STEP file gives warning in PrusaSlicer 2.7.1

emoshou / tinyframe

tinyFrame is a modular tooling framing system focused on ease of manufacture, reusability and accuracy.

http://www.tinyframe.dev

Other

11 stars 0 forks source link

STEP file gives warning in PrusaSlicer 2.7.1 #2

Open hkienle opened 10 months ago

hkienle commented 10 months ago

I don't use STEP files usually, so I have no idea if it's a problem with the FreeCAD export or with PrusaSlicer. (I will create a STL from FreeCAD, this is what I usually do anyways.)

hkienle commented 10 months ago

Looks like the problem is with the model itself.

emoshou commented 10 months ago

Thanks @hkienle. I've been having issues with STP outputs recently but I now have a workaround.

A new version (B) of the system will be out today. It will use one type of connector and simplify things. I'll ensure there aren't any STP output issues this time. Let me know if I miss anything.

hkienle commented 10 months ago

Perhaps check the model with Part WB: Part > Check geometry. I am getting "invalid shape" when I enable "Run boolean operation check". But the STEP has to be only good enough for the slicer to accept it or auto-repair it, I guess... :)

emoshou commented 10 months ago

@hkienle version 1 is officially released and should fix the issues you saw. Note that C6-X-X connectors are going to replace all of the CX-X-X connectors. I know this can be confusing and I'm working on documentation.