The ChameleonMini is a versatile contactless smartcard emulator compliant to NFC. The ChameleonMini was developed by https://kasper-oswald.de. The device is available at https://shop.kasper.it. For further information see the Getting Started Page https://rawgit.com/emsec/ChameleonMini/master/Doc/Doxygen/html/_page__getting_started.html or the Wiki tab above.
Other
1.73k
stars
392
forks
source link
Pin Command to use the exposed Pad PE0 on the back of the ChameleonMini Rev-G #273
As there is a for now unused exposed pad on the back side of the ChameleonMini Rev-G I quickly added a command PIN that easily can make use of this pin. It allows the following settings:
NONE: PE0 is High-Z like without this feature (default)
ON: PE0 is set to 3.3 volts
OFF: PE0 is set to 0 volts
1 - 5: PE0 is set to 3.3 volts for approximately n times 100 ms, afterwards reset to 0 volts
As there is a for now unused exposed pad on the back side of the ChameleonMini Rev-G I quickly added a command
PIN
that easily can make use of this pin. It allows the following settings:NONE
: PE0 is High-Z like without this feature (default)ON
: PE0 is set to 3.3 voltsOFF
: PE0 is set to 0 volts1
-5
: PE0 is set to 3.3 volts for approximately n times 100 ms, afterwards reset to 0 volts