTB assist mode.

getenvy89 commented 1 month ago

I'm using eMTB mode.

Battery consumption with my settings at levels 2 - 3 - 4 is approximately the same.

My battery is 14.4ah and lasts for about 60 km (level 2 60% / level 3 40%).

The speed is no more than 35 km/h, engine no longer moves.

Config Bike: 26x2.25, 36T narrow wide, 11-36 cassette shimano slx 10sp

kiwisibk commented 1 month ago

I would also be interested to know what parameters you can use to get the best possible range. I also only have a 12.5 Ah battery and a 48V 750W motor. Ideally, I would like the best possible range configuration with the option of switching to power mode for a short time if necessary. Thank you