emmebrusa / TSDZ2-Smart-EBike-1

TSDZ2 Open Source Firmware adapted to VLCD5-VLCD6-XH18 displays
GNU General Public License v3.0
141 stars 34 forks source link

Limit power assist mode to 250W? #91

Open kiwisibk opened 5 months ago

kiwisibk commented 5 months ago

Hello everyone,

if you have a 48V 750W motor, is it possible to limit the power assist mode to 250W? So that you are legally OK in the EU with max. 250W and 25kmh?

Many thanks for your feedback!

dzid26 commented 5 months ago

Have you tried reading the manual?

image
kiwisibk commented 5 months ago

Street mode is clear, I want the 250W in power assist mode. But I think I have understood that you set it in the "Battery Power Max" field.

dzid26 commented 5 months ago

If you put 250W Street power limit it will also apply to Power assist.

Street / offroad modes are not separate assist modes. Those limits are applied on top of assist modes.

You can ride with Power Assist on the street (where legal limits would apply) and offroad (where you don't care). It is in Street mode by default. https://github.com/emmebrusa/TSDZ2-Smart-EBike-1/blob/master/manuals/EN-Operating_manual_of%20_display-TSDZ2-v20.1C.2.pdf

kiwisibk commented 5 months ago

Great, thank you.

Can you perhaps explain to me the button sequence on the VLCD6 to disable street mode if it is set as default at startup?

Thanks again

dzid26 @.***> schrieb am Mi. 10. Apr. 2024 um 14:16:

If you put 250W Street power limit it will also apply to Power assist.

Street / offroad modes are not separate assist modes. Those limits are applied on top of assist modes.

You can ride with Power Assist on the street (where legal limits would apply) and offroad (where you don't care). It is in Street mode by default. https://github.com/emmebrusa/TSDZ2-Smart-EBike-1/blob/master/manuals/EN-Operating_manual_of%20_display-TSDZ2-v20.1C.2.pdf

— Reply to this email directly, view it on GitHub https://github.com/emmebrusa/TSDZ2-Smart-EBike-1/issues/91#issuecomment-2047391510, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHUUZW4ESDSCEE2LFLVBNXLY4UUTVAVCNFSM6AAAAABF73KMYCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANBXGM4TCNJRGA . You are receiving this because you authored the thread.Message ID: @.***>

KILLERD0G commented 1 month ago

MY 250w 36v settings that work well. Advanced Assist Basic